We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
默认配置无修改编译启动失败,大佬帮忙看下怎么回事,无法挂载 [ 1.527956] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 1.543926] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA [ 1.555194] dw-apb-uart fe660000.serial: forbid DMA for kernel console [ 1.555832] Waiting for root device PARTUUID=5452574f-02... [ 1.681195] mmc1: new HS200 MMC card at address 0001 [ 1.682212] mmcblk1: mmc1:0001 SC6311 29.1 GiB [ 1.683619] mmcblk1: p1 p2 [ 1.684318] mmcblk1boot0: mmc1:0001 SC6311 4.00 MiB [ 1.685560] mmcblk1boot1: mmc1:0001 SC6311 4.00 MiB [ 1.686623] mmcblk1rpmb: mmc1:0001 SC6311 4.00 MiB, chardev (248:0) [ 1.701091] F2FS-fs (mmcblk1p2): Magic Mismatch, valid(0xf2f52010) - read(0xeb00) [ 1.701762] F2FS-fs (mmcblk1p2): Can't find valid F2FS filesystem in 1th superblock [ 1.702596] F2FS-fs (mmcblk1p2): Magic Mismatch, valid(0xf2f52010) - read(0x0) [ 1.703233] F2FS-fs (mmcblk1p2): Can't find valid F2FS filesystem in 2th superblock [ 1.704352] F2FS-fs (mmcblk1p2): Magic Mismatch, valid(0xf2f52010) - read(0xeb00) [ 1.705013] F2FS-fs (mmcblk1p2): Can't find valid F2FS filesystem in 1th superblock [ 1.705837] F2FS-fs (mmcblk1p2): Magic Mismatch, valid(0xf2f52010) - read(0x0) [ 1.706474] F2FS-fs (mmcblk1p2): Can't find valid F2FS filesystem in 2th superblock [ 1.707177] List of all partitions: [ 1.707500] b300 30539776 mmcblk1 [ 1.707506] driver: mmcblk [ 1.708125] b301 32768 mmcblk1p1 5452574f-01 [ 1.708132] [ 1.708731] b302 962560 mmcblk1p2 5452574f-02 [ 1.708736] [ 1.709338] b320 4096 mmcblk1boot0 [ 1.709342] (driver?) [ 1.709941] b340 4096 mmcblk1boot1 [ 1.709945] (driver?) [ 1.710543] No filesystem could mount root, tried: [ 1.710545] squashfs [ 1.710973] f2fs [ 1.711176] [ 1.711481] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) [ 1.712220] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.41 #0 [ 1.712741] Hardware name: EmbedFire LubanCat 2N (DT) [ 1.713185] Call trace: [ 1.713403] dump_backtrace.part.0+0xc0/0xd0 [ 1.713790] show_stack+0x18/0x30 [ 1.714087] dump_stack_lvl+0x64/0x80 [ 1.714417] dump_stack+0x18/0x34 [ 1.714713] panic+0x154/0x324 [ 1.714989] mount_block_root+0x214/0x230 [ 1.715348] mount_root+0x1cc/0x1ec [ 1.715659] prepare_namespace+0x124/0x160 [ 1.716023] kernel_init_freeable+0x260/0x288 [ 1.716409] kernel_init+0x24/0x130 [ 1.716721] ret_from_fork+0x10/0x20 [ 1.717042] SMP: stopping secondary CPUs [ 1.717393] Kernel Offset: disabled [ 1.717702] CPU features: 0x00000,000400a4,6200700b [ 1.718131] Memory Limit: none [ 1.718406] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) ]
The text was updated successfully, but these errors were encountered:
刷sq,不要刷ext4.。
Sorry, something went wrong.
No branches or pull requests
默认配置无修改编译启动失败,大佬帮忙看下怎么回事,无法挂载
[ 1.527956] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 1.543926] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
[ 1.555194] dw-apb-uart fe660000.serial: forbid DMA for kernel console
[ 1.555832] Waiting for root device PARTUUID=5452574f-02...
[ 1.681195] mmc1: new HS200 MMC card at address 0001
[ 1.682212] mmcblk1: mmc1:0001 SC6311 29.1 GiB
[ 1.683619] mmcblk1: p1 p2
[ 1.684318] mmcblk1boot0: mmc1:0001 SC6311 4.00 MiB
[ 1.685560] mmcblk1boot1: mmc1:0001 SC6311 4.00 MiB
[ 1.686623] mmcblk1rpmb: mmc1:0001 SC6311 4.00 MiB, chardev (248:0)
[ 1.701091] F2FS-fs (mmcblk1p2): Magic Mismatch, valid(0xf2f52010) - read(0xeb00)
[ 1.701762] F2FS-fs (mmcblk1p2): Can't find valid F2FS filesystem in 1th superblock
[ 1.702596] F2FS-fs (mmcblk1p2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 1.703233] F2FS-fs (mmcblk1p2): Can't find valid F2FS filesystem in 2th superblock
[ 1.704352] F2FS-fs (mmcblk1p2): Magic Mismatch, valid(0xf2f52010) - read(0xeb00)
[ 1.705013] F2FS-fs (mmcblk1p2): Can't find valid F2FS filesystem in 1th superblock
[ 1.705837] F2FS-fs (mmcblk1p2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
[ 1.706474] F2FS-fs (mmcblk1p2): Can't find valid F2FS filesystem in 2th superblock
[ 1.707177] List of all partitions:
[ 1.707500] b300 30539776 mmcblk1
[ 1.707506] driver: mmcblk
[ 1.708125] b301 32768 mmcblk1p1 5452574f-01
[ 1.708132]
[ 1.708731] b302 962560 mmcblk1p2 5452574f-02
[ 1.708736]
[ 1.709338] b320 4096 mmcblk1boot0
[ 1.709342] (driver?)
[ 1.709941] b340 4096 mmcblk1boot1
[ 1.709945] (driver?)
[ 1.710543] No filesystem could mount root, tried:
[ 1.710545] squashfs
[ 1.710973] f2fs
[ 1.711176]
[ 1.711481] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
[ 1.712220] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.41 #0
[ 1.712741] Hardware name: EmbedFire LubanCat 2N (DT)
[ 1.713185] Call trace:
[ 1.713403] dump_backtrace.part.0+0xc0/0xd0
[ 1.713790] show_stack+0x18/0x30
[ 1.714087] dump_stack_lvl+0x64/0x80
[ 1.714417] dump_stack+0x18/0x34
[ 1.714713] panic+0x154/0x324
[ 1.714989] mount_block_root+0x214/0x230
[ 1.715348] mount_root+0x1cc/0x1ec
[ 1.715659] prepare_namespace+0x124/0x160
[ 1.716023] kernel_init_freeable+0x260/0x288
[ 1.716409] kernel_init+0x24/0x130
[ 1.716721] ret_from_fork+0x10/0x20
[ 1.717042] SMP: stopping secondary CPUs
[ 1.717393] Kernel Offset: disabled
[ 1.717702] CPU features: 0x00000,000400a4,6200700b
[ 1.718131] Memory Limit: none
[ 1.718406] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) ]
The text was updated successfully, but these errors were encountered: