From 5a8e61bb9a48b7f415b6b89b30ff8db28d6d6c0e Mon Sep 17 00:00:00 2001 From: Charles Martin Date: Fri, 8 Nov 2024 16:15:38 +1100 Subject: [PATCH] minor updates --- papers/latex/nime-template.tex | 236 +++------------------------------ 1 file changed, 17 insertions(+), 219 deletions(-) diff --git a/papers/latex/nime-template.tex b/papers/latex/nime-template.tex index cb47b00..a3984b5 100644 --- a/papers/latex/nime-template.tex +++ b/papers/latex/nime-template.tex @@ -57,7 +57,8 @@ % the number of 'columns' to three. % % Because of the available 'opening page real-estate' -\label{key}% we ask you to refrain from putting more than six authors +\label{key} +% we ask you to refrain from putting more than six authors % (two rows with three columns) beneath the article title. % More than six makes the first-page appear very cluttered indeed. % @@ -70,10 +71,8 @@ % without further effort on your part as the last section in % the body of your article BEFORE References or any Appendices. -\numberofauthors{8} % in this sample file, there are a *total* -% of EIGHT authors. SIX appear on the 'first-page' (for formatting -% reasons) and the remaining two appear in the \additionalauthors section. -% +\numberofauthors{6} + \author{ % You can go ahead and credit any number of authors here, % e.g. one 'row of three' or two rows (consisting of one row of three @@ -87,22 +86,20 @@ % % 1st. author \alignauthor -\anonymize{Ben Trovato}\titlenote{\anonymize{Dr.~Trovato insisted his name be first.}}\\ +\anonymize{Ben Trovato}\\ \affaddr{\anonymize{Institute for Clarity in Documentation}}\\ \affaddr{\anonymize{1932 Wallamaloo Lane}}\\ \affaddr{\anonymize{Wallamaloo, New Zealand}}\\ \email{\anonymize{trovato@corporation.com}} % 2nd. author \alignauthor -\anonymize{G.K.M. Tobin}\titlenote{\anonymize{The secretary disavows -any knowledge of this author's actions.}}\\ +\anonymize{G.K.M. Tobin}\\ \affaddr{\anonymize{Institute for Clarity in Documentation}}\\ \affaddr{\anonymize{P.O. Box 1212}}\\ \affaddr{\anonymize{Dublin, Ohio 43017-6221}}\\ \email{\anonymize{webmaster@marysville-ohio.com}} % 3rd. author -\alignauthor \anonymize{Lars Th{\o}rv{\"a}ld}\titlenote{This author is the -one who did all the really hard work.}\\ +\alignauthor \anonymize{Lars Th{\o}rv{\"a}ld}\\ \affaddr{\anonymize{The Th{\o}rv{\"a}ld Group}}\\ \affaddr{\anonymize{1 Th{\o}rv{\"a}ld Circle}}\\ \affaddr{\anonymize{Hekla, Iceland}}\\ @@ -127,19 +124,6 @@ \affaddr{\anonymize{San Antonio, Texas 78229}}\\ \email{\anonymize{cpalmer@prl.com}} } -% There's nothing stopping you putting the seventh, eighth, etc. -% author on the opening page (as the 'third row') but we ask, -% for aesthetic reasons that you place these 'additional authors' -% in the \additional authors block, viz. -\additionalauthors{Additional authors: \anonymize{John Smith (The Th{\o}rv{\"a}ld Group,} -email: {\texttt{\anonymize{jsmith@affiliation.org}}}) and \anonymize{Julius P.~Kumquat -(K. Consortium,} email: {\texttt{\anonymize{jpkumquat@consortium.net}}}).} -\date{30 July 1999} -% Just remember to make sure that the TOTAL number of authors -% is the number that will appear on the first page PLUS the -% number that will appear in the \additionalauthors section. - -% For your initial submission you MUST ANONYMIZE the authors. \maketitle @@ -155,55 +139,14 @@ compiled under \LaTeX$2_\epsilon$\ and BibTeX. To make best use of this sample document, run it through \LaTeX\ -and BibTeX, and compare this source code with your compiled PDF file. A compiled PDF version is available to help you with the `look and feel.' \textbf{The paper submitted to the NIME conference must be stored in an \underline{A4}-sized PDF file, so North Americans should take care not to inadvertently generate \underline{letter} paper-sized PDF files.} This paper template should prevent that from happening if the \texttt{pdflatex} program is used to generate the PDF file. +and BibTeX, and compare this source code with your compiled PDF file. A compiled PDF version is available to help you with the `look and feel.' +\textbf{The paper submitted to the NIME conference must be stored in an \underline{A4}-sized PDF file, so North Americans should take care not to inadvertently generate \underline{letter} paper-sized PDF files.} This paper template should prevent that from happening if the \texttt{pdflatex} program is used to generate the PDF file. The abstract should preferably be between 100 and 200 words. \end{abstract} + \keywords{NIME, proceedings, \LaTeX, template} -% ------- CCS Concepts -% Here is where you enter the CCS Concepts for your paper. -% -% It is strongly recommended that authors view the submission form -% prior to starting to write the paper, which includes information -% on the CCS Concepts. -% -% The 2012 ACM Computing Classification System (CCS) replaces the -% traditional 1998 version, which has served as the de facto -% standard classification system for the computing field. It is -% being integrated into the search capabilities and visual topic -% displays of the ACM Digital Library. Please enter the CCS XML code -% for the classification terms that describe your paper. To get the -% XML code, please use the following procedure, which is -% demonstrated using three NIME-related example terms: Applied -% computing~Sound and music computing, Applied computing~Performing -% arts, and Information systems~Music retrieval. -% -% 1) Browse to the website http://dl.acm.org/ccs_flat.cfm. -% 2) Select one to three classification terms from the website that -% describe your paper (e.g. for the example paper Applied -% computing~Sound and music computing, Applied -% computing~Performing arts, and Information systems~Music -% retrieval.). -% 3) For each classification you need to select the relevance -% (e.g. for this example, Sound and music computing is "high", -% Performing arts is "low", and Music retrieval is "Medium") -% 4) Once you have selected the last term, click on "view CCS Tex -% Code". This will generate some code, which includes some CCSXML -% and some lines beginning with \ccsdesc. -% 5) Keep all of this code, as you will need it for entering into -% the Precision Conference System paper submission form. -% 6) For this document, keep only the \ccsdesc lines. Here is what -% you would paste for the classification example: - -\ccsdesc[500]{Applied computing~Sound and music computing} -\ccsdesc[100]{Applied computing~Performing arts} -\ccsdesc[300]{Information systems~Music retrieval} - -% this line creates the CCS Concepts section. -\printccsdesc - -\textbf{Please read the comments starting on line 140 of the nime-template.tex file to see how to create the CCS Concept Classifications!} % Remove this line in your paper! \section{Introduction} The \textit{proceedings} are the records of a conference. @@ -228,7 +171,7 @@ \section{Introduction} proceedings paper, rather than with giving rigorous descriptions or explanations of such commands. -\section{The {\secit Body} of The Paper} +\section{The Body of The Paper} Typically, the body of a paper is organized into a hierarchical structure, with numbered or unnumbered headings for sections, subsections, sub-subsections, and even @@ -252,7 +195,8 @@ \section{The {\secit Body} of The Paper} start of a new paragraph with a blank line in your input file; that is why this sentence forms a separate paragraph. -\subsection{Type Changes and {\subsecit Special} Characters} +\subsection{Type Changes and Special Characters} + We have already seen several typeface changes in this sample. You can indicate italicized words or phrases in your text with the command \texttt{{\char'134}textit}; emboldening with the @@ -277,7 +221,6 @@ \subsection{Type Changes and {\subsecit Special} Characters} available in the \textit{\LaTeX\ User's Guide} \cite{Lamport:LaTeX}. - \subsection{Tables} Because tables cannot be split across pages, the best placement for them is typically the top of the page @@ -394,87 +337,6 @@ \subsubsection{Display Equations} \begin{equation}\sum_{i=0}^{\infty}x_i=\int_{0}^{\pi+2} f\end{equation} just to demonstrate \LaTeX's able handling of numbering. - - -\subsection{Theorem-like Constructs} -Other common constructs that may occur in your article are -the forms for logical constructs like theorems, axioms, -corollaries and proofs. There are -two forms, one produced by the -command \texttt{{\char'134}newtheorem} and the -other by the command \texttt{{\char'134}newdef}; perhaps -the clearest and easiest way to distinguish them is -to compare the two in the output of this sample document: - -This uses the \textbf{theorem} environment, created by -the\linebreak\texttt{{\char'134}newtheorem} command: -\newtheorem{theorem}{Theorem} -\begin{theorem} -Let $f$ be continuous on $[a,b]$. If $G$ is -an antiderivative for $f$ on $[a,b]$, then -\begin{displaymath}\int^b_af(t)dt = G(b) - G(a).\end{displaymath} -\end{theorem} - -The other uses the \textbf{definition} environment, created -by the \texttt{{\char'134}newdef} command: -\newdef{definition}{Definition} -\begin{definition} -If $z$ is irrational, then by $e^z$ we mean the -unique number which has -logarithm $z$: \begin{displaymath}{\log e^z = z}\end{displaymath} -\end{definition} - -Two lists of constructs that use one of these -forms is given in the -\textit{Author's Guidelines}. - -There is one other similar construct environment, which is -already set up -for you; i.e. you must \textit{not} use -a \texttt{{\char'134}newdef} command to -create it: the \textbf{proof} environment. Here -is a example of its use: -\begin{proof} -Suppose on the contrary there exists a real number $L$ such that -\begin{displaymath} -\lim_{x\rightarrow\infty} \frac{f(x)}{g(x)} = L. -\end{displaymath} -Then -\begin{displaymath} -l=\lim_{x\rightarrow c} f(x) -= \lim_{x\rightarrow c} -\left[ g{x} \cdot \frac{f(x)}{g(x)} \right ] -= \lim_{x\rightarrow c} g(x) \cdot \lim_{x\rightarrow c} -\frac{f(x)}{g(x)} = 0, -\end{displaymath} -which contradicts our assumption that $l\neq 0$. -\end{proof} - -Complete rules about using these environments and using the -two different creation commands are in the -\textit{Author's Guide}; please consult it for more -detailed instructions. If you need to use another construct, -not listed therein, which you want to have the same -formatting as the Theorem -or the Definition \cite{salas:calculus} shown above, -use the \texttt{{\char'134}newtheorem} or the -\texttt{{\char'134}newdef} command, -respectively, to create it. - -\subsection{A {\secit Caveat} for the \TeX\ Expert} -Because you have just been given permission to -use the \texttt{{\char'134}newdef} command to create a -new form, you might think you can -use \TeX's \texttt{{\char'134}def} to create a -new command: \textit{Please refrain from doing this!} -Remember that your \LaTeX\ source code is primarily intended -to create camera-ready copy, but may be converted -to other forms -- e.g. HTML. If you inadvertently omit -some or all of the \texttt{{\char'134}def}s recompilation will -be, to say the least, problematic. - - - \subsection{Citations} Citations to articles \cite{bowman:reasoning, clark:pct, braams:babel, herlihy:methodology}, @@ -549,82 +411,18 @@ \section{Conclusions} %ACKNOWLEDGMENTS are optional \section{Acknowledgments} -This section is optional; it is a location for you -to acknowledge grants, funding, editing assistance and -what have you. In the present case, for example, the -authors would like to thank Gerald Murray of ACM for -his help in codifying this \textit{Author's Guide} -and the \textbf{.cls} and \textbf{.tex} files that it describes. +This section is optional and a place for you to acknowledge non-author contributors, grants or funding, or any other support received which you would like to recognise. In general, this section should be anonymised in initial submissions. \section{Ethical Standards} -To ensure objectivity and transparency in research and to ensure that accepted principles of ethical and professional conduct have been followed, authors should include a section “Ethical Standards” before the References, including (if relevant): information regarding sources of funding, potential conflicts of interest (financial or non-financial), informed consent if the research involved human participants, statement on welfare of animals if the research involved animals. - +To ensure objectivity and transparency in research and to ensure that accepted principles of ethical and professional conduct have been followed, authors must include a section “Ethical Standards” before the References. +This section should include (if relevant): information regarding sources of funding, potential conflicts of interest (financial or non-financial), informed consent if the research involved human participants, statement on welfare of animals if the research involved animals or any other information or context that helps ethically situate your research. +For help with the ethics section, feel free to ask on the NIME forum: \url{https://forum.nime.org}. -% -% The following command is all you need in the -% initial runs of your .tex file to -% produce the bibliography for the citations in your paper. \bibliography{references} -% You must have a proper ".bib" file -% and remember to run: -% latex bibtex latex latex -% to resolve all references -% -% ACM needs 'a single self-contained file'! -% -%APPENDICES are optional -\appendix -%Appendix A -\section{Headings in Appendices} -The rules about hierarchical headings discussed above for -the body of the article are different in the appendices. -In the \textbf{appendix} environment, the command -\textbf{section} is used to -indicate the start of each Appendix, with alphabetic order -designation (i.e. the first is A, the second B, etc.) and -a title (if you include one). So, if you need -hierarchical structure -\textit{within} an Appendix, start with \textbf{subsection} as the -highest level. Here is an outline of the body of this -document in Appendix-appropriate form: -\subsection{Introduction} -\subsection{The Body of the Paper} -\subsubsection{Type Changes and Special Characters} -\subsubsection{Math Equations} -\paragraph{Inline (In-text) Equations} -\paragraph{Display Equations} -\subsubsection{Citations} -\subsubsection{Tables} -\subsubsection{Figures} -\subsubsection{Theorem-like Constructs} -\subsubsection*{A Caveat for the \TeX\ Expert} -\subsection{Conclusions} -\subsection{Acknowledgments} -\subsection{Additional Authors} -This section is inserted by \LaTeX; you do not insert it. -You just add the names and information in the -\texttt{{\char'134}additionalauthors} command at the start -of the document. -\subsection{References} -Generated by bibtex from your ~.bib file. Run latex, -then bibtex, then latex twice (to resolve references) -to create the ~.bbl file. Insert that ~.bbl file into -the .tex source file and comment out -the command \texttt{{\char'134}thebibliography}. - -% This next section command marks the start of -% Appendix B, and does not continue the present hierarchy -\section{More Help for the Hardy} -The sig-alternate.cls file itself is chock-full of succinct -and helpful comments. If you consider yourself a moderately -experienced to expert user of \LaTeX, you may find reading -it useful but please remember not to change it. - %%% Place this command where you want to balance the columns on the last page. %\balancecolumns -% That's all folks! \end{document}