Windows + OPenHantek 3.3.3 problems

[Wawavoun]

Hi,

I know Windows port of OpenHantek is not supported but I ask in case of somebody has already solve this problem.

I have a 6022 without logic analyzer and use the X86_64 zip file.

Under W10 I first give a try to OpenHantek 3.3.3 using the included driver.
Running the program I get a black screen.
There no warning, no error message, nothing... The program look to be running. I can resize the windows.
I think the firmware goes up (the led become fixed green on the scope) and I can see some fugitive white rectangles with numbers and the "ms" unit into this black windows if I do a left click... but nothing else (no menu, no curves, just the windows header and a black rectangle).

Then I come back to 3.3.2-1.
I dont reinstall the driver, I have just to run vcredist and then everything run well. I can do measurements etc...

I noticed at this moment that the zip are very different between these versions.
In 3.3.2-2 and 3.3.3 everything seems to be embeded into the exe instead of a lot of dll into the older version.

Thinking to future I expect to run the last version. Is there something to do ?

Regards.
Philippe