Skip to content

Momentary switch for OLED page switching

Jump to bottom
Mraanderson edited this page Nov 12, 2023 · 3 revisions

Display toggle switch

D4 and GND on the ESP board (SW and GND on the HBG3 board, if a pin is linked between D4 and SW) toggles display when using a momentary switch.

  • WiFi information (Default, no press required to get this at boot)
  • GPS information
  • OTA Update - press to update (resets OLED to WiFi info after checking)
  • QR code page
  • Blanking page

Switch fitted CloudyNights post

OLED display additional

Dew heater control screen if the hardware is detected.

  • Smart Dew Heater Control functionality
  • Optional SHT3x ambient sensor for temperature and humidity
  • Thermistor inputs (like from the Celestron Dew Ring accessories)

The Dew Heater functionality provides a faithful emulation of the Celestron 2X DewHeater Controller, enabling monitoring and control from Celestron Hand-Controllers and also from CPWI software on a computer.

Clone this wiki locally