Skip to content

Latest commit

 

History

History
42 lines (35 loc) · 1.81 KB

burn-example.md

File metadata and controls

42 lines (35 loc) · 1.81 KB
Raw

OpenIPC Wiki

Table of Content

Notes on installing OpenIPC using Burn

Guideline flash GK7205V210 with locked bootloader

Preamble

My opinion is that - instructions for beginners should be written by beginners.
As soon as a gentleman end flashing 2-3 boards, his skills increase to 50 level 
and he does not want to remember the little things that are important for beginners.

Before starting work, watch the video on our YouTube channel

  • Download Burn
  • Install PUTTY and TFTP server
  • Turn off camera power, Connect USB com FTDI to your camera, specify which COM port on your PC
  • Enter burn folder and run the following cmd (Focus only serial port, in my case it is COM4, other params dont care, it worked with my GK7205V210):
  • Use U-Boot loader from the Burn repository only !
python burn --chip hi3516ev200 --file=u-boot/gk7205v200.bin -p COM4 --break && putty.exe -serial COM4 -sercfg 115200,8,n,1,N
  • Power on your camera with power supply, and wait putty throw out with console
  • Press enter, then you will see "goke" in the console
  • Run TFTP server, specify bin file's path
  • Now follow up as generated instruction which from OpenIPC site:
# Enter commands line by line! Do not copy and paste multiple lines at once!
setenv ipaddr 192.168.0.10; setenv serverip 192.168.0.40
mw.b 0x42000000 0xff 0x800000
tftpboot 0x42000000 openipc-FULL-FIRMWARE-IMAGE.bin
sf probe 0; sf lock 0;
sf erase 0x0 0x800000; sf write 0x42000000 0x0 0x800000
reset
Ctrl + c quickly during booting
# Enter commands line by line! Do not copy and paste multiple lines at once!run setnor8m