-
-
Notifications
You must be signed in to change notification settings - Fork 0
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Compatibility issues #7
Comments
Wicher 508iI've had a report that the Wicher is blocking the autoconfig process on the relocator card from happening. This would make sense when FastRAM is in use as it uses the entire 8MB Zorro II space and a few extra spaces. But even with that disabled the autoconfig process does not happen. I don't have one of these boards so I don't know the process it takes or how to resolve this. |
SukkoPera's 8MB FastRAM ExpansionThis FastRAM expansion basically consumes the entire autoconfig process, blocking anything else from using it. As a workaround you can put this RAM board below the relocator, then when using the motherboard ROM the FastRAM is disabled. But when booting from a flash ROM the RAM is available. A "fix" may be to add a shim board between the CPU and the RAM board and add a virtual CFGIN/CFGOUT by trapping / controlling AS to each board. |
Amiga 2000 rev 6
The report is likely due to another issue as other rev 6 owners have reported that it works fine. |
This issue is to track compatibility issues with other hardware, sub-issues will likely be created to work on solving any.
The text was updated successfully, but these errors were encountered: