Skip to content

Latest commit

 

History

History
165 lines (119 loc) · 4.59 KB

how_to_add_a_gps_receiver.md

File metadata and controls

165 lines (119 loc) · 4.59 KB

How to add a new GPS Receiver

Introduction

GPS receiver is a device that receives information from GPS satellites and then calculates the device's geographical position, velocity and precise time. The device usually includes a receiver, an IMU (depends on the model), an interface to a wheel encoder, and a fusion engine that combines information from those sensors. The Default GPS receiver used in Apollo is Novatel cards. The instruction demonstrates how to add and use a new GPS Receiver.

Steps to add a new GPS Receiver

Please follow the steps below to add a new GPS Receiver.

  1. Implement the new data parser for the new GPS receiver, by inheriting class Parser
  2. Add new interfaces in Parser class for the new GPS receiver
  3. In config.proto, add the new data format for the new GPS receiver
  4. In function create_parser from file data_parser.cpp, add the new parser instance for the new GPS receiver

Let's look at how to add the GPS Receiver using the above mentioned steps for Reciever: u-blox.

Step 1

Let us implement the new data parser for the new GPS receiver, by inheriting class Parser:

class UbloxParser : public Parser {
public:
    UbloxParser();

    virtual MessageType get_message(MessagePtr& message_ptr);

private:
    bool verify_checksum();

    Parser::MessageType prepare_message(MessagePtr& message_ptr);

    // The handle_xxx functions return whether a message is ready.
    bool handle_esf_raw(const ublox::EsfRaw* raw, size_t data_size);
    bool handle_esf_ins(const ublox::EsfIns* ins);
    bool handle_hnr_pvt(const ublox::HnrPvt* pvt);
    bool handle_nav_att(const ublox::NavAtt *att);
    bool handle_nav_pvt(const ublox::NavPvt* pvt);
    bool handle_nav_cov(const ublox::NavCov *cov);
    bool handle_rxm_rawx(const ublox::RxmRawx *raw);

    double _gps_seconds_base = -1.0;

    double _gyro_scale = 0.0;

    double _accel_scale = 0.0;

    float _imu_measurement_span = 0.0;

    int _imu_frame_mapping = 5;

    double _imu_measurement_time_previous = -1.0;

    std::vector<uint8_t> _buffer;

    size_t _total_length = 0;

    ::apollo::drivers::gnss::Gnss _gnss;
    ::apollo::drivers::gnss::Imu _imu;
    ::apollo::drivers::gnss::Ins _ins;
};

Step 2

Let us now add the new interfaces in the Parser class for the new GPS receiver:

Add the function create_ublox in Parser class:

class Parser {
public:
    // Return a pointer to a NovAtel parser. The caller should take ownership.
    static Parser* create_novatel();

    // Return a pointer to a u-blox parser. The caller should take ownership.
    static Parser* create_ublox();

    virtual ~Parser() {}

    // Updates the parser with new data. The caller must keep the data valid until get_message()
    // returns NONE.
    void update(const uint8_t* data, size_t length) {
        _data = data;
        _data_end = data + length;
    }

    void update(const std::string& data) {
        update(reinterpret_cast<const uint8_t*>(data.data()), data.size());
    }

    enum class MessageType {
        NONE,
        GNSS,
        GNSS_RANGE,
        IMU,
        INS,
        WHEEL,
        EPHEMERIDES,
        OBSERVATION,
        GPGGA,
    };

    // Gets a parsed protobuf message. The caller must consume the message before calling another
    // get_message() or update();
    virtual MessageType get_message(MessagePtr& message_ptr) = 0;

protected:
    Parser() {}

    // Point to the beginning and end of data. Do not take ownership.
    const uint8_t* _data = nullptr;
    const uint8_t* _data_end = nullptr;

private:
    DISABLE_COPY_AND_ASSIGN(Parser);
};

Parser* Parser::create_ublox() {
    return new UbloxParser();
}

Step 3

In config.proto, let us add the new data format definition for the new GPS receiver:

Add UBLOX_TEXT and UBLOX_BINARY in the config file: modules/drivers/gnss/proto/config.proto

message Stream {
    enum Format {
        UNKNOWN = 0;
        NMEA = 1;
        RTCM_V2 = 2;
        RTCM_V3 = 3;

        NOVATEL_TEXT = 10;
        NOVATEL_BINARY = 11;

        UBLOX_TEXT = 20;
        UBLOX_BINARY = 21;
    }
... ...

Step 4

In function create_parser from file data_parser.cpp, let us add the new parser instance for the new GPS receiver. We will do so by adding code to process config::Stream::UBLOX_BINARY as below:

Parser* create_parser(config::Stream::Format format, bool is_base_station = false) {
    switch (format) {
    case config::Stream::NOVATEL_BINARY:
        return Parser::create_novatel();

    case config::Stream::UBLOX_BINARY:
        return Parser::create_ubloxl();

    default:
        return nullptr;
    }
}