diff --git a/bsp/board/include/boards/board_dspicdem_mc1_motor_control_development/board.cmake b/bsp/board/include/boards/board_dspicdem_mc1_motor_control_development/board.cmake new file mode 100644 index 000000000..f1e8f0150 --- /dev/null +++ b/bsp/board/include/boards/board_dspicdem_mc1_motor_control_development/board.cmake @@ -0,0 +1,5 @@ +if(${_MSDK_BOARD_NAME_} STREQUAL "DSPICDEM_MC1_MOTOR_CONTROL_DEVELOPMENT_BOARD") + set(BOARD_PATH "include/boards/board_dspicdem_mc1_motor_control_development") + set(MCU_CARD FALSE) + set(SHIELD FALSE) +endif() diff --git a/bsp/board/include/boards/board_dspicdem_mc1_motor_control_development/board.h b/bsp/board/include/boards/board_dspicdem_mc1_motor_control_development/board.h new file mode 100644 index 000000000..5d459ddfd --- /dev/null +++ b/bsp/board/include/boards/board_dspicdem_mc1_motor_control_development/board.h @@ -0,0 +1,121 @@ +/**************************************************************************** +** +** Copyright (C) ${COPYRIGHT_YEAR} MikroElektronika d.o.o. +** Contact: https://www.mikroe.com/contact +** +** This file is part of the mikroSDK package +** +** Commercial License Usage +** +** Licensees holding valid commercial NECTO compilers AI licenses may use this +** file in accordance with the commercial license agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and The MikroElektronika Company. +** For licensing terms and conditions see +** https://www.mikroe.com/legal/software-license-agreement. +** For further information use the contact form at +** https://www.mikroe.com/contact. +** +** +** GNU Lesser General Public License Usage +** +** Alternatively, this file may be used for +** non-commercial projects under the terms of the GNU Lesser +** General Public License version 3 as published by the Free Software +** Foundation: https://www.gnu.org/licenses/lgpl-3.0.html. +** +** The above copyright notice and this permission notice shall be +** included in all copies or substantial portions of the Software. +** +** THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +** OF MERCHANTABILITY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED +** TO THE WARRANTIES FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +** DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT +** OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE +** OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +** +****************************************************************************/ +/*! + * @file board.h + * @brief Main board pin mapping. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" +{ +#endif + +#define BOARD_NAME "dsPICDEM MC1 Motor Control Development Board" + +#include "hal_target.h" + +// Mapping +#define HEADER_CONNECTOR_CN1_D1 GPIO_PB10 +#define HEADER_CONNECTOR_CN1_D2 GPIO_PB1 +#define HEADER_CONNECTOR_CN1_D3 GPIO_PB8 +#define HEADER_CONNECTOR_CN1_D4 // Pin not routed +#define HEADER_CONNECTOR_CN1_D5 GPIO_PB13 +#define HEADER_CONNECTOR_CN1_D6 GPIO_PD10 +#define HEADER_CONNECTOR_CN1_D7 GPIO_PE7 +#define HEADER_CONNECTOR_CN1_D8 GPIO_PB9 +#define HEADER_CONNECTOR_CN1_D9 // Pin not routed +#define HEADER_CONNECTOR_CN1_D10 GPIO_PD5 +#define HEADER_CONNECTOR_CN1_D11 GPIO_PE5 +#define HEADER_CONNECTOR_CN1_D12 GPIO_PE3 +#define HEADER_CONNECTOR_CN1_D13 GPIO_PE1 +#define HEADER_CONNECTOR_CN1_D14 GPIO_PF6 +#define HEADER_CONNECTOR_CN1_D15 GPIO_PB15 +#define HEADER_CONNECTOR_CN1_D16 GPIO_PB1 +#define HEADER_CONNECTOR_CN1_D17 GPIO_PB6 +#define HEADER_CONNECTOR_CN1_D18 // Pin not routed +#define HEADER_CONNECTOR_CN1_D19 // Pin not routed +#define HEADER_CONNECTOR_CN1_D20 GPIO_PB2 +#define HEADER_CONNECTOR_CN1_D21 GPIO_PB0 +#define HEADER_CONNECTOR_CN1_D22 GPIO_PB14 +#define HEADER_CONNECTOR_CN1_D23 GPIO_PB14 +#define HEADER_CONNECTOR_CN1_D24 GPIO_PB12 +#define HEADER_CONNECTOR_CN1_D25 GPIO_PE6 +#define HEADER_CONNECTOR_CN1_D26 GPIO_PB11 +#define HEADER_CONNECTOR_CN1_D27 // Pin not routed +#define HEADER_CONNECTOR_CN1_D28 GPIO_PD4 +#define HEADER_CONNECTOR_CN1_D29 GPIO_PE4 +#define HEADER_CONNECTOR_CN1_D30 GPIO_PE2 +#define HEADER_CONNECTOR_CN1_D31 GPIO_PE0 +#define HEADER_CONNECTOR_CN1_D32 GPIO_PF7 +#define HEADER_CONNECTOR_CN1_D33 GPIO_PE9 +#define HEADER_CONNECTOR_CN1_D34 GPIO_PB2 +#define HEADER_CONNECTOR_CN1_D35 GPIO_PB0 +#define HEADER_CONNECTOR_CN1_D36 // Pin not routed +#define HEADER_CONNECTOR_CN1_D37 // Pin not routed + +// LCD +#define LCD_EN GPIO_PD13 +#define LCD_DB0 GPIO_PD0 +#define LCD_DB1 GPIO_PD1 +#define LCD_DB2 GPIO_PD2 +#define LCD_DB3 GPIO_PD3 +#define LCD_R_W GPIO_PC1 +#define LCD_D_C GPIO_PC3 + +// LEDS +#define LED1 GPIO_PA9 +#define LED2 GPIO_PA10 +#define LED3 GPIO_PA14 +#define LED4 GPIO_PA15 + +// BUTTONS +#define BUTTON1 GPIO_PG6 +#define BUTTON2 GPIO_PG7 +#define BUTTON3 GPIO_PG8 +#define BUTTON4 GPIO_PG9 + +#ifdef __cplusplus +} +#endif + +#endif // _BOARD_H_ +// ------------------------------------------------------------------------- END \ No newline at end of file diff --git a/changelog/v2.13.0/changelog.md b/changelog/v2.13.0/changelog.md index aa82535ff..1a5d34344 100644 --- a/changelog/v2.13.0/changelog.md +++ b/changelog/v2.13.0/changelog.md @@ -122,6 +122,7 @@ Support added for following hardware: + **[2024-12-24](./new_hw/2024-12-24.md)** + **[2024-12-25](./new_hw/2024-12-25.md)** ++ **[2024-12-26](./new_hw/2024-12-26.md)** --- diff --git a/changelog/v2.13.0/new_hw/2024-12-26.md b/changelog/v2.13.0/new_hw/2024-12-26.md new file mode 100644 index 000000000..51020da12 --- /dev/null +++ b/changelog/v2.13.0/new_hw/2024-12-26.md @@ -0,0 +1,29 @@ +

+ MikroElektronika +

+ +--- + +**[BACK TO PREVIOUS FILE](../changelog.md)** + +--- + +# 2024-12-26 + +## Changes + +- [2024-12-26](#2024-12-26) + - [Changes](#changes) + - [NEW HARDWARE](#new-hardware) + +### NEW HARDWARE + +Support added for following hardware: + ++ [dsPICDEM MC1 Motor Control Development Board](https://mplab-discover.microchip.com/v2/item/com.microchip.portal.evalboard/com.microchip.subcategories.modules-and-peripherals.communication.can.Others/mcu08.dm300020/1.0.0?view=about) + +--- + +**[BACK TO PREVIOUS FILE](../changelog.md)** + +--- diff --git a/resources/images/boards/board-dspicdem-mc1-motor-control-development.png b/resources/images/boards/board-dspicdem-mc1-motor-control-development.png new file mode 100644 index 000000000..369d16ba3 Binary files /dev/null and b/resources/images/boards/board-dspicdem-mc1-motor-control-development.png differ diff --git a/resources/queries/boards/board_dspicdem_mc1_motor_control_development/Boards.json b/resources/queries/boards/board_dspicdem_mc1_motor_control_development/Boards.json new file mode 100644 index 000000000..1d42fc581 --- /dev/null +++ b/resources/queries/boards/board_dspicdem_mc1_motor_control_development/Boards.json @@ -0,0 +1,16 @@ +{ + "uid": "DSPICDEM_MC1_MOTOR_CONTROL_DEVELOPMENT_BOARD", + "name": "dsPICDEM MC1 Motor Control Development Board", + "icon": "images/boards/board-dspicdem-mc1-motor-control-development.png", + "default_device": "", + "soldered_device": "DSPIC30F6010", + "category": "Development Systems", + "mikrobus_count": 0, + "sort_order": 6, + "min_pin_count": 0, + "display_socket": "NO_DISPLAY", + "sdk_config": "{\"_MSDK_BOARD_NAME_\":\"DSPICDEM_MC1_MOTOR_CONTROL_DEVELOPMENT_BOARD\"}", + "necto_config": "", + "display": "NO_DISPLAY", + "package_uid": "64/TQFP" +} diff --git a/resources/queries/boards/board_dspicdem_mc1_motor_control_development/LinkerTables.json b/resources/queries/boards/board_dspicdem_mc1_motor_control_development/LinkerTables.json new file mode 100644 index 000000000..c0e365fc2 --- /dev/null +++ b/resources/queries/boards/board_dspicdem_mc1_motor_control_development/LinkerTables.json @@ -0,0 +1,20 @@ +{ + "board_uid": "DSPICDEM_MC1_MOTOR_CONTROL_DEVELOPMENT_BOARD", + "tables": [ + { + "BoardToDevice": { + "device_uid": "DSPIC30F6010" + } + }, + { + "BoardToSocket": { + "socket_uid": ["NONE"] + } + }, + { + "SDKToBoard": { + "sdk_uid": "2.11.2+" + } + } + ] +}