Problem to create a new scenario

[ronnierfr]

Hello,
First of all, I would like to congratulations on the developed GADEN package. He's sensational. I am trying to create a scenario similar to what you have developed known as "10x6_empty_room", but with reduced measures, as I need a 50x40 cm "room". I used your cad as a basis to change the scale and get an inner ".stl" file next to what I need. So I imported this file into SimScale, I managed to perform the "Mesh", but when I try to run the CFD simulation, I have problems related to the "Courant number (CFL)", because it exceeds the limit of 1. I don't know if the problem is with the settings I made for the simulation or some other. Could you help me in any way? I used the parameters suggested by you as: Boundary Conditions: Velocity Inlet (assigns random values ​​for these speeds) and Pressure Outlet and the other recommended settings. I need some help.
Thank you. Ronnier Frates Rohrich.

[MSathler]

Hi @ronnierfr,

I have created a tutorial with more details, if you are interested, I've left a link below.
https://github.com/MSathler/tutorial_gaden_environment/blob/main/Gaden_Environment_Tutorial.pdf

Regards.

[ronnierfr]

Hi Muricio, Thank you very much for your attention and for sending the tutorial. This document will be of great help in my research. Best regards. Em qua., 19 de out. de 2022 às 23:09, Maurício Souza Sathler < ***@***.***> escreveu:

…

Hi @ronnierfr <https://github.com/ronnierfr>, I have created a tutorial with more details, if you are interested, I've left a link below. https://github.com/MSathler/tutorial_gaden_environment/blob/main/Gaden_Environment_Tutorial.pdf Regards. — Reply to this email directly, view it on GitHub <#17 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJQS5IZK7RCIY6FGTBRIJA3WECSUFANCNFSM4MRB6QQQ> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[TaiE64]

Hi @ronnierfr,

I have created a tutorial with more details, if you are interested, I've left a link below. https://github.com/MSathler/tutorial_gaden_environment/blob/main/Gaden_Environment_Tutorial.pdf

Regards.

Thank you so much Sir!