Skip to content

Latest commit

 

History

History
29 lines (22 loc) · 1.27 KB

README.md

File metadata and controls

29 lines (22 loc) · 1.27 KB
Raw

Introduction

This code is a fork from Sprite_tm's ESPeink project. I only made minor changes and added a script to be able to compile it against up to date esp-open-sdk.

How to install the tools

  1. Clone the project git clone https://github.com/Oliv4945/eink.git
  2. Go to the new directory cd eink
  3. Run the setup, it will donwload and parameter all tools ./setup.sh
  4. Wait... from 30 to 60 min

Then the firmware should be compiled (in firmware/), and the statics file generated in webpages.espfs.

Upload

Edit the Makefile according to your board.

  • None - No specific reset procedure, done by yourself
  • ck
  • wifio
  • nodemcu - NodeMCU and Wemos Mini D1 boards

Then make flash, and make htmlflash

TODO

The current code use an old SDK (1.0.1), I converted it to the last one (2.0.0) but the code need some cleanup before pushing it.

Original README from Sprite_tm

This code uses esphttpd, which needs Heatshrink. To get the code for Heatshrink, do: git submodule init git submodule update

This code is licensed under the Beer-Ware license, as indicated in the sources.