Cannot compile dotOS for star2qltechn apparently because of kernel #1
Comments
FranGamer1892
changed the title
|
Also used this for all dependencies: https://developer.sony.com/develop/open-devices/guides/aosp-build-instructions/build-aosp-android-android-11-0-0/. I am on Debian Buster. |
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
[ Upstream commit 6da9f775175e516fc7229ceaa9b54f8f56aa7924 ] When debugging options are turned on, the rcu_read_lock() function might not be inlined. This results in lockdep's print_lock() function printing "rcu_read_lock+0x0/0x70" instead of rcu_read_lock()'s caller. For example: [ 10.579995] ============================= [ 10.584033] WARNING: suspicious RCU usage [ 10.588074] 4.18.0.memcg_v2+ Nyoutaaa#1 Not tainted [ 10.593162] ----------------------------- [ 10.597203] include/linux/rcupdate.h:281 Illegal context switch in RCU read-side critical section! [ 10.606220] [ 10.606220] other info that might help us debug this: [ 10.606220] [ 10.614280] [ 10.614280] rcu_scheduler_active = 2, debug_locks = 1 [ 10.620853] 3 locks held by systemd/1: [ 10.624632] #0: (____ptrval____) (&type->i_mutex_dir_key#5){.+.+}, at: lookup_slow+0x42/0x70 [ 10.633232] Nyoutaaa#1: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70 [ 10.640954] #2: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70 These "rcu_read_lock+0x0/0x70" strings are not providing any useful information. This commit therefore forces inlining of the rcu_read_lock() function so that rcu_read_lock()'s caller is instead shown. Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
[ Upstream commit b387e9b58679c60f5b1e4313939bd4878204fc37 ]
When system memory is in heavy pressure, bch_gc_thread_start() from
run_cache_set() may fail due to out of memory. In such condition,
c->gc_thread is assigned to -ENOMEM, not NULL pointer. Then in following
failure code path bch_cache_set_error(), when cache_set_flush() gets
called, the code piece to stop c->gc_thread is broken,
if (!IS_ERR_OR_NULL(c->gc_thread))
kthread_stop(c->gc_thread);
And KASAN catches such NULL pointer deference problem, with the warning
information:
[ 561.207881] ==================================================================
[ 561.207900] BUG: KASAN: null-ptr-deref in kthread_stop+0x3b/0x440
[ 561.207904] Write of size 4 at addr 000000000000001c by task kworker/15:1/313
[ 561.207913] CPU: 15 PID: 313 Comm: kworker/15:1 Tainted: G W 5.0.0-vanilla+ #3
[ 561.207916] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE136T-2.10]- 03/22/2019
[ 561.207935] Workqueue: events cache_set_flush [bcache]
[ 561.207940] Call Trace:
[ 561.207948] dump_stack+0x9a/0xeb
[ 561.207955] ? kthread_stop+0x3b/0x440
[ 561.207960] ? kthread_stop+0x3b/0x440
[ 561.207965] kasan_report+0x176/0x192
[ 561.207973] ? kthread_stop+0x3b/0x440
[ 561.207981] kthread_stop+0x3b/0x440
[ 561.207995] cache_set_flush+0xd4/0x6d0 [bcache]
[ 561.208008] process_one_work+0x856/0x1620
[ 561.208015] ? find_held_lock+0x39/0x1d0
[ 561.208028] ? drain_workqueue+0x380/0x380
[ 561.208048] worker_thread+0x87/0xb80
[ 561.208058] ? __kthread_parkme+0xb6/0x180
[ 561.208067] ? process_one_work+0x1620/0x1620
[ 561.208072] kthread+0x326/0x3e0
[ 561.208079] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 561.208090] ret_from_fork+0x3a/0x50
[ 561.208110] ==================================================================
[ 561.208113] Disabling lock debugging due to kernel taint
[ 561.208115] irq event stamp: 11800231
[ 561.208126] hardirqs last enabled at (11800231): [<ffffffff83008538>] do_syscall_64+0x18/0x410
[ 561.208127] BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
[ 561.208129] #PF error: [WRITE]
[ 561.312253] hardirqs last disabled at (11800230): [<ffffffff830052ff>] trace_hardirqs_off_thunk+0x1a/0x1c
[ 561.312259] softirqs last enabled at (11799832): [<ffffffff850005c7>] __do_softirq+0x5c7/0x8c3
[ 561.405975] PGD 0 P4D 0
[ 561.442494] softirqs last disabled at (11799821): [<ffffffff831add2c>] irq_exit+0x1ac/0x1e0
[ 561.791359] Oops: 0002 [Nyoutaaa#1] SMP KASAN NOPTI
[ 561.791362] CPU: 15 PID: 313 Comm: kworker/15:1 Tainted: G B W 5.0.0-vanilla+ #3
[ 561.791363] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE136T-2.10]- 03/22/2019
[ 561.791371] Workqueue: events cache_set_flush [bcache]
[ 561.791374] RIP: 0010:kthread_stop+0x3b/0x440
[ 561.791376] Code: 00 00 65 8b 05 26 d5 e0 7c 89 c0 48 0f a3 05 ec aa df 02 0f 82 dc 02 00 00 4c 8d 63 20 be 04 00 00 00 4c 89 e7 e8 65 c5 53 00 <f0> ff 43 20 48 8d 7b 24 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48
[ 561.791377] RSP: 0018:ffff88872fc8fd10 EFLAGS: 00010286
[ 561.838895] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838916] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838934] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838948] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838966] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838979] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 561.838996] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 563.067028] RAX: 0000000000000000 RBX: fffffffffffffffc RCX: ffffffff832dd314
[ 563.067030] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000297
[ 563.067032] RBP: ffff88872fc8fe88 R08: fffffbfff0b8213d R09: fffffbfff0b8213d
[ 563.067034] R10: 0000000000000001 R11: fffffbfff0b8213c R12: 000000000000001c
[ 563.408618] R13: ffff88dc61cc0f68 R14: ffff888102b94900 R15: ffff88dc61cc0f68
[ 563.408620] FS: 0000000000000000(0000) GS:ffff888f7dc00000(0000) knlGS:0000000000000000
[ 563.408622] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 563.408623] CR2: 000000000000001c CR3: 0000000f48a1a004 CR4: 00000000007606e0
[ 563.408625] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 563.408627] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 563.904795] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 563.915796] PKRU: 55555554
[ 563.915797] Call Trace:
[ 563.915807] cache_set_flush+0xd4/0x6d0 [bcache]
[ 563.915812] process_one_work+0x856/0x1620
[ 564.001226] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 564.033563] ? find_held_lock+0x39/0x1d0
[ 564.033567] ? drain_workqueue+0x380/0x380
[ 564.033574] worker_thread+0x87/0xb80
[ 564.062823] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 564.118042] ? __kthread_parkme+0xb6/0x180
[ 564.118046] ? process_one_work+0x1620/0x1620
[ 564.118048] kthread+0x326/0x3e0
[ 564.118050] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 564.167066] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 564.252441] ret_from_fork+0x3a/0x50
[ 564.252447] Modules linked in: msr rpcrdma sunrpc rdma_ucm ib_iser ib_umad rdma_cm ib_ipoib i40iw configfs iw_cm ib_cm libiscsi scsi_transport_iscsi mlx4_ib ib_uverbs mlx4_en ib_core nls_iso8859_1 nls_cp437 vfat fat intel_rapl skx_edac x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ses raid0 aesni_intel cdc_ether enclosure usbnet ipmi_ssif joydev aes_x86_64 i40e scsi_transport_sas mii bcache md_mod crypto_simd mei_me ioatdma crc64 ptp cryptd pcspkr i2c_i801 mlx4_core glue_helper pps_core mei lpc_ich dca wmi ipmi_si ipmi_devintf nd_pmem dax_pmem nd_btt ipmi_msghandler device_dax pcc_cpufreq button hid_generic usbhid mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect xhci_pci sysimgblt fb_sys_fops xhci_hcd ttm megaraid_sas drm usbcore nfit libnvdimm sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua efivarfs
[ 564.299390] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[ 564.348360] CR2: 000000000000001c
[ 564.348362] ---[ end trace b7f0e5cc7b2103b0 ]---
Therefore, it is not enough to only check whether c->gc_thread is NULL,
we should use IS_ERR_OR_NULL() to check both NULL pointer and error
value.
This patch changes the above buggy code piece in this way,
if (!IS_ERR_OR_NULL(c->gc_thread))
kthread_stop(c->gc_thread);
Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
[ Upstream commit 78226f6eaac80bf30256a33a4926c194ceefdf36 ] This is for fixing bug KMSAN: uninit-value in ax88772_bind Tested by https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ Reported-by: [email protected] syzbot found the following crash on: HEAD commit: f75e4cfe kmsan: use kmsan_handle_urb() in urb.c git tree: kmsan console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000 kernel config: https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a dashboard link: https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e compiler: clang version 9.0.0 (/home/glider/llvm/clang 06d00afa61eef8f7f501ebdb4e8612ea43ec2d78) syz repro: https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000 ================================================================== BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:200 [inline] BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline] BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724 CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ Nyoutaaa#1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 is_valid_ether_addr include/linux/etherdevice.h:200 [inline] asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline] ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724 usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728 usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361 really_probe+0xdae/0x1d80 drivers/base/dd.c:513 driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671 __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778 bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454 __device_attach+0x454/0x730 drivers/base/dd.c:844 device_initial_probe+0x4a/0x60 drivers/base/dd.c:891 bus_probe_device+0x137/0x390 drivers/base/bus.c:514 device_add+0x288d/0x30e0 drivers/base/core.c:2106 usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027 generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210 usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266 really_probe+0xdae/0x1d80 drivers/base/dd.c:513 driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671 __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778 bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454 __device_attach+0x454/0x730 drivers/base/dd.c:844 device_initial_probe+0x4a/0x60 drivers/base/dd.c:891 bus_probe_device+0x137/0x390 drivers/base/bus.c:514 device_add+0x288d/0x30e0 drivers/base/core.c:2106 usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432 process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269 process_scheduled_works kernel/workqueue.c:2331 [inline] worker_thread+0x189c/0x2460 kernel/workqueue.c:2417 kthread+0x4b5/0x4f0 kernel/kthread.c:254 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355 Signed-off-by: Phong Tran <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
[ Upstream commit 3f167e1921865b379a9becf03828e7202c7b4917 ]
ipv4_pdp_add() is called in RCU read-side critical section.
So GFP_KERNEL should not be used in the function.
This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL.
Test commands:
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2
Splat looks like:
[ 130.618881] =============================
[ 130.626382] WARNING: suspicious RCU usage
[ 130.626994] 5.2.0-rc6+ #50 Not tainted
[ 130.627622] -----------------------------
[ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section!
[ 130.629684]
[ 130.629684] other info that might help us debug this:
[ 130.629684]
[ 130.631022]
[ 130.631022] rcu_scheduler_active = 2, debug_locks = 1
[ 130.632136] 4 locks held by gtp-tunnel/1025:
[ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40
[ 130.634159] Nyoutaaa#1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130
[ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp]
[ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp]
[ 130.638348]
[ 130.638348] stack backtrace:
[ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50
[ 130.641318] Call Trace:
[ 130.641707] dump_stack+0x7c/0xbb
[ 130.642252] ___might_sleep+0x2c0/0x3b0
[ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0
[ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp]
[ 130.644371] genl_family_rcv_msg+0x63a/0x1030
[ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090
[ 130.645845] ? genl_unregister_family+0x630/0x630
[ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0
[ 130.647293] ? check_flags.part.40+0x440/0x440
[ 130.648099] genl_rcv_msg+0xa3/0x130
[ ... ]
Fixes: 459aa66 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
[ Upstream commit a2bed90704c68d3763bf24decb1b781a45395de8 ]
Current gtp_newlink() could be called after unregister_pernet_subsys().
gtp_newlink() uses gtp_net but it can be destroyed by
unregister_pernet_subsys().
So unregister_pernet_subsys() should be called after
rtnl_link_unregister().
Test commands:
#SHELL 1
while :
do
for i in {1..5}
do
./gtp-link add gtp$i &
done
killall gtp-link
done
#SHELL 2
while :
do
modprobe -rv gtp
done
Splat looks like:
[ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126
[ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50
[ 753.185801] Call Trace:
[ 753.186264] dump_stack+0x7c/0xbb
[ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.187583] print_address_description+0xc7/0x240
[ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.189846] __kasan_report+0x12a/0x16f
[ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.191298] kasan_report+0xe/0x20
[ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.192580] ? __netlink_ns_capable+0xc3/0xf0
[ 753.193370] __rtnl_newlink+0xb9f/0x11b0
[ ... ]
[ 753.241201] Allocated by task 7186:
[ 753.241844] save_stack+0x19/0x80
[ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0
[ 753.243192] __kmalloc+0x13e/0x300
[ 753.243764] ops_init+0xd6/0x350
[ 753.244314] register_pernet_operations+0x249/0x6f0
[ ... ]
[ 753.251770] Freed by task 7178:
[ 753.252288] save_stack+0x19/0x80
[ 753.252833] __kasan_slab_free+0x111/0x150
[ 753.253962] kfree+0xc7/0x280
[ 753.254509] ops_free_list.part.11+0x1c4/0x2d0
[ 753.255241] unregister_pernet_operations+0x262/0x390
[ ... ]
[ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next.
[ 753.287241] ------------[ cut here ]------------
[ 753.287794] kernel BUG at lib/list_debug.c:25!
[ 753.288364] invalid opcode: 0000 [Nyoutaaa#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50
[ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0
[ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b
[ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286
[ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000
[ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69
[ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21
[ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878
[ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458
[ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000
[ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0
[ 753.302183] Call Trace:
[ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp]
[ 753.303037] ? __netlink_ns_capable+0xc3/0xf0
[ 753.303576] __rtnl_newlink+0xb9f/0x11b0
[ 753.304092] ? rtnl_link_unregister+0x230/0x230
Fixes: 459aa66 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
commit d4548543fc4ece56c6f04b8586f435fb4fd84c20 upstream. KASAN report this: BUG: unable to handle kernel paging request at ffffffffa0097000 PGD 3870067 P4D 3870067 PUD 3871063 PMD 2326e2067 PTE 0 Oops: 0000 [Nyoutaaa#1 CPU: 0 PID: 5340 Comm: modprobe Not tainted 5.1.0-rc7+ #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_add_valid+0x10/0x70 Code: c3 48 8b 06 55 48 89 e5 5d 48 39 07 0f 94 c0 0f b6 c0 c3 90 90 90 90 90 90 90 55 48 89 d0 48 8b 52 08 48 89 e5 48 39 f2 75 19 <48> 8b 32 48 39 f0 75 3a RSP: 0018:ffffc90000e23c68 EFLAGS: 00010246 RAX: ffffffffa00ad000 RBX: ffffffffa009d000 RCX: 0000000000000000 RDX: ffffffffa0097000 RSI: ffffffffa0097000 RDI: ffffffffa009d000 RBP: ffffc90000e23c68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0097000 R13: ffff888231797180 R14: 0000000000000000 R15: ffffc90000e23e78 FS: 00007fb215285540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0097000 CR3: 000000022f144000 CR4: 00000000000006f0 Call Trace: v9fs_register_trans+0x2f/0x60 [9pnet ? 0xffffffffa0087000 p9_virtio_init+0x25/0x1000 [9pnet_virtio do_one_initcall+0x6c/0x3cc ? kmem_cache_alloc_trace+0x248/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fb214d8e839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 RSP: 002b:00007ffc96554278 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055e67eed2aa0 RCX: 00007fb214d8e839 RDX: 0000000000000000 RSI: 000055e67ce95c2e RDI: 0000000000000003 RBP: 000055e67ce95c2e R08: 0000000000000000 R09: 000055e67eed2aa0 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 000055e67eeda500 R14: 0000000000040000 R15: 000055e67eed2aa0 Modules linked in: 9pnet_virtio(+) 9pnet gre rfkill vmw_vsock_virtio_transport_common vsock [last unloaded: 9pnet_virtio CR2: ffffffffa0097000 ---[ end trace 4a52bb13ff07b761 If register_virtio_driver() fails in p9_virtio_init, we should call v9fs_unregister_trans() to do cleanup. Link: http://lkml.kernel.org/r/[email protected] Cc: [email protected] Reported-by: Hulk Robot <[email protected]> Fixes: b530cc7 ("9p: add virtio transport") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: Dominique Martinet <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
…ling [ Upstream commit e57f61858b7cf478ed6fa23ed4b3876b1c9625c4 ] We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ Nyoutaaa#1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20a ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by: Martin Weinelt <[email protected]> Signed-off-by: Nikolay Aleksandrov <[email protected]> Tested-by: Martin Weinelt <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
[ Upstream commit 181fa434d0514e40ebf6e9721f2b72700287b6e2 ] According to the PCI Local Bus specification Revision 3.0, section 6.8.1.3 (Message Control for MSI), endpoints that are Multiple Message Capable as defined by bits [3:1] in the Message Control for MSI can request a number of vectors that is power of two aligned. As specified in section 6.8.1.6 "Message data for MSI", the Multiple Message Enable field (bits [6:4] of the Message Control register) defines the number of low order message data bits the function is permitted to modify to generate its system software allocated vectors. The MSI controller in the Xilinx NWL PCIe controller supports a number of MSI vectors specified through a bitmap and the hwirq number for an MSI, that is the value written in the MSI data TLP is determined by the bitmap allocation. For instance, in a situation where two endpoints sitting on the PCI bus request the following MSI configuration, with the current PCI Xilinx bitmap allocation code (that does not align MSI vector allocation on a power of two boundary): Endpoint Nyoutaaa#1: Requesting 1 MSI vector - allocated bitmap bits 0 Endpoint #2: Requesting 2 MSI vectors - allocated bitmap bits [1,2] The bitmap value(s) corresponds to the hwirq number that is programmed into the Message Data for MSI field in the endpoint MSI capability and is detected by the root complex to fire the corresponding MSI irqs. The value written in Message Data for MSI field corresponds to the first bit allocated in the bitmap for Multi MSI vectors. The current Xilinx NWL MSI allocation code allows a bitmap allocation that is not a power of two boundaries, so endpoint #2, is allowed to toggle Message Data bit[0] to differentiate between its two vectors (meaning that the MSI data will be respectively 0x0 and 0x1 for the two vectors allocated to endpoint #2). This clearly aliases with the Endpoint Nyoutaaa#1 vector allocation, resulting in a broken Multi MSI implementation. Update the code to allocate MSI bitmap ranges with a power of two alignment, fixing the bug. Fixes: ab597d3 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller") Suggested-by: Marc Zyngier <[email protected]> Signed-off-by: Bharat Kumar Gogada <[email protected]> [[email protected]: updated commit log] Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Marc Zyngier <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
[ Upstream commit 80bf6ceaf9310b3f61934c69b382d4912deee049 ]
When we get into activate_mm(), lockdep complains that we're doing
something strange:
WARNING: possible circular locking dependency detected
5.1.0-10252-gb00152307319-dirty #121 Not tainted
------------------------------------------------------
inside.sh/366 is trying to acquire lock:
(____ptrval____) (&(&p->alloc_lock)->rlock){+.+.}, at: flush_old_exec+0x703/0x8d7
but task is already holding lock:
(____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> Nyoutaaa#1 (&mm->mmap_sem){++++}:
[...]
__lock_acquire+0x12ab/0x139f
lock_acquire+0x155/0x18e
down_write+0x3f/0x98
flush_old_exec+0x748/0x8d7
load_elf_binary+0x2ca/0xddb
[...]
-> #0 (&(&p->alloc_lock)->rlock){+.+.}:
[...]
__lock_acquire+0x12ab/0x139f
lock_acquire+0x155/0x18e
_raw_spin_lock+0x30/0x83
flush_old_exec+0x703/0x8d7
load_elf_binary+0x2ca/0xddb
[...]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(&(&p->alloc_lock)->rlock);
lock(&mm->mmap_sem);
lock(&(&p->alloc_lock)->rlock);
*** DEADLOCK ***
2 locks held by inside.sh/366:
#0: (____ptrval____) (&sig->cred_guard_mutex){+.+.}, at: __do_execve_file+0x12d/0x869
Nyoutaaa#1: (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7
stack backtrace:
CPU: 0 PID: 366 Comm: inside.sh Not tainted 5.1.0-10252-gb00152307319-dirty #121
Stack:
[...]
Call Trace:
[<600420de>] show_stack+0x13b/0x155
[<6048906b>] dump_stack+0x2a/0x2c
[<6009ae64>] print_circular_bug+0x332/0x343
[<6009c5c6>] check_prev_add+0x669/0xdad
[<600a06b4>] __lock_acquire+0x12ab/0x139f
[<6009f3d0>] lock_acquire+0x155/0x18e
[<604a07e0>] _raw_spin_lock+0x30/0x83
[<60151e6a>] flush_old_exec+0x703/0x8d7
[<601a8eb8>] load_elf_binary+0x2ca/0xddb
[...]
I think it's because in exec_mmap() we have
down_read(&old_mm->mmap_sem);
...
task_lock(tsk);
...
activate_mm(active_mm, mm);
(which does down_write(&mm->mmap_sem))
I'm not really sure why lockdep throws in the whole knowledge
about the task lock, but it seems that old_mm and mm shouldn't
ever be the same (and it doesn't deadlock) so tell lockdep that
they're different.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
commit f16d80b75a096c52354c6e0a574993f3b0dfbdfe upstream. On systems like P9 powernv where we have no TM (or P8 booted with ppc_tm=off), userspace can construct a signal context which still has the MSR TS bits set. The kernel tries to restore this context which results in the following crash: Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033 Oops: Unrecoverable exception, sig: 6 [Nyoutaaa#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ffa4 #69 NIP: c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000 REGS: c00000003fffbd70 TRAP: 0700 Not tainted (5.2.0-11045-g7142b497d8) MSR: 8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]> CR: 42004242 XER: 00000000 CFAR: c0000000000022e0 IRQMASK: 0 GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669 GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000 GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420 GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000 GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000 GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728 NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80 LR [00007fffb2d67e48] 0x7fffb2d67e48 Call Trace: Instruction dump: e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00 e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18 The problem is the signal code assumes TM is enabled when CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as with P9 powernv or if `ppc_tm=off` is used on P8. This means any local user can crash the system. Fix the problem by returning a bad stack frame to the user if they try to set the MSR TS bits with sigreturn() on systems where TM is not supported. Found with sigfuz kernel selftest on P9. This fixes CVE-2019-13648. Fixes: 2b0a576 ("powerpc: Add new transactional memory state to the signal context") Cc: [email protected] # v3.9 Reported-by: Praveen Pandey <[email protected]> Signed-off-by: Michael Neuling <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
0xlynix
pushed a commit
to 0xlynix/LynxKernel
that referenced
this issue
Nov 27, 2021
[ Upstream commit dbbf2d1e4077bab0c65ece2765d3fc69cf7d610f ] tcp_write_queue_purge clears all the SKBs in the write queue but does not reset the sk_send_head. As a result, we can have a NULL pointer dereference anywhere that we use tcp_send_head instead of the tcp_write_queue_tail. For example, after a27fd7a8ed38 (tcp: purge write queue upon RST), we can purge the write queue on RST. Prior to 75c119afe14f (tcp: implement rb-tree based retransmit queue), tcp_push will only check tcp_send_head and then accesses tcp_write_queue_tail to send the actual SKB. As a result, it will dereference a NULL pointer. This has been reported twice for 4.14 where we don't have 75c119afe14f: By Timofey Titovets: [ 422.081094] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 [ 422.081254] IP: tcp_push+0x42/0x110 [ 422.081314] PGD 0 P4D 0 [ 422.081364] Oops: 0002 [Nyoutaaa#1] SMP PTI By Yongjian Xu: BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: tcp_push+0x48/0x120 PGD 80000007ff77b067 P4D 80000007ff77b067 PUD 7fd989067 PMD 0 Oops: 0002 [#18] SMP PTI Modules linked in: tcp_diag inet_diag tcp_bbr sch_fq iTCO_wdt iTCO_vendor_support pcspkr ixgbe mdio i2c_i801 lpc_ich joydev input_leds shpchp e1000e igb dca ptp pps_core hwmon mei_me mei ipmi_si ipmi_msghandler sg ses scsi_transport_sas enclosure ext4 jbd2 mbcache sd_mod ahci libahci megaraid_sas wmi ast ttm dm_mirror dm_region_hash dm_log dm_mod dax CPU: 6 PID: 14156 Comm: [ET_NET 6] Tainted: G D 4.14.26-1.el6.x86_64 Nyoutaaa#1 Hardware name: LENOVO ThinkServer RD440 /ThinkServer RD440, BIOS A0TS80A 09/22/2014 task: ffff8807d78d8140 task.stack: ffffc9000e944000 RIP: 0010:tcp_push+0x48/0x120 RSP: 0018:ffffc9000e947a88 EFLAGS: 00010246 RAX: 00000000000005b4 RBX: ffff880f7cce9c00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff8807d00f5000 RBP: ffffc9000e947aa8 R08: 0000000000001c84 R09: 0000000000000000 R10: ffff8807d00f5158 R11: 0000000000000000 R12: ffff8807d00f5000 R13: 0000000000000020 R14: 00000000000256d4 R15: 0000000000000000 FS: 00007f5916de9700(0000) GS:ffff88107fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000007f8226004 CR4: 00000000001606e0 Call Trace: tcp_sendmsg_locked+0x33d/0xe50 tcp_sendmsg+0x37/0x60 inet_sendmsg+0x39/0xc0 sock_sendmsg+0x49/0x60 sock_write_iter+0xb6/0x100 do_iter_readv_writev+0xec/0x130 ? rw_verify_area+0x49/0xb0 do_iter_write+0x97/0xd0 vfs_writev+0x7e/0xe0 ? __wake_up_common_lock+0x80/0xa0 ? __fget_light+0x2c/0x70 ? __do_page_fault+0x1e7/0x530 do_writev+0x60/0xf0 ? inet_shutdown+0xac/0x110 SyS_writev+0x10/0x20 do_syscall_64+0x6f/0x140 ? prepare_exit_to_usermode+0x8b/0xa0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x3135ce0c57 RSP: 002b:00007f5916de4b00 EFLAGS: 00000293 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000003135ce0c57 RDX: 0000000000000002 RSI: 00007f5916de4b90 RDI: 000000000000606f RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f5916de8c38 R10: 0000000000000000 R11: 0000000000000293 R12: 00000000000464cc R13: 00007f5916de8c30 R14: 00007f58d8bef080 R15: 0000000000000002 Code: 48 8b 97 60 01 00 00 4c 8d 97 58 01 00 00 41 b9 00 00 00 00 41 89 f3 4c 39 d2 49 0f 44 d1 41 81 e3 00 80 00 00 0f 85 b0 00 00 00 <80> 4a 38 08 44 8b 8f 74 06 00 00 44 89 8f 7c 06 00 00 83 e6 01 RIP: tcp_push+0x48/0x120 RSP: ffffc9000e947a88 CR2: 0000000000000038 ---[ end trace 8d545c2e93515549 ]--- There is other scenario which found in stable 4.4: Allocated: [<ffffffff82f380a6>] __alloc_skb+0xe6/0x600 net/core/skbuff.c:218 [<ffffffff832466c3>] alloc_skb_fclone include/linux/skbuff.h:856 [inline] [<ffffffff832466c3>] sk_stream_alloc_skb+0xa3/0x5d0 net/ipv4/tcp.c:833 [<ffffffff83249164>] tcp_sendmsg+0xd34/0x2b00 net/ipv4/tcp.c:1178 [<ffffffff83300ef3>] inet_sendmsg+0x203/0x4d0 net/ipv4/af_inet.c:755 Freed: [<ffffffff82f372fd>] __kfree_skb+0x1d/0x20 net/core/skbuff.c:676 [<ffffffff83288834>] sk_wmem_free_skb include/net/sock.h:1447 [inline] [<ffffffff83288834>] tcp_write_queue_purge include/net/tcp.h:1460 [inline] [<ffffffff83288834>] tcp_connect_init net/ipv4/tcp_output.c:3122 [inline] [<ffffffff83288834>] tcp_connect+0xb24/0x30c0 net/ipv4/tcp_output.c:3261 [<ffffffff8329b991>] tcp_v4_connect+0xf31/0x1890 net/ipv4/tcp_ipv4.c:246 BUG: KASAN: use-after-free in tcp_skb_pcount include/net/tcp.h:796 [inline] BUG: KASAN: use-after-free in tcp_init_tso_segs net/ipv4/tcp_output.c:1619 [inline] BUG: KASAN: use-after-free in tcp_write_xmit+0x3fc2/0x4cb0 net/ipv4/tcp_output.c:2056 [<ffffffff81515cd5>] kasan_report.cold.7+0x175/0x2f7 mm/kasan/report.c:408 [<ffffffff814f9784>] __asan_report_load2_noabort+0x14/0x20 mm/kasan/report.c:427 [<ffffffff83286582>] tcp_skb_pcount include/net/tcp.h:796 [inline] [<ffffffff83286582>] tcp_init_tso_segs net/ipv4/tcp_output.c:1619 [inline] [<ffffffff83286582>] tcp_write_xmit+0x3fc2/0x4cb0 net/ipv4/tcp_output.c:2056 [<ffffffff83287a40>] __tcp_push_pending_frames+0xa0/0x290 net/ipv4/tcp_output.c:2307 stable 4.4 and stable 4.9 don't have the commit abb4a8b870b5 ("tcp: purge write queue upon RST") which is referred in dbbf2d1e4077, in tcp_connect_init, it calls tcp_write_queue_purge, and does not reset sk_send_head, then UAF. stable 4.14 have the commit abb4a8b870b5 ("tcp: purge write queue upon RST"), in tcp_reset, it calls tcp_write_queue_purge(sk), and does not reset sk_send_head, then UAF. So this patch can be used to fix stable 4.4 and 4.9. Fixes: a27fd7a8ed38 (tcp: purge write queue upon RST) Reported-by: Timofey Titovets <[email protected]> Reported-by: Yongjian Xu <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Soheil Hassas Yeganeh <[email protected]> Tested-by: Yongjian Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Mao Wenan <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I am in the process of compiling dotOS for my Galaxy S9+ following this: https://github.com/DotOS/manifest. I am not sure why, but it fails during the kernel part, I tried compiling it individually but it also fails. Might be something related to this kernel source? I didn't touch anything apart from adding these to debconfig:
This is because I need KVM enabled (that's why I am doing all of this).
Greetings, Francisco.
(compressed because I can't upload original file to github)
build_error.zip
The text was updated successfully, but these errors were encountered: