Skip to content

Latest commit

 

History

History
87 lines (62 loc) · 2.79 KB

Setup.md

File metadata and controls

87 lines (62 loc) · 2.79 KB
Raw

OpenWrt Develop Environment Setup

OS

OpenWrt build system is the buildsystem for the OpenWrt Linux distribution. OpenWrt build system works on Linux, BSD or MacOSX operating system. A case-sensitive filesystem is required.

It is recommended that you use a Linux distribution (Debian or Ubuntu), either a standalone installation or one running in a virtual environment (VirtualBox or VMware).

Toolchain

sudo apt-get update
sudo apt-get install git-core build-essential libssl-dev libncurses5-dev unzip gawk
sudo apt-get install subversion mercurial

https://wiki.openwrt.org/doc/howto/buildroot.exigence

Download Source Code

  1. Init source

    Clone openwrt source from GitHub

    git clone [email protected]:openwrt/openwrt.git

    Or from https://git.openwrt.org

    git clone https://git.openwrt.org/openwrt.git

    Sometime GitHub may be very slow :-(.

    To speed up code downloading, you can copy the source repo from share drive at \\mua\文档\嵌入式\openwrt\openwrt.tar.bz2.

    $ mkdir openwrt
$ tar jxvf openwrt.tar.bz2 -C openwrt
$ cd openwrt
$ git reset --hard

  2. Modify feeds.conf.default to the following settings:

    src-git packages https://github.com/openwrt/packages.git;for-15.05
src-git luci https://github.com/openwrt/luci.git;for-15.05
src-git routing https://github.com/openwrt-routing/packages.git;for-15.05
src-git telephony https://github.com/openwrt/telephony.git;for-15.05
src-git management https://github.com/openwrt-management/packages.git;for-15.05
#src-git targets https://github.com/openwrt/targets.git
#src-git oldpackages http://git.openwrt.org/packages.git
#src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package
#src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone
#src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl
#src-svn xorg svn://svn.openwrt.org/openwrt/feeds/xorg
#src-svn desktop svn://svn.openwrt.org/openwrt/feeds/desktop
#src-svn xfce svn://svn.openwrt.org/openwrt/feeds/xfce
#src-svn lxde svn://svn.openwrt.org/openwrt/feeds/lxde
#src-link custom /usr/src/openwrt/custom-feed

    Download here.

  3. Copy \\mua\文档\嵌入式\openwrt\dl to openwrt source root (optional, strongly recommended to speed up building)

  4. Now you can start build openwrt

    $ ./scripts/feeds update -a
$ ./scripts/feeds install -a
$ $ make menuconfig
Select the target:
Target System (Ralink RT288x/RT3xxx) --->
Subtarget (MT7688 based boards) --->
Target Profile(Default Profile) --->

$ make

    NOTE: Target System, Subtarget and Target Profile may be not same as above, select the proper one to match your target board.

Reference