It's a small webserver that receives DNS update requests and uses an external tool like nsupdate to talk to the authoritative DNS server.
The dyndnsd program is written in such a way that it can interface with the nsupdate program but I'm using zonegen which allows me to not hand complete control of the Zone file over to the DNS server so that I can still manually edit the non-dynamic parts of the Zone file.
Take a look at nix/e2e-test.nix for an example. You need to import the module and overlay provided by this flake.
I use this service only on NixOS but it should just work on other Linux distributions as well.
- Install a rust compiler
- Compile the program from source with
cargo build - Copy the binary into a sensible location like
/usr/local/bin - Copy the systemd unit from
systemd/dyndnsd.serviceto/etc/systemd/system/dyndnsd.serviceand adapt it to your needs - Copy the example configuration file to
/etc/dyndnsd/config.toml - Modify or add users and domains in the configuration file
- You need to generate a new password hash for each user
- Choose a strong password!
- Do not reuse the provided insecure password hashes!
- Enable and start the systemd unit
- Set up a reverse proxy with
nginxto add TLS - Set up an update client to use the correct URL
If you want to update an IP address in your local network at home, I recommend using your router for this if possible. Your router knows when its IP address changes and can send an update immediately. This removes the need for frequent periodic updates.
- FRITZ!Box routers
- OpenWrt
This daemon provides the most flexible IPv6 support of any DNS update client I know of.
This is required if you run the update client on your router but want to update the DNS record of a device behind the router.
In this case your internet provider probably gives you a dynamic IPv6 prefix (often 56 bits).
Your router then picks some address range such that each host in your local network can pick 64 bit of the address.
With the above example of 56 bit your router would pick the next 8 bit and each device would choose the remaining 64 bit.
To make this work with dynamic DNS updates, edit the configuratin and change ipv6prefixlen to the prefix length your ISP gives you (e.g. 56).
Then make sure that the host for which you want to update the DNS record has a predictable IPv6 suffix.
For example if your IP address happens to be 2001:db8:0123:4567:8901:2345:6789:0123 right now, the last 128-56=72 bits should never change (67:8901:2345:6789:0123))
Then add zeroes to the front of the suffix to make it a valid IPv6 address (0::67:8901:2345:6789:0123 in this example) and set it as the ipv6suffix.
If your router sends an IPv6 address in the URL but you do not want to update the corresponding AAAA DNS record, set ipv6prefixlen to 0.
This will cause dyndnsd to ignore the update for IPv6.
curl command illustrating the URL syntax:
curl --verbose 'https://[::1]:9841/update?user=bob&pass=123456&ipv4=1.2.3.4&ipv6=1::2'You should use a reverse proxy server like Nginx for TLS so that passwords are encrypted while they are transmitted over the internet.
Important
This is one of my first Rust projects so the code will not look very idiomatic. If you have any suggestions for improvements, please do not hesitate to create an issue or even a PR! 🖤
If you would like to see any of the following TODO items implemented, please file an issue so I know that it is important to someone.
- Listen on more than one IP address
- Package in Nixpkgs
- Test on platforms other than
x86_64-linux - Use systemd socket activation for lower resource usage
- Support HTTP basic auth
- Improve documentation
- Add some simpler tests in Rust in addition to the NixOS test
- Make use of the
ipv6lanprefixsent by FRITZ!Boxes - Add reverse DNS records
- Fix the problem where changing the domains in the config file does not immediately update the domains
The license is the GNU AGPLv3 (AGPL-3.0-only).