Centrally managing NuGet packages

Status: Incubation, PM: Anand Gaurav

Requirements

As Noah, a developer who uses NuGet in an enterprise,

• I would like to manage all the package versions centrally at a repo level so that they do not go out of sync in the various projects in the repo.
• I can specify a range or float to latest version of a given package so that all projects in the repo always gets the latest available version when desired.
• I can lock down the package graph for the repo so that my builds are repeatable
  • I can lock down direct and transitive dependencies so that the build behavior does not change by resolving to a different version of a package version due to unavailability of previously resolved version.
  • I am able to lock down the integrity of the package so that so that the build behavior does not change by resolving to a different package with same ID+version.
  • I am able to lock the floating versions of packages to their respective resolved versions unless I explicitly ask the package to resolve to latest version.
• When I modify a common project that's a dependency of multiple projects in the repo, I should not be required to multiple checkins corresponding to each of the dependent projects.
  • E.g. Project A->B->C->D->...->X. If I change the PackageReference for X, I should be making limited changes related to only Project X and not multiple changes for each of the projects that depend on it. (This would be case with per project lock file).

Extensibility requirements:

• I am able to define a different set of packages and versions for a specific project in the repo that differs from the centrally managed packages+versions.
  • Correspondingly, I am able to lock down a different package graph for a specific project.
• (?) I am able to define package versions based on conditions.
  • Correspondingly, I am able to lock down different graphs based on these conditions.

Content Governance requirements (P2)

• I am able to scan the packages (full closure) used in the repo to flag non-compliance, licensing and vulnerabilities.

Context

PackageReference requirements summary | Epic issue #6763

Who is the customer?

Enterprise customers with huge code-base spanning 100s of projects.

Evidence

• Developers need this and have worked their way around in multiple ways. Some define the package version as a variable and then define all the version variables in a central file to control this behavior. E.g.

  <PackageReference Include="My.Sample.Lib" Version="$(MySampleLibVersion)" />
  

• MSBuild team has built an SDK project to implement this behavior: Microsoft.Build.CentralPackageVersions. This spec has taken inspiration from this.

Solution

Summary

• Package Versions can be centrally managed in packages.props file located at the repo root.
• Package references (PackageReference) managed at each project level without any version information.
• Managing packages for the repo/projects:
  • Adding packages references not listed in packages.props will be an error by default. An option to update packages.props file as part of adding the package reference will be available.
  • Updating package reference per project will be an error. An option to update in the packages.props file will be available.
  • Removing/uninstalling package references per project is allowed. There will be an option to do the same in the packages.props file.
• All the referenced packages and their transitive dependencies are locked in a lock file - packages.lock.json present at the level (same folder) as the packages.props file.
  • NuGet restore action, by default, will always resolve the dependencies using the lock file.
    • It will check if a referenced package (PackageReference in the project file) is already present in the packages.props file as well as the packages.lock,json file. If not, it errors out.
    • It will check if the version specified in packages.props match with packages.lock.json. If not, it errors out.
  • NuGet restore -update-lock-file action will be able to recompute dependencies and overwrite the lock file. A similar experience on VS will be available.

Details - Centrally managing package versions

To get started, you will need to create an MSBuild props file at the root of the solution/repo named packages.props that declares Package items.

In this example, packages like Newtonsoft.Json are set to exactly version 10.0.1. All projects that reference this package will be locked to that version. If someone attempts to specify a version in a project they will encounter a build error.

Packages.props

<?xml version="1.0" encoding="utf-8"?>
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <ItemGroup>
    <!-- Implicit Package References -->
    <Package Include="Microsoft.NETCore.App"    Version="[2.0.5]" />
    <Package Include="NETStandard.Library"      Version="[1.6.1]" />

    <Package Include="Microsoft.NET.Test.Sdk"   Version="[15.5.0]" />
    <Package Include="MSTest.TestAdapter"       Version="[1.1.18]" />
    <Package Include="MSTest.TestFramework"     Version="[1.1.18]" />
    <Package Include="Newtonsoft.Json"          Version="[10.0.1]" />
  </ItemGroup>
</Project>

SampleProject.csproj

<Project Sdk="Microsoft.NET.Sdk">

  <PropertyGroup>
    <TargetFramework>netstandard2.0</TargetFramework>
  </PropertyGroup>

  <ItemGroup>
    <PackageReference Include="Newtonsoft.Json" />
  </ItemGroup>
</Project>

Each project still has a PackageReference but must not specify a version. This ensures that the correct packages are referenced for each project.

Enforcement

// package exists in packages.props
ProjectA> dotnet add package netwonsoft.json 
Successfully added package 'Newtonsoft.Json' to ProjectA. 

// package does not exist in packages.props
ProjectA> dotnet add package netwonsoft.json 
NU1xxx: Cannot add package 'Newtonsoft.Json' to ProjectA as it is not specified in the central package version management 
 file '<path>\packages.props'. Use the command 'dotnet add package newtonsoft.json --version <version number> --update-version-management-file' to add the package reference to the project and update the central package version management file '<path>\packages.props', together.

ProjectA> dotnet add package newtonsoft.json --version 10.0.3 --update-version-management-file
Successfully added package 'Newtonsoft.Json version 10.0.3' '<path>\packages.props'.
Successfully added package 'Newtonsoft.Json' to ProjectA. 

ProjectA> dotnet add package netwonsoft.json --version 11.0.1
NU1xxx: You cannot specify the package version while adding a package reference. Package version version information is managed in the central package version management file '<path>\packages.props'. Use the command 'dotnet add package newtonsoft.json --version <version number> --update-version-management-file' to update the package version in the central package version management file '<path>\packages.props'.

//Removing a package reference in a project
ProjectA> dotnet remove package netwonsoft.json
Successfully removed package 'Newtonsoft.Json' from ProjectA. 

//Removing a package reference and the version info from packages.props
ProjectA> dotnet remove package netwonsoft.json --update-version-management-file
Successfully removed package 'Newtonsoft.Json' from ProjectA. 
Successfully removed package version information from the central package version management file '<path>\packages.props'.

//Removing a package version info from packages.props when the package reference does not exist
ProjectA> dotnet remove package netwonsoft.json --update-version-management-file
Package 'Newtonsoft.Json' is not referenced in ProjectA. 
Successfully removed package version information from the central package version management file '<path>\packages.props'.

Global Package References

Some packages may be referenced by all projects in your tree. This includes packages that do versioning, extend your build, or do any other function that is needed repository-wide.

Packages.props

<?xml version="1.0" encoding="utf-8"?>
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <ItemGroup>
    <Package Include="Nerdbank.GitVersioning" Version="[2.1.16]" PrivateAssets="All" />

    <PackageReference Include="Nerdbank.GitVersioning" Condition=" '$(EnableGitVersioning)' != 'false' " />
  </ItemGroup>
</Project>

Nerdbank.GitVersioning will be a package reference for all projects. A property EnableGitVersioning has been added for individual projects to disable the reference if necessary.

Details: Locking package dependencies

• If a central package version management file (default packages.props file is present, NuGet will not just use this file for manage package versions, but it will also create a lock file - packages.lock.json in the same folder as the central package version management file. This file will have the full package closure - direct and transitive across the projects in a repo.
• If you restore in a project's context, NuGet will refer the packages.lock.json to get the package closure and restore those packages.
• If there is any of the following discrepancies while resolving package dependencies for a project, restore will error out.
  • PackageReference in project file does not have a corresponding entry in the packages.lock.json and/or packages.props
  • Version mismatch between packages.lock.json and packages.props
• In order to update the lock file with new restore graph, you can run restore with option update-lock-file:

  > dotnet restore --update-lock-file
  

• Specifying a <Package> node in the packages.props does not mean the lock file will also contain this package information. The lock file is updated on a package reference addition to a project.

Extensibility

Setting the following properties control how Traversal works.

Property	Description
CentralPackagesFile	The full path to the file containing your package versions. Defaults to Packages.props at the root of your repository.
``

Example

Use a custom file name for your project that defines package versions.

<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <PropertyGroup>
    <CentralPackagesFile>$(MSBuildThisFileDirectory)MyPackageVersions.props</CentralPackagesFile>
  </PropertyGroup>
</Project>

Making it work for existing projects

Existing projects will have versions in their project files. There are two approaches for these projects to make use of the CentralPackagesFile:

Enable users to update the PackageReferences

TBD.

Additionally generate the CentralPackagesFile to get started.

TBD.

>

MSBuild option to ignore the versions mentioned in PackageReference nodes

TBD.

VS experience

TBD.

FAQs

How to enable this feature?

To enable just put a packages.props file in the solution root or repo root directory that is evaluated by msbuild.exe during build. Additionally you can specify CentralPackagesFile property indicating where to look for this file. The same will enable the feature.

How do I have a given set of package versions for all the projects but a different set for a specific package?

To override the global packages' version constraints for a specific project, you can define packages.props file in the project root directory. This will override the global settings from the global/repo-level packages.props file.

You can also specify CentralPackagesFile property indicating where to look for this file for a given project in the project file or in the directory.build.props file that gets evaluated for a given project.

What happens when there are multiple packages.props file available in a project's context?

In order to remove any confusion, the packages.props or the CentralPackagesFile specification nearest to the project will override all others. At a time only one packages.props file is evaluated for a given project.

E.g. in the below scenario

Repo
 |-- packages.props
 |-- foobar.packages.props
 |-- Solution1
     |-- packages.props
     |-- Project1
     |-- Project2
         |-- packages.props
     |-- Project3
         |-- directory.build.props   // specifies CentralPackagesFile = path to foobar.packages.props
 |-- Solution2
     |-- Project4

In the above scenario:

• Project1 will refer to only Repo\Solution1\packages.props
• Project2 will refer to only Repo\Solution1\Project2\packages.props
• Project3 will refer to only Repo\foobar.packages.props
• Project4 will refer to only Repo\packages.props