Fix unit test floating point exceptions so we can enable Floating point exceptions by default in Debug mode (GCC/Clang) #10648

jmarrec · 2024-08-08T09:30:48Z

Issue overview

29 tests have floating point violations currently, cf #10578 (comment)

Left-out

EnergyPlusFixture.DXCoils_Test2
EnergyPlusFixture.TestMultiSpeedCoilsAutoSizingOutput
EnergyPlusFixture.UnitarySystemModel_MultispeedDXCoilSizing
EnergyPlusFixture.UnitarySystemModel_MultispeedDXHeatingCoilOnly
EnergyPlusFixture.UnitarySystemModel_MultispeedDXCoilHeatRecoveryHandling

Details

Some additional details for this issue (if relevant):

Platform (Operating system, version): all really, but mostly macOS/GCC
Version of EnergyPlus (if using an intermediate build, include SHA): develop, eb6665f

Checklist

Add to this list or remove from it as applicable. This is a simple templated set of guidelines.

Defect file added (list location of defect file here)
Ticket added to EnergyPlus Defect Complexity (Github Project)
Pull request created (the pull request will have additional tasks related to reviewing changes that fix this defect)

The text was updated successfully, but these errors were encountered:

jmarrec · 2024-08-09T14:44:35Z

EnergyPlusFixture.DXCoils_Test2

[ RUN      ] EnergyPlusFixture.DXCoils_Test2
Process 1051709 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: invalid floating point operation
    frame #0: 0x000055555e447f8b energyplus_tests`EnergyPlus::HeatingCapacitySizer::size(this=0x00007fffffffb410, state=0x000055556e2946d0, _originalValue=-99999, errorsFound=0x00007fffffff9699) at HeatingCapacitySizing.cc:399:42
   396 	                                                 HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT]));
   397 	                    }
   398 	
-> 399 	                    DXFlowPerCapMinRatio = (DesVolFlow / HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT]) /
    	                                         ^
   400 	                                           this->autoSizedValue; // set DX Coil Capacity Increase Ratio from Too Low Flow/Capacity Ratio
   401 	                    this->autoSizedValue = DesVolFlow / HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT];
   402
Process 1051709 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: invalid floating point operation
  * frame #0: 0x000055555e447f8b energyplus_tests`EnergyPlus::HeatingCapacitySizer::size(this=0x00007fffffffb410, state=0x000055556e2946d0, _originalValue=-99999, errorsFound=0x00007fffffff9699) at HeatingCapacitySizing.cc:399:42
    frame #1: 0x000055555e898136 energyplus_tests`EnergyPlus::DXCoils::SizeDXCoil(state=0x000055556e2946d0, DXCoilNum=2) at DXCoils.cc:7624:73
    frame #2: 0x000055555b6b7745 energyplus_tests`EnergyPlus::EnergyPlusFixture_DXCoils_Test2_Test::TestBody(this=0x000055556e293fe0) at DXCoils.unit.cc:383:15
    frame #3: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e293fe0, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #4: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e293fe0) at gtest.cc:2682:50
    frame #5: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e17c810) at gtest.cc:2861:14
    frame #6: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #7: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #8: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #9: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #10: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #11: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc118) at main.cc:71:25
    frame #12: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc118, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc108) at libc-start.c:308:16
    frame #13: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.MultiSpeedDXCoolingCoilOutputTest

[ RUN      ] EnergyPlusFixture.MultiSpeedDXCoolingCoilOutputTest
Process 1051752 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
    frame #0: 0x000055555e8dd24f energyplus_tests`EnergyPlus::DXCoils::CalcTotCapSHR(state=0x000055556e294840, InletDryBulb=30, InletHumRat=0.0074999999999999997, InletEnthalpy=49320.513749999998, InletWetBulb=17.628175857112453, AirMassFlowRatio=1, AirMassFlow=0.59999999999999998, TotCapNom=10710, CBF=1, CCapFTemp=1, CCapFFlow=2, TotCap=0x00007fffffffa820, SHR=0x00007fffffffa828, CondInletTemp=30, Pressure=101325, TotCapModFac=0x000055556f9ecd80) at DXCoils.cc:12469:39
   12466	
   12467	        //   Calculate apparatus dew point conditions using TotCap and CBF
   12468	        hDelta = TotCapCalc / AirMassFlow;
-> 12469	        hADP = InletEnthalpy - hDelta / (1.0 - CBF);
    	                                      ^
   12470	        tADP = PsyTsatFnHPb(state, hADP, Pressure);
   12471	        wADP = PsyWFnTdbH(state, tADP, hADP);
   12472	        hTinwADP = PsyHFnTdbW(InletDryBulb, wADP);
Process 1051752 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
  * frame #0: 0x000055555e8dd24f energyplus_tests`EnergyPlus::DXCoils::CalcTotCapSHR(state=0x000055556e294840, InletDryBulb=30, InletHumRat=0.0074999999999999997, InletEnthalpy=49320.513749999998, InletWetBulb=17.628175857112453, AirMassFlowRatio=1, AirMassFlow=0.59999999999999998, TotCapNom=10710, CBF=1, CCapFTemp=1, CCapFFlow=2, TotCap=0x00007fffffffa820, SHR=0x00007fffffffa828, CondInletTemp=30, Pressure=101325, TotCapModFac=0x000055556f9ecd80) at DXCoils.cc:12469:39
    frame #1: 0x000055555e8e0fda energyplus_tests`EnergyPlus::DXCoils::CalcMultiSpeedDXCoilCooling(state=0x000055556e294840, DXCoilNum=1, SpeedRatio=0, CycRatio=1, SpeedNum=2, fanOp=Cycling, compressorOp=On, SingleMode=0) at DXCoils.cc:12814:26
    frame #2: 0x000055555b74aa9a energyplus_tests`EnergyPlus::EnergyPlusFixture_MultiSpeedDXCoolingCoilOutputTest_Test::TestBody(this=0x000055556e293f60) at DXCoils.unit.cc:5357:32
    frame #3: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e293f60, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #4: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e293f60) at gtest.cc:2682:50
    frame #5: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e17fa10) at gtest.cc:2861:14
    frame #6: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #7: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #8: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #9: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #10: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #11: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc108) at main.cc:71:25
    frame #12: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc108, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0f8) at libc-start.c:308:16
    frame #13: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.SingleSpeedDXCoolingCoilOutputTest

[ RUN      ] EnergyPlusFixture.SingleSpeedDXCoolingCoilOutputTest
Process 1051824 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
    frame #0: 0x000055555e8b7db9 energyplus_tests`EnergyPlus::DXCoils::CalcDoe2DXCoil(state=0x000055556e294840, DXCoilNum=1, compressorOp=On, FirstHVACIteration=true, PartLoadRatio=1, fanOp=Continuous, PerfMode=ObjexxFCL::Optional_int_const @ 0x00007fffffffbb70, OnOffAirFlowRatio=Optional<double const> @ 0x00007fffffffbb80, CoolingHeatingPLR=Optional<double const> @ 0x00007fffffffbb90) at DXCoils.cc:9610:50
   9607	            } else {
   9608	                // Calculate apparatus dew point conditions using TotCap and CBF
   9609	                hDelta = TotCap / AirMassFlow;
-> 9610	                hADP = InletAirEnthalpy - hDelta / (1.0 - CBF);
    	                                                 ^
   9611	                tADP = PsyTsatFnHPb(state, hADP, OutdoorPressure, calcDoe2DXCoil);
   9612	                //  Eventually inlet air conditions will be used in DX Coil, these lines are commented out and marked with this comment line
   9613	                //  tADP = PsyTsatFnHPb(hADP,InletAirPressure)
Process 1051824 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
  * frame #0: 0x000055555e8b7db9 energyplus_tests`EnergyPlus::DXCoils::CalcDoe2DXCoil(state=0x000055556e294840, DXCoilNum=1, compressorOp=On, FirstHVACIteration=true, PartLoadRatio=1, fanOp=Continuous, PerfMode=ObjexxFCL::Optional_int_const @ 0x00007fffffffbb70, OnOffAirFlowRatio=Optional<double const> @ 0x00007fffffffbb80, CoolingHeatingPLR=Optional<double const> @ 0x00007fffffffbb90) at DXCoils.cc:9610:50
    frame #1: 0x000055555b746593 energyplus_tests`EnergyPlus::EnergyPlusFixture_SingleSpeedDXCoolingCoilOutputTest_Test::TestBody(this=0x000055556e293f60) at DXCoils.unit.cc:5171:19
    frame #2: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e293f60, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #3: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e293f60) at gtest.cc:2682:50
    frame #4: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e17f7e0) at gtest.cc:2861:14
    frame #5: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #6: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #7: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #8: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #9: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #10: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc108) at main.cc:71:25
    frame #11: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc108, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0f8) at libc-start.c:308:16
    frame #12: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.SolarShadingTest_PolygonClippingDirect

[ RUN      ] EnergyPlusFixture.SolarShadingTest_PolygonClippingDirect
Process 1051908 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: invalid floating point operation
    frame #0: 0x0000555560689d47 energyplus_tests`EnergyPlus::SolarShading::CLIPLINE(x1=0x00007fffffff7e98, x2=0x00007fffffff7ea8, y1=0x00007fffffff7ea0, y2=0x00007fffffff7eb0, maxX=800000, minX=200000, maxY=250000, minY=50000, visible=0x00007fffffff7e47, rev=0x00007fffffff7e48) at SolarShading.cc:3996:35
   3993	                    if (x2 <= maxX && y2 >= minY) return;
   3994	                } else if (c2 == 4) {
   3995	                    x2 = maxX;
-> 3996	                    y2 = minY + e / dx;
    	                                  ^
   3997	                    return;
   3998	                }
   3999	                if (needX) {
Process 1051908 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: invalid floating point operation
  * frame #0: 0x0000555560689d47 energyplus_tests`EnergyPlus::SolarShading::CLIPLINE(x1=0x00007fffffff7e98, x2=0x00007fffffff7ea8, y1=0x00007fffffff7ea0, y2=0x00007fffffff7eb0, maxX=800000, minX=200000, maxY=250000, minY=50000, visible=0x00007fffffff7e47, rev=0x00007fffffff7e48) at SolarShading.cc:3996:35
    frame #1: 0x000055556068a656 energyplus_tests`EnergyPlus::SolarShading::CLIPRECT(state=0x000055556e294810, NS2=3, NV1=4, NV3=0x00007fffffff8854) at SolarShading.cc:4067:17
    frame #2: 0x000055556068d285 energyplus_tests`EnergyPlus::SolarShading::CLIPPOLY(state=0x000055556e294810, NS1=2, NS2=3, NV1=4, NV2=4, NV3=0x00007fffffff8854) at SolarShading.cc:4337:21
    frame #3: 0x00005555606912f7 energyplus_tests`EnergyPlus::SolarShading::DeterminePolygonOverlap(state=0x000055556e294810, NS1=2, NS2=3, NS3=4) at SolarShading.cc:4762:17
    frame #4: 0x000055556068f6af energyplus_tests`EnergyPlus::SolarShading::MULTOL(state=0x000055556e294810, NNN=3, LOC0=1, NRFIGS=1) at SolarShading.cc:4533:32
    frame #5: 0x00005555606d1e4b energyplus_tests`EnergyPlus::SolarShading::SHDSBS(state=0x000055556e294810, iHour=24, CurSurf=5, NBKS=0, NSBS=1, HTS=5, TS=0) at SolarShading.cc:9413:31
    frame #6: 0x00005555606a0858 energyplus_tests`EnergyPlus::SolarShading::SHADOW(state=0x000055556e294810, iHour=24, TS=0) at SolarShading.cc:5791:19
    frame #7: 0x00005555606ded38 energyplus_tests`EnergyPlus::SolarShading::SkyDifSolarShading(state=0x000055556e294810) at SolarShading.cc:10619:19
    frame #8: 0x000055555d56ce5e energyplus_tests`EnergyPlusFixture_SolarShadingTest_PolygonClippingDirect_Test::TestBody(this=0x000055556e294050) at SolarShading.unit.cc:1880:37
    frame #9: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e294050, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #10: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e294050) at gtest.cc:2682:50
    frame #11: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e234880) at gtest.cc:2861:14
    frame #12: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #13: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #14: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #15: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #16: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #17: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc108) at main.cc:71:25
    frame #18: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc108, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0f8) at libc-start.c:308:16
    frame #19: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.TestMultiSpeedCoilsAutoSizingOutput

[ RUN      ] EnergyPlusFixture.TestMultiSpeedCoilsAutoSizingOutput
Process 1052060 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
    frame #0: 0x000055555e447f8b energyplus_tests`EnergyPlus::HeatingCapacitySizer::size(this=0x00007fffffff86f0, state=0x000055556e294840, _originalValue=-99999, errorsFound=0x00007fffffff6979) at HeatingCapacitySizing.cc:399:42
   396 	                                                 HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT]));
   397 	                    }
   398 	
-> 399 	                    DXFlowPerCapMinRatio = (DesVolFlow / HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT]) /
    	                                         ^
   400 	                                           this->autoSizedValue; // set DX Coil Capacity Increase Ratio from Too Low Flow/Capacity Ratio
   401 	                    this->autoSizedValue = DesVolFlow / HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT];
   402
Process 1052060 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
  * frame #0: 0x000055555e447f8b energyplus_tests`EnergyPlus::HeatingCapacitySizer::size(this=0x00007fffffff86f0, state=0x000055556e294840, _originalValue=-99999, errorsFound=0x00007fffffff6979) at HeatingCapacitySizing.cc:399:42
    frame #1: 0x000055555e898136 energyplus_tests`EnergyPlus::DXCoils::SizeDXCoil(state=0x000055556e294840, DXCoilNum=2) at DXCoils.cc:7624:73
    frame #2: 0x000055555b733fa0 energyplus_tests`EnergyPlus::EnergyPlusFixture_TestMultiSpeedCoilsAutoSizingOutput_Test::TestBody(this=0x000055556e293f60) at DXCoils.unit.cc:4664:15
    frame #3: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e293f60, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #4: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e293f60) at gtest.cc:2682:50
    frame #5: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e17ef10) at gtest.cc:2861:14
    frame #6: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #7: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #8: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #9: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #10: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #11: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc108) at main.cc:71:25
    frame #12: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc108, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0f8) at libc-start.c:308:16
    frame #13: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.TestReadingCoilCoolingHeatingDX

[ RUN      ] EnergyPlusFixture.TestReadingCoilCoolingHeatingDX
Process 1052166 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
    frame #0: 0x0000555560c3d416 energyplus_tests`EnergyPlus::VariableSpeedCoils::CalcVarSpeedCoilCooling(state=0x000055556e294820, DXCoilNum=1, fanOp=Continuous, SensDemand=100, LatentDemand=100, compressorOp=On, PartLoadRatio=0, OnOffAirFlowRatio=0.5, SpeedRatio=0, SpeedNum=1) at VariableSpeedCoils.cc:6073:34
   6070	            }
   6071	
   6072	            if ((SpeedNum == 1) || (SpeedNum > MaxSpeed) || (SpeedRatio == 1.0)) {
-> 6073	                AirMassFlowRatio =
    	                                 ^
   6074	                    state.dataVariableSpeedCoils->LoadSideMassFlowRate / state.dataVariableSpeedCoils->VarSpeedCoil(DXCoilNum).DesignAirMassFlowRate;
   6075	
   6076	                if (state.dataVariableSpeedCoils->VarSpeedCoil(DXCoilNum).VSCoilType == HVAC::Coil_CoolingAirToAirVariableSpeed) {
Process 1052166 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
  * frame #0: 0x0000555560c3d416 energyplus_tests`EnergyPlus::VariableSpeedCoils::CalcVarSpeedCoilCooling(state=0x000055556e294820, DXCoilNum=1, fanOp=Continuous, SensDemand=100, LatentDemand=100, compressorOp=On, PartLoadRatio=0, OnOffAirFlowRatio=0.5, SpeedRatio=0, SpeedNum=1) at VariableSpeedCoils.cc:6073:34
    frame #1: 0x000055555b6dacb9 energyplus_tests`EnergyPlus::EnergyPlusFixture_TestReadingCoilCoolingHeatingDX_Test::TestBody(this=0x000055556e293f50) at DXCoils.unit.cc:2031:48
    frame #2: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e293f50, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #3: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e293f50) at gtest.cc:2682:50
    frame #4: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e17d2a0) at gtest.cc:2861:14
    frame #5: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #6: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #7: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #8: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #9: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #10: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc108) at main.cc:71:25
    frame #11: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc108, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0f8) at libc-start.c:308:16
    frame #12: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.TwoSpeedDXCoilStandardRatingsTest

[ RUN      ] EnergyPlusFixture.TwoSpeedDXCoilStandardRatingsTest
Process 1052213 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
    frame #0: 0x000055555e8dd24f energyplus_tests`EnergyPlus::DXCoils::CalcTotCapSHR(state=0x000055556e294840, InletDryBulb=26.699999999999999, InletHumRat=0.011112859304158127, InletEnthalpy=55173.39761789373, InletWetBulb=19.413927296919592, AirMassFlowRatio=1, AirMassFlow=1, TotCapNom=17580, CBF=1, CCapFTemp=1, CCapFFlow=5, TotCap=0x00007fffffff9ec0, SHR=0x00007fffffff9ec8, CondInletTemp=35, Pressure=101325, TotCapModFac=0x000055556e9b8040) at DXCoils.cc:12469:39
   12466	
   12467	        //   Calculate apparatus dew point conditions using TotCap and CBF
   12468	        hDelta = TotCapCalc / AirMassFlow;
-> 12469	        hADP = InletEnthalpy - hDelta / (1.0 - CBF);
    	                                      ^
   12470	        tADP = PsyTsatFnHPb(state, hADP, Pressure);
   12471	        wADP = PsyWFnTdbH(state, tADP, hADP);
   12472	        hTinwADP = PsyHFnTdbW(InletDryBulb, wADP);
Process 1052213 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
  * frame #0: 0x000055555e8dd24f energyplus_tests`EnergyPlus::DXCoils::CalcTotCapSHR(state=0x000055556e294840, InletDryBulb=26.699999999999999, InletHumRat=0.011112859304158127, InletEnthalpy=55173.39761789373, InletWetBulb=19.413927296919592, AirMassFlowRatio=1, AirMassFlow=1, TotCapNom=17580, CBF=1, CCapFTemp=1, CCapFFlow=5, TotCap=0x00007fffffff9ec0, SHR=0x00007fffffff9ec8, CondInletTemp=35, Pressure=101325, TotCapModFac=0x000055556e9b8040) at DXCoils.cc:12469:39
    frame #1: 0x000055555e8d3140 energyplus_tests`EnergyPlus::DXCoils::CalcMultiSpeedDXCoil(state=0x000055556e294840, DXCoilNum=1, SpeedRatio=1, CycRatio=1, ForceOn=ObjexxFCL::Optional_bool_const @ 0x00007fffffffafe0) at DXCoils.cc:11451:26
    frame #2: 0x000055555e8f7fb3 energyplus_tests`EnergyPlus::DXCoils::CalcTwoSpeedDXCoilStandardRating(state=0x000055556e294840, DXCoilNum=1) at DXCoils.cc:14500:25
    frame #3: 0x000055555b75244c energyplus_tests`EnergyPlus::EnergyPlusFixture_TwoSpeedDXCoilStandardRatingsTest_Test::TestBody(this=0x000055556e293f60) at DXCoils.unit.cc:5574:37
    frame #4: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e293f60, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #5: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e293f60) at gtest.cc:2682:50
    frame #6: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e17fc40) at gtest.cc:2861:14
    frame #7: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #8: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #9: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #10: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #11: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #12: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc108) at main.cc:71:25
    frame #13: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc108, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0f8) at libc-start.c:308:16
    frame #14: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.TwoSpeedDXCoilStandardRatings_Curve_Fix_Test

[ RUN      ] EnergyPlusFixture.TwoSpeedDXCoilStandardRatings_Curve_Fix_Test
Process 1052325 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
    frame #0: 0x000055555e8dd24f energyplus_tests`EnergyPlus::DXCoils::CalcTotCapSHR(state=0x000055556e294830, InletDryBulb=26.699999999999999, InletHumRat=0.011112859304158127, InletEnthalpy=55173.39761789373, InletWetBulb=19.413927296919592, AirMassFlowRatio=1, AirMassFlow=1, TotCapNom=17580, CBF=1, CCapFTemp=1, CCapFFlow=5, TotCap=0x00007fffffff9150, SHR=0x00007fffffff9158, CondInletTemp=35, Pressure=101325, TotCapModFac=0x000055556ea02940) at DXCoils.cc:12469:39
   12466	
   12467	        //   Calculate apparatus dew point conditions using TotCap and CBF
   12468	        hDelta = TotCapCalc / AirMassFlow;
-> 12469	        hADP = InletEnthalpy - hDelta / (1.0 - CBF);
    	                                      ^
   12470	        tADP = PsyTsatFnHPb(state, hADP, Pressure);
   12471	        wADP = PsyWFnTdbH(state, tADP, hADP);
   12472	        hTinwADP = PsyHFnTdbW(InletDryBulb, wADP);
Process 1052325 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
  * frame #0: 0x000055555e8dd24f energyplus_tests`EnergyPlus::DXCoils::CalcTotCapSHR(state=0x000055556e294830, InletDryBulb=26.699999999999999, InletHumRat=0.011112859304158127, InletEnthalpy=55173.39761789373, InletWetBulb=19.413927296919592, AirMassFlowRatio=1, AirMassFlow=1, TotCapNom=17580, CBF=1, CCapFTemp=1, CCapFFlow=5, TotCap=0x00007fffffff9150, SHR=0x00007fffffff9158, CondInletTemp=35, Pressure=101325, TotCapModFac=0x000055556ea02940) at DXCoils.cc:12469:39
    frame #1: 0x000055555e8d3140 energyplus_tests`EnergyPlus::DXCoils::CalcMultiSpeedDXCoil(state=0x000055556e294830, DXCoilNum=1, SpeedRatio=1, CycRatio=1, ForceOn=ObjexxFCL::Optional_bool_const @ 0x00007fffffffa270) at DXCoils.cc:11451:26
    frame #2: 0x000055555e8f7fb3 energyplus_tests`EnergyPlus::DXCoils::CalcTwoSpeedDXCoilStandardRating(state=0x000055556e294830, DXCoilNum=1) at DXCoils.cc:14500:25
    frame #3: 0x000055555b759402 energyplus_tests`EnergyPlus::EnergyPlusFixture_TwoSpeedDXCoilStandardRatings_Curve_Fix_Test_Test::TestBody(this=0x000055556e294070) at DXCoils.unit.cc:5818:37
    frame #4: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e294070, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #5: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e294070) at gtest.cc:2682:50
    frame #6: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e17fe70) at gtest.cc:2861:14
    frame #7: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #8: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #9: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #10: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #11: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #12: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc0f8) at main.cc:71:25
    frame #13: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc0f8, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0e8) at libc-start.c:308:16
    frame #14: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.UnitarySystemModel_MultispeedDXCoilHeatRecoveryHandling

[ RUN      ] EnergyPlusFixture.UnitarySystemModel_MultispeedDXCoilHeatRecoveryHandling
Process 1052371 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: invalid floating point operation
    frame #0: 0x000055555e8ddf81 energyplus_tests`EnergyPlus::DXCoils::CalcMultiSpeedDXCoilCooling(state=0x000055556e294870, DXCoilNum=1, SpeedRatio=0, CycRatio=0, SpeedNum=0, fanOp=Continuous, compressorOp=Off, SingleMode=0) at DXCoils.cc:12670:24
   12667	
   12668	    MSHPWasteHeat = 0.0;
   12669	    AirMassFlow = thisDXCoil.InletAirMassFlowRate;
-> 12670	    AirMassFlowRatioLS = MSHPMassFlowRateLow / thisDXCoil.MSRatedAirMassFlowRate(SpeedNumLS);
    	                       ^
   12671	    AirMassFlowRatioHS = MSHPMassFlowRateHigh / thisDXCoil.MSRatedAirMassFlowRate(SpeedNumHS);
   12672	    if ((AirMassFlow > 0.0) && (CycRatio > 0.0) && (MSHPMassFlowRateHigh == 0.0)) {
   12673	        ShowSevereError(
Process 1052371 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: invalid floating point operation
  * frame #0: 0x000055555e8ddf81 energyplus_tests`EnergyPlus::DXCoils::CalcMultiSpeedDXCoilCooling(state=0x000055556e294870, DXCoilNum=1, SpeedRatio=0, CycRatio=0, SpeedNum=0, fanOp=Continuous, compressorOp=Off, SingleMode=0) at DXCoils.cc:12670:24
    frame #1: 0x000055555e818153 energyplus_tests`EnergyPlus::DXCoils::SimDXCoilMultiSpeed(state=0x000055556e294870, CompName=(_M_len = 21, _M_str = "MULTISPD COOLING COIL"), SpeedRatio=0, CycRatio=0, CompIndex=0x00007fffffffa248, SpeedNum=ObjexxFCL::Optional_int_const @ 0x00007fffffffa450, fanOp=Optional<const EnergyPlus::HVAC::FanOp> @ 0x00007fffffffa460, compressorOp=Off, SingleMode=ObjexxFCL::Optional_int_const @ 0x00007fffffffa470) at DXCoils.cc:336:40
    frame #2: 0x0000555560b1b006 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::calcUnitaryCoolingSystem(this=0x000055556e9f8b60, state=0x000055556e294870, AirLoopNum=0, FirstHVACIteration=true, PartLoadRatio=0, CompressorOn=Off, OnOffAirFlowRatio=0, CoilCoolHeatRat=1, HXUnitOn=false) at UnitarySystem.cc:11625:45
    frame #3: 0x0000555560b16805 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::calcUnitarySystemToLoad(this=0x000055556e9f8b60, state=0x000055556e294870, AirLoopNum=0, FirstHVACIteration=true, CoolPLR=0, HeatPLR=0, OnOffAirFlowRatio=0x00007fffffffb228, SensOutput=0x00007fffffffa938, LatOutput=0x00007fffffffa940, HXUnitOn=false, HeatCoilLoad=0, SuppCoilLoad=0, CompressorOn=Off) at UnitarySystem.cc:11188:47
    frame #4: 0x0000555560b0db61 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::initLoadBasedControl(this=0x000055556e9f8b60, state=0x000055556e294870, AirLoopNum=0, FirstHVACIteration=true, OnOffAirFlowRatio=0x00007fffffffb228, ZoneLoad=0x00007fffffffb220) at UnitarySystem.cc:10239:42
    frame #5: 0x0000555560afaffc energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::updateUnitarySystemControl(this=0x000055556e9f8b60, state=0x000055556e294870, AirLoopNum=0, OutNode=6, ControlNode=0, OnOffAirFlowRatio=0x00007fffffffb228, FirstHVACIteration=true, OAUCoilOutletTemp=0, ZoneLoad=0x00007fffffffb220, MaxOutletTemp=80) at UnitarySystem.cc:8113:43
    frame #6: 0x0000555560af76f9 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::controlUnitarySystemtoLoad(this=0x000055556e9f8b60, state=0x000055556e294870, AirLoopNum=0, FirstHVACIteration=true, CompressorOn=0x00007fffffffb3ec, OAUCoilOutTemp=0, HXUnitOn=false, sysOutputProvided=0x00007fffffffb530, latOutputProvided=0x00007fffffffb538) at UnitarySystem.cc:7689:41
    frame #7: 0x0000555560a7d06b energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::simulate(this=0x000055556e9f8b60, state=0x000055556e294870, Name=(_M_len = 20, _M_str = "UNITARY SYSTEM MODEL"), FirstHVACIteration=true, AirLoopNum=0, CompIndex=0x000055556e483ec0, HeatActive=0x00007fffffffb730, CoolActive=0x00007fffffffb760, ZoneOAUnitNum=0, OAUCoilOutTemp=0, ZoneEquipment=true, sysOutputProvided=0x00007fffffffb530, latOutputProvided=0x00007fffffffb538) at UnitarySystem.cc:155:45
    frame #8: 0x00005555610d6d7e energyplus_tests`EnergyPlus::ZoneEquipmentManager::SimZoneEquipment(state=0x000055556e294870, FirstHVACIteration=true, SimAir=0x00007fffffffb843) at ZoneEquipmentManager.cc:3292:62
    frame #9: 0x00005555610b20e2 energyplus_tests`EnergyPlus::ZoneEquipmentManager::ManageZoneEquipment(state=0x000055556e294870, FirstHVACIteration=true, SimZone=0x00007fffffffb844, SimAir=0x00007fffffffb843) at ZoneEquipmentManager.cc:160:25
    frame #10: 0x00005555605c17bb energyplus_tests`EnergyPlus::SizingManager::ManageSizing(state=0x000055556e294870) at SizingManager.cc:577:28
    frame #11: 0x000055555dce4e46 energyplus_tests`EnergyPlusFixture_UnitarySystemModel_MultispeedDXCoilHeatRecoveryHandling_Test::TestBody(this=0x000055556e2940b0) at UnitarySystem.unit.cc:13109:32
    frame #12: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e2940b0, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #13: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e2940b0) at gtest.cc:2682:50
    frame #14: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e258460) at gtest.cc:2861:14
    frame #15: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #16: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #17: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #18: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #19: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #20: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc0f8) at main.cc:71:25
    frame #21: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc0f8, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0e8) at libc-start.c:308:16
    frame #22: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.UnitarySystemModel_MultispeedDXCoilSizing

[ RUN      ] EnergyPlusFixture.UnitarySystemModel_MultispeedDXCoilSizing
Process 1052416 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: invalid floating point operation
    frame #0: 0x000055555e8ddf81 energyplus_tests`EnergyPlus::DXCoils::CalcMultiSpeedDXCoilCooling(state=0x000055556e294830, DXCoilNum=1, SpeedRatio=0, CycRatio=0, SpeedNum=0, fanOp=Continuous, compressorOp=Off, SingleMode=0) at DXCoils.cc:12670:24
   12667	
   12668	    MSHPWasteHeat = 0.0;
   12669	    AirMassFlow = thisDXCoil.InletAirMassFlowRate;
-> 12670	    AirMassFlowRatioLS = MSHPMassFlowRateLow / thisDXCoil.MSRatedAirMassFlowRate(SpeedNumLS);
    	                       ^
   12671	    AirMassFlowRatioHS = MSHPMassFlowRateHigh / thisDXCoil.MSRatedAirMassFlowRate(SpeedNumHS);
   12672	    if ((AirMassFlow > 0.0) && (CycRatio > 0.0) && (MSHPMassFlowRateHigh == 0.0)) {
   12673	        ShowSevereError(
Process 1052416 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: invalid floating point operation
  * frame #0: 0x000055555e8ddf81 energyplus_tests`EnergyPlus::DXCoils::CalcMultiSpeedDXCoilCooling(state=0x000055556e294830, DXCoilNum=1, SpeedRatio=0, CycRatio=0, SpeedNum=0, fanOp=Continuous, compressorOp=Off, SingleMode=0) at DXCoils.cc:12670:24
    frame #1: 0x000055555e818153 energyplus_tests`EnergyPlus::DXCoils::SimDXCoilMultiSpeed(state=0x000055556e294830, CompName=(_M_len = 21, _M_str = "MULTISPD COOLING COIL"), SpeedRatio=0, CycRatio=0, CompIndex=0x00007fffffff9ff8, SpeedNum=ObjexxFCL::Optional_int_const @ 0x00007fffffffa200, fanOp=Optional<const EnergyPlus::HVAC::FanOp> @ 0x00007fffffffa210, compressorOp=Off, SingleMode=ObjexxFCL::Optional_int_const @ 0x00007fffffffa220) at DXCoils.cc:336:40
    frame #2: 0x0000555560b1b006 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::calcUnitaryCoolingSystem(this=0x000055556e9d4ad0, state=0x000055556e294830, AirLoopNum=0, FirstHVACIteration=true, PartLoadRatio=0, CompressorOn=Off, OnOffAirFlowRatio=0, CoilCoolHeatRat=1, HXUnitOn=false) at UnitarySystem.cc:11625:45
    frame #3: 0x0000555560b16805 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::calcUnitarySystemToLoad(this=0x000055556e9d4ad0, state=0x000055556e294830, AirLoopNum=0, FirstHVACIteration=true, CoolPLR=0, HeatPLR=0, OnOffAirFlowRatio=0x00007fffffffafd8, SensOutput=0x00007fffffffa6e8, LatOutput=0x00007fffffffa6f0, HXUnitOn=false, HeatCoilLoad=0, SuppCoilLoad=0, CompressorOn=Off) at UnitarySystem.cc:11188:47
    frame #4: 0x0000555560b0db61 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::initLoadBasedControl(this=0x000055556e9d4ad0, state=0x000055556e294830, AirLoopNum=0, FirstHVACIteration=true, OnOffAirFlowRatio=0x00007fffffffafd8, ZoneLoad=0x00007fffffffafd0) at UnitarySystem.cc:10239:42
    frame #5: 0x0000555560afaffc energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::updateUnitarySystemControl(this=0x000055556e9d4ad0, state=0x000055556e294830, AirLoopNum=0, OutNode=6, ControlNode=0, OnOffAirFlowRatio=0x00007fffffffafd8, FirstHVACIteration=true, OAUCoilOutletTemp=0, ZoneLoad=0x00007fffffffafd0, MaxOutletTemp=80) at UnitarySystem.cc:8113:43
    frame #6: 0x0000555560af76f9 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::controlUnitarySystemtoLoad(this=0x000055556e9d4ad0, state=0x000055556e294830, AirLoopNum=0, FirstHVACIteration=true, CompressorOn=0x00007fffffffb19c, OAUCoilOutTemp=0, HXUnitOn=false, sysOutputProvided=0x00007fffffffb2e0, latOutputProvided=0x00007fffffffb2e8) at UnitarySystem.cc:7689:41
    frame #7: 0x0000555560a7d06b energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::simulate(this=0x000055556e9d4ad0, state=0x000055556e294830, Name=(_M_len = 20, _M_str = "UNITARY SYSTEM MODEL"), FirstHVACIteration=true, AirLoopNum=0, CompIndex=0x000055556f65dcc0, HeatActive=0x00007fffffffb4e0, CoolActive=0x00007fffffffb510, ZoneOAUnitNum=0, OAUCoilOutTemp=0, ZoneEquipment=true, sysOutputProvided=0x00007fffffffb2e0, latOutputProvided=0x00007fffffffb2e8) at UnitarySystem.cc:155:45
    frame #8: 0x00005555610d6d7e energyplus_tests`EnergyPlus::ZoneEquipmentManager::SimZoneEquipment(state=0x000055556e294830, FirstHVACIteration=true, SimAir=0x00007fffffffb5f3) at ZoneEquipmentManager.cc:3292:62
    frame #9: 0x00005555610b20e2 energyplus_tests`EnergyPlus::ZoneEquipmentManager::ManageZoneEquipment(state=0x000055556e294830, FirstHVACIteration=true, SimZone=0x00007fffffffb5f4, SimAir=0x00007fffffffb5f3) at ZoneEquipmentManager.cc:160:25
    frame #10: 0x00005555605c17bb energyplus_tests`EnergyPlus::SizingManager::ManageSizing(state=0x000055556e294830) at SizingManager.cc:577:28
    frame #11: 0x000055555dca2bc8 energyplus_tests`EnergyPlusFixture_UnitarySystemModel_MultispeedDXCoilSizing_Test::TestBody(this=0x000055556e294070) at UnitarySystem.unit.cc:9231:32
    frame #12: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e294070, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #13: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e294070) at gtest.cc:2682:50
    frame #14: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e257920) at gtest.cc:2861:14
    frame #15: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #16: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #17: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #18: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #19: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #20: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc108) at main.cc:71:25
    frame #21: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc108, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0f8) at libc-start.c:308:16
    frame #22: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.UnitarySystemModel_MultispeedDXHeatingCoilOnly

[ RUN      ] EnergyPlusFixture.UnitarySystemModel_MultispeedDXHeatingCoilOnly
Process 1052566 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: invalid floating point operation
    frame #0: 0x000055555e8e7f51 energyplus_tests`EnergyPlus::DXCoils::CalcMultiSpeedDXCoilHeating(state=0x000055556e294830, DXCoilNum=1, SpeedRatio=0, CycRatio=0, SpeedNum=0, fanOp=Continuous, SingleMode=0) at DXCoils.cc:13481:24
   13478	    }
   13479	
   13480	    AirMassFlow = thisDXCoil.InletAirMassFlowRate;
-> 13481	    AirMassFlowRatioLS = MSHPMassFlowRateLow / thisDXCoil.MSRatedAirMassFlowRate(SpeedNumLS);
    	                       ^
   13482	    AirMassFlowRatioHS = MSHPMassFlowRateHigh / thisDXCoil.MSRatedAirMassFlowRate(SpeedNumHS);
   13483	    if ((AirMassFlow > 0.0) && (CycRatio > 0.0) && (MSHPMassFlowRateHigh == 0.0)) {
   13484	        ShowSevereError(
Process 1052566 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: invalid floating point operation
  * frame #0: 0x000055555e8e7f51 energyplus_tests`EnergyPlus::DXCoils::CalcMultiSpeedDXCoilHeating(state=0x000055556e294830, DXCoilNum=1, SpeedRatio=0, CycRatio=0, SpeedNum=0, fanOp=Continuous, SingleMode=0) at DXCoils.cc:13481:24
    frame #1: 0x000055555e818221 energyplus_tests`EnergyPlus::DXCoils::SimDXCoilMultiSpeed(state=0x000055556e294830, CompName=(_M_len = 17, _M_str = "MS HEATING COIL 1"), SpeedRatio=0, CycRatio=0, CompIndex=0x000055556e9e4cc0, SpeedNum=ObjexxFCL::Optional_int_const @ 0x00007fffffffa3c0, fanOp=Optional<const EnergyPlus::HVAC::FanOp> @ 0x00007fffffffa3d0, compressorOp=Off, SingleMode=ObjexxFCL::Optional_int_const @ 0x00007fffffffa3e0) at DXCoils.cc:348:40
    frame #2: 0x0000555560b1ca49 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::calcUnitaryHeatingSystem(this=0x000055556e9e46f0, state=0x000055556e294830, AirLoopNum=0, FirstHVACIteration=true, PartLoadRatio=0, CompressorOn=Off, OnOffAirFlowRatio=0, HeatCoilLoad=0) at UnitarySystem.cc:11796:45
    frame #3: 0x0000555560b173e2 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::calcUnitarySystemToLoad(this=0x000055556e9e46f0, state=0x000055556e294830, AirLoopNum=0, FirstHVACIteration=true, CoolPLR=0, HeatPLR=0, OnOffAirFlowRatio=0x00007fffffffb1b8, SensOutput=0x00007fffffffa8c8, LatOutput=0x00007fffffffa8d0, HXUnitOn=false, HeatCoilLoad=0, SuppCoilLoad=0, CompressorOn=Off) at UnitarySystem.cc:11240:47
    frame #4: 0x0000555560b0db61 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::initLoadBasedControl(this=0x000055556e9e46f0, state=0x000055556e294830, AirLoopNum=0, FirstHVACIteration=true, OnOffAirFlowRatio=0x00007fffffffb1b8, ZoneLoad=0x00007fffffffb1b0) at UnitarySystem.cc:10239:42
    frame #5: 0x0000555560afaffc energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::updateUnitarySystemControl(this=0x000055556e9e46f0, state=0x000055556e294830, AirLoopNum=0, OutNode=0, ControlNode=0, OnOffAirFlowRatio=0x00007fffffffb1b8, FirstHVACIteration=true, OAUCoilOutletTemp=0, ZoneLoad=0x00007fffffffb1b0, MaxOutletTemp=80) at UnitarySystem.cc:8113:43
    frame #6: 0x0000555560af76f9 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::controlUnitarySystemtoLoad(this=0x000055556e9e46f0, state=0x000055556e294830, AirLoopNum=0, FirstHVACIteration=true, CompressorOn=0x00007fffffffb37c, OAUCoilOutTemp=0, HXUnitOn=false, sysOutputProvided=0x00007fffffffb4c0, latOutputProvided=0x00007fffffffb4c8) at UnitarySystem.cc:7689:41
    frame #7: 0x0000555560a7d06b energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::simulate(this=0x000055556e9e46f0, state=0x000055556e294830, Name=(_M_len = 20, _M_str = "UNITARY SYSTEM MODEL"), FirstHVACIteration=true, AirLoopNum=0, CompIndex=0x000055556eafe900, HeatActive=0x00007fffffffb6c0, CoolActive=0x00007fffffffb6f0, ZoneOAUnitNum=0, OAUCoilOutTemp=0, ZoneEquipment=true, sysOutputProvided=0x00007fffffffb4c0, latOutputProvided=0x00007fffffffb4c8) at UnitarySystem.cc:155:45
    frame #8: 0x00005555610d6d7e energyplus_tests`EnergyPlus::ZoneEquipmentManager::SimZoneEquipment(state=0x000055556e294830, FirstHVACIteration=true, SimAir=0x00007fffffffb7d3) at ZoneEquipmentManager.cc:3292:62
    frame #9: 0x00005555610b20e2 energyplus_tests`EnergyPlus::ZoneEquipmentManager::ManageZoneEquipment(state=0x000055556e294830, FirstHVACIteration=true, SimZone=0x00007fffffffb7d4, SimAir=0x00007fffffffb7d3) at ZoneEquipmentManager.cc:160:25
    frame #10: 0x00005555605c17bb energyplus_tests`EnergyPlus::SizingManager::ManageSizing(state=0x000055556e294830) at SizingManager.cc:577:28
    frame #11: 0x000055555dcc174a energyplus_tests`EnergyPlusFixture_UnitarySystemModel_MultispeedDXHeatingCoilOnly_Test::TestBody(this=0x000055556e294070) at UnitarySystem.unit.cc:11094:32
    frame #12: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e294070, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #13: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e294070) at gtest.cc:2682:50
    frame #14: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e257fe0) at gtest.cc:2861:14
    frame #15: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #16: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #17: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #18: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #19: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #20: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc0f8) at main.cc:71:25
    frame #21: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc0f8, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0e8) at libc-start.c:308:16
    frame #22: 0x000055555a943e0e energyplus_tests`_start + 46

EnergyPlusFixture.ZonePTHP_ElectricityRateTest

[ RUN      ] EnergyPlusFixture.ZonePTHP_ElectricityRateTest
Process 1052619 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
    frame #0: 0x000055555e8ce3e0 energyplus_tests`EnergyPlus::DXCoils::CalcDXHeatingCoil(state=0x000055556e294820, DXCoilNum=2, PartLoadRatio=1, fanOp=Cycling, OnOffAirFlowRatio=Optional<double const> @ 0x00007fffffff8810, MaxHeatCap=Optional<double const> @ 0x00007fffffff8820) at DXCoils.cc:11056:26
   11053	        }
   11054	
   11055	        //  Get total capacity modifying factor (function of mass flow) for off-rated conditions
-> 11056	        AirMassFlowRatio = AirMassFlow / thisDXCoil.RatedAirMassFlowRate(Mode);
    	                         ^
   11057	        TotCapFlowModFac = CurveValue(state, thisDXCoil.CCapFFlow(Mode), AirMassFlowRatio);
   11058	
   11059	        // Calculate total heating capacity for off-rated conditions
Process 1052619 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
  * frame #0: 0x000055555e8ce3e0 energyplus_tests`EnergyPlus::DXCoils::CalcDXHeatingCoil(state=0x000055556e294820, DXCoilNum=2, PartLoadRatio=1, fanOp=Cycling, OnOffAirFlowRatio=Optional<double const> @ 0x00007fffffff8810, MaxHeatCap=Optional<double const> @ 0x00007fffffff8820) at DXCoils.cc:11056:26
    frame #1: 0x000055555e816bbe energyplus_tests`EnergyPlus::DXCoils::SimDXCoil(state=0x000055556e294820, CompName=(_M_len = 33, _M_str = "PTHP THERMAL ZONE ONE DX HTG COIL"), compressorOp=On, FirstHVACIteration=false, CompIndex=0x000055556e9d5870, fanOp=Cycling, PartLoadRatio=Optional<double const> @ 0x00007fffffff8ad0, OnOffAFR=Optional<double const> @ 0x00007fffffff8ae0, CoilCoolingHeatingPLRRatio=Optional<double const> @ 0x00007fffffff8af0, MaxCap=Optional<double const> @ 0x00007fffffff8b00, CompCyclingRatio=Optional<double const> @ 0x00007fffffff8b10) at DXCoils.cc:218:26
    frame #2: 0x0000555560b1c28d energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::calcUnitaryHeatingSystem(this=0x000055556e9d52a0, state=0x000055556e294820, AirLoopNum=0, FirstHVACIteration=false, PartLoadRatio=1, CompressorOn=On, OnOffAirFlowRatio=1, HeatCoilLoad=0) at UnitarySystem.cc:11774:31
    frame #3: 0x0000555560b16885 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::calcUnitarySystemToLoad(this=0x000055556e9d52a0, state=0x000055556e294820, AirLoopNum=0, FirstHVACIteration=false, CoolPLR=0, HeatPLR=1, OnOffAirFlowRatio=0x00007fffffffa118, SensOutput=0x00007fffffff9008, LatOutput=0x00007fffffff9010, HXUnitOn=false, HeatCoilLoad=0, SuppCoilLoad=0, CompressorOn=On) at UnitarySystem.cc:11193:47
    frame #4: 0x0000555560afff70 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::controlUnitarySystemOutput(this=0x000055556e9d52a0, state=0x000055556e294820, AirLoopNum=0, FirstHVACIteration=false, OnOffAirFlowRatio=0x00007fffffffa118, ZoneLoad=30000, FullSensibleOutput=0x00007fffffffa120, HXUnitOn=0x00007fffffffa0e4, CompressorOn=On) at UnitarySystem.cc:8639:42
    frame #5: 0x0000555560af7b94 energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::controlUnitarySystemtoLoad(this=0x000055556e9d52a0, state=0x000055556e294820, AirLoopNum=0, FirstHVACIteration=false, CompressorOn=0x00007fffffffa2dc, OAUCoilOutTemp=0, HXUnitOn=false, sysOutputProvided=0x00007fffffffa488, latOutputProvided=0x00007fffffffa490) at UnitarySystem.cc:7724:45
    frame #6: 0x0000555560a7d06b energyplus_tests`EnergyPlus::UnitarySystems::UnitarySys::simulate(this=0x000055556e9d52a0, state=0x000055556e294820, Name=(_M_len = 21, _M_str = "PTHP THERMAL ZONE ONE"), FirstHVACIteration=false, AirLoopNum=0, CompIndex=0x00007fffffffa47c, HeatActive=0x00007fffffffa470, CoolActive=0x00007fffffffa471, ZoneOAUnitNum=0, OAUCoilOutTemp=0, ZoneEquipment=true, sysOutputProvided=0x00007fffffffa488, latOutputProvided=0x00007fffffffa490) at UnitarySystem.cc:155:45
    frame #7: 0x000055555cf1dafd energyplus_tests`EnergyPlus::EnergyPlusFixture_ZonePTHP_ElectricityRateTest_Test::TestBody(this=0x000055556e293f50) at PackagedTerminalHeatPump.unit.cc:4658:20
    frame #8: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e293f50, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #9: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e293f50) at gtest.cc:2682:50
    frame #10: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e1ff560) at gtest.cc:2861:14
    frame #11: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e153d10) at gtest.cc:3015:31
    frame #12: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #13: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #14: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #15: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #16: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc108) at main.cc:71:25
    frame #17: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc108, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0f8) at libc-start.c:308:16
    frame #18: 0x000055555a943e0e energyplus_tests`_start + 46

SQLiteFixture.DXCoils_TestComponentSizingOutput_SingleSpeed

[ RUN      ] SQLiteFixture.DXCoils_TestComponentSizingOutput_SingleSpeed
Process 1052701 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
    frame #0: 0x000055555e431ab7 energyplus_tests`EnergyPlus::CoolingCapacitySizer::size(this=0x00007fffffffa600, state=0x000055556e294830, _originalValue=-99999, errorsFound=0x00007fffffff8889) at CoolingCapacitySizing.cc:504:42
   501 	                                                 HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT]));
   502 	                    }
   503 	
-> 504 	                    DXFlowPerCapMinRatio = (DesVolFlow / HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT]) /
    	                                         ^
   505 	                                           this->autoSizedValue; // set DX Coil Capacity Increase Ratio from Too Low Flow/Capacity Ratio
   506 	                    this->autoSizedValue = DesVolFlow / HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT];
   507
Process 1052701 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
  * frame #0: 0x000055555e431ab7 energyplus_tests`EnergyPlus::CoolingCapacitySizer::size(this=0x00007fffffffa600, state=0x000055556e294830, _originalValue=-99999, errorsFound=0x00007fffffff8889) at CoolingCapacitySizing.cc:504:42
    frame #1: 0x000055555e8982db energyplus_tests`EnergyPlus::DXCoils::SizeDXCoil(state=0x000055556e294830, DXCoilNum=1) at DXCoils.cc:7629:73
    frame #2: 0x000055555b71155a energyplus_tests`EnergyPlus::SQLiteFixture_DXCoils_TestComponentSizingOutput_SingleSpeed_Test::TestBody(this=0x000055556e2940c0) at DXCoils.unit.cc:3514:24
    frame #3: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e2940c0, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #4: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e2940c0) at gtest.cc:2682:50
    frame #5: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e17e850) at gtest.cc:2861:14
    frame #6: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e164f80) at gtest.cc:3015:31
    frame #7: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #8: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #9: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #10: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #11: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc108) at main.cc:71:25
    frame #12: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc108, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0f8) at libc-start.c:308:16
    frame #13: 0x000055555a943e0e energyplus_tests`_start + 46

SQLiteFixture.DXCoils_TestComponentSizingOutput_TwoSpeed

[ RUN      ] SQLiteFixture.DXCoils_TestComponentSizingOutput_TwoSpeed
Process 1052743 stopped
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
    frame #0: 0x000055555e431ab7 energyplus_tests`EnergyPlus::CoolingCapacitySizer::size(this=0x00007fffffffa410, state=0x000055556e294810, _originalValue=-99999, errorsFound=0x00007fffffff8699) at CoolingCapacitySizing.cc:504:42
   501 	                                                 HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT]));
   502 	                    }
   503 	
-> 504 	                    DXFlowPerCapMinRatio = (DesVolFlow / HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT]) /
    	                                         ^
   505 	                                           this->autoSizedValue; // set DX Coil Capacity Increase Ratio from Too Low Flow/Capacity Ratio
   506 	                    this->autoSizedValue = DesVolFlow / HVAC::MinRatedVolFlowPerRatedTotCap[(int)state.dataHVACGlobal->DXCT];
   507
Process 1052743 launched: '/home/julien/Software/Others/EnergyPlus-build2/Products/energyplus_tests' (x86_64)
(lldb) bt
* thread #1, name = 'energyplus_test', stop reason = signal SIGFPE: floating point divide by zero
  * frame #0: 0x000055555e431ab7 energyplus_tests`EnergyPlus::CoolingCapacitySizer::size(this=0x00007fffffffa410, state=0x000055556e294810, _originalValue=-99999, errorsFound=0x00007fffffff8699) at CoolingCapacitySizing.cc:504:42
    frame #1: 0x000055555e8982db energyplus_tests`EnergyPlus::DXCoils::SizeDXCoil(state=0x000055556e294810, DXCoilNum=1) at DXCoils.cc:7629:73
    frame #2: 0x000055555b70a679 energyplus_tests`EnergyPlus::SQLiteFixture_DXCoils_TestComponentSizingOutput_TwoSpeed_Test::TestBody(this=0x000055556e2940a0) at DXCoils.unit.cc:3290:24
    frame #3: 0x000055556138780d energyplus_tests`void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(object=0x000055556e2940a0, method=21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00, location="the test body")(), char const*) at gtest.cc:2665:29
    frame #4: 0x000055556133ed2f energyplus_tests`testing::Test::Run(this=0x000055556e2940a0) at gtest.cc:2682:50
    frame #5: 0x000055556133feba energyplus_tests`testing::TestInfo::Run(this=0x000055556e17e650) at gtest.cc:2861:14
    frame #6: 0x0000555561340dba energyplus_tests`testing::TestSuite::Run(this=0x000055556e164f80) at gtest.cc:3015:31
    frame #7: 0x000055556135b2cb energyplus_tests`testing::internal::UnitTestImpl::RunAllTests(this=0x000055556e152730) at gtest.cc:5855:47
    frame #8: 0x0000555561389a70 energyplus_tests`bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(object=0x000055556e152730, method=7a ab 35 61 55 55 00 00 00 00 00 00 00 00 00 00, location="auxiliary test code (environments or event listeners)")(), char const*) at gtest.cc:2665:29
    frame #9: 0x0000555561358943 energyplus_tests`testing::UnitTest::Run(this=0x000055556dca7a80) at gtest.cc:5438:55
    frame #10: 0x000055555e3c1c1c energyplus_tests`RUN_ALL_TESTS() at gtest.h:2490:49
    frame #11: 0x000055555e3c1b1f energyplus_tests`main(argc=1, argv=0x00007fffffffc108) at main.cc:71:25
    frame #12: 0x00007ffff715d083 libc.so.6`__libc_start_main(main=(energyplus_tests`main at main.cc:59:1), argc=2, argv=0x00007fffffffc108, init=<unavailable>, fini=<unavailable>, rtld_fini=<unavailable>, stack_end=0x00007fffffffc0f8) at libc-start.c:308:16
    frame #13: 0x000055555a943e0e energyplus_tests`_start + 46

jmarrec · 2024-08-16T10:03:36Z

Closed via #10578

jmarrec added Defect Includes code to repair a defect in EnergyPlus Developer Issue Related to cmake, packaging, installers, or developer tooling (CI, etc) labels Aug 8, 2024

jmarrec self-assigned this Aug 8, 2024

jmarrec mentioned this issue Aug 9, 2024

StandardsRatings: calculation of metrics can crash if certain preconditions aren't met #10651

Closed

3 tasks

This was referenced Aug 12, 2024

PolygonClipping: CLIPLINE produces NaN when line to clip is parallel to the maxX of the clip window #10656

Closed

Enable Floating point exceptions by default in Debug mode (GCC/Clang) #10578

Merged

Myoldmopar added the MediumComplexityApproved Used for subcontractor defect complexity requests label Aug 14, 2024

jmarrec closed this as completed Aug 16, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix unit test floating point exceptions so we can enable Floating point exceptions by default in Debug mode (GCC/Clang) #10648

Fix unit test floating point exceptions so we can enable Floating point exceptions by default in Debug mode (GCC/Clang) #10648

jmarrec commented Aug 8, 2024 •

edited

Loading

jmarrec commented Aug 9, 2024 •

edited

Loading

jmarrec commented Aug 16, 2024

Fix unit test floating point exceptions so we can enable Floating point exceptions by default in Debug mode (GCC/Clang) #10648

Fix unit test floating point exceptions so we can enable Floating point exceptions by default in Debug mode (GCC/Clang) #10648

Comments

jmarrec commented Aug 8, 2024 • edited Loading

Issue overview

Left-out

Details

Checklist

jmarrec commented Aug 9, 2024 • edited Loading

EnergyPlusFixture.DXCoils_Test2

EnergyPlusFixture.MultiSpeedDXCoolingCoilOutputTest

EnergyPlusFixture.SingleSpeedDXCoolingCoilOutputTest

EnergyPlusFixture.SolarShadingTest_PolygonClippingDirect

EnergyPlusFixture.TestMultiSpeedCoilsAutoSizingOutput

EnergyPlusFixture.TestReadingCoilCoolingHeatingDX

EnergyPlusFixture.TwoSpeedDXCoilStandardRatingsTest

EnergyPlusFixture.TwoSpeedDXCoilStandardRatings_Curve_Fix_Test

EnergyPlusFixture.UnitarySystemModel_MultispeedDXCoilHeatRecoveryHandling

EnergyPlusFixture.UnitarySystemModel_MultispeedDXCoilSizing

EnergyPlusFixture.UnitarySystemModel_MultispeedDXHeatingCoilOnly

EnergyPlusFixture.ZonePTHP_ElectricityRateTest

SQLiteFixture.DXCoils_TestComponentSizingOutput_SingleSpeed

SQLiteFixture.DXCoils_TestComponentSizingOutput_TwoSpeed

jmarrec commented Aug 16, 2024

jmarrec commented Aug 8, 2024 •

edited

Loading

jmarrec commented Aug 9, 2024 •

edited

Loading