BoardConfig.mk

# Copyright (C) 2013-2016, The CyanogenMod Project
# Copyright (C) 2017, The LineageOS Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#
# This file sets variables that control the way modules are built
# thorughout the system. It should not be used to conditionally
# disable makefiles (the proper mechanism to control what gets
# included in a build is to use PRODUCT_PACKAGES in a product
# definition file).
#


TARGET_OTA_ASSERT_DEVICE := z2,Z2,z2plus,z2_plus

PLATFORM_PATH := device/zuk/z2_plus

TARGET_SPECIFIC_HEADER_PATH := $(PLATFORM_PATH)/include

BOARD_VENDOR := zuk

# Use Snapdragon LLVM, if available
TARGET_USE_SDCLANG := true

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := msm8996
TARGET_NO_BOOTLOADER := true

# Platform
TARGET_BOARD_PLATFORM := msm8996
TARGET_BOARD_PLATFORM_GPU := qcom-adreno530

# Properties
TARGET_SYSTEM_PROP += $(PLATFORM_PATH)/system.prop

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := kryo

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a53

ENABLE_CPUSETS := true

TARGET_USES_64_BIT_BINDER := true

# Kernel
BOARD_KERNEL_CMDLINE := androidboot.hardware=qcom ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=16M@0-0xffffffff
BOARD_KERNEL_BASE := 0x80000000
BOARD_KERNEL_PAGESIZE := 4096
BOARD_KERNEL_TAGS_OFFSET := 0x00000100
BOARD_RAMDISK_OFFSET     := 0x01000000
BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
TARGET_KERNEL_APPEND_DTB := true
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_HEADER_ARCH := arm64
TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-
TARGET_KERNEL_CONFIG := lineageos_z2_plus_defconfig
TARGET_KERNEL_SOURCE := kernel/zuk/msm8996

# QCOM hardware
BOARD_USES_QCOM_HARDWARE := true

# ANT+
BOARD_ANT_WIRELESS_DEVICE := "qualcomm-uart"

# Audio
AUDIO_USE_LL_AS_PRIMARY_OUTPUT := true
AUDIO_FEATURE_ENABLED_ACDB_LICENSE := true
AUDIO_FEATURE_ENABLED_ANC_HEADSET := true
AUDIO_FEATURE_ENABLED_AUDIOSPHERE := true
AUDIO_FEATURE_ENABLED_COMPRESS_VOIP := true
AUDIO_FEATURE_ENABLED_DEV_ARBI := true
AUDIO_FEATURE_ENABLED_EXTN_FORMATS := true
AUDIO_FEATURE_ENABLED_FLAC_OFFLOAD := true
AUDIO_FEATURE_ENABLED_FLUENCE := true
AUDIO_FEATURE_ENABLED_HFP := true
AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
AUDIO_FEATURE_ENABLED_NT_PAUSE_TIMEOUT := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD_24 := true
AUDIO_FEATURE_ENABLED_PROXY_DEVICE := true
AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
AUDIO_FEATURE_ENABLED_SPKR_PROTECTION := true
BOARD_USES_ALSA_AUDIO := true
USE_CUSTOM_AUDIO_POLICY := 1

# Bluetooth
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(PLATFORM_PATH)/bluetooth
BOARD_HAS_QCA_BT_ROME := true
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
QCOM_BT_USE_BTNV := true
QCOM_BT_USE_SMD_TTY := true

# Camera
BOARD_QTI_CAMERA_32BIT_ONLY := true
USE_DEVICE_SPECIFIC_CAMERA := true
TARGET_CAMERASERVICE_CLOSES_NATIVE_HANDLES := true

# Charger
BOARD_CHARGER_ENABLE_SUSPEND := true

# CM Hardware
BOARD_HARDWARE_CLASS += $(PLATFORM_PATH)/cmhw
TARGET_TAP_TO_WAKE_NODE := "/sys/devices/virtual/touch/tp_dev/gesture_on"
BOARD_USES_CYANOGEN_HARDWARE := true
BOARD_HARDWARE_CLASS += \
    hardware/cyanogen/cmhw

# CNE and DPM
TARGET_LDPRELOAD := libNimsWrap.so
BOARD_USES_QCNE := true

# Crypto
TARGET_HW_DISK_ENCRYPTION := true

# Display
BOARD_USES_ADRENO := true
TARGET_CONTINUOUS_SPLASH_ENABLED := true
TARGET_USES_C2D_COMPOSITION := true
TARGET_USES_ION := true
TARGET_USES_OVERLAY := true
USE_OPENGL_RENDERER := true
MAX_EGL_CACHE_KEY_SIZE := 12*1024
MAX_EGL_CACHE_SIZE := 2048*1024
OVERRIDE_RS_DRIVER:= libRSDriver_adreno.so
MAX_VIRTUAL_DISPLAY_DIMENSION := 4096
TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true
VSYNC_EVENT_PHASE_OFFSET_NS := 2000000
SF_VSYNC_EVENT_PHASE_OFFSET_NS := 6000000

# Enable dexpreopt to speed boot time
# WITH_DEXPREOPT := true

# Init
TARGET_INIT_VENDOR_LIB := libinit_z2_plus
TARGET_RECOVERY_DEVICE_MODULES := libinit_z2_plus
TARGET_PLATFORM_DEVICE_BASE := /devices/soc/

# Keystore
TARGET_PROVIDES_KEYMASTER := true

# Lights
TARGET_PROVIDES_LIBLIGHT := true

# Media
TARGET_USES_MEDIA_EXTENSIONS := true

# Partitions
BOARD_BOOTIMAGE_PARTITION_SIZE := 67108864
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3154116608
BOARD_USERDATAIMAGE_PARTITION_SIZE := 57436708864
BOARD_FLASH_BLOCK_SIZE := 262144

# QCOM Power
TARGET_POWERHAL_VARIANT := qcom

# RIL
TARGET_RIL_VARIANT := caf
SIM_COUNT := 2

# Recovery
TARGET_RECOVERY_FSTAB := $(PLATFORM_PATH)/rootdir/etc/fstab.qcom
TARGET_RECOVERY_UI_LIB := librecovery_ui_msm
TARGET_RECOVERY_UPDATER_LIBS := librecovery_updater_msm
TARGET_RELEASETOOLS_EXTENSIONS := device/qcom/common
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# SELinux
include device/qcom/sepolicy/sepolicy.mk

BOARD_SEPOLICY_DIRS += $(PLATFORM_PATH)/sepolicy

# Sensors
USE_SENSOR_MULTI_HAL := true

# Timeservice
BOARD_USES_QC_TIME_SERVICES := true

# Wifi
BOARD_HAS_QCOM_WLAN := true
BOARD_HAS_QCOM_WLAN_SDK := true
BOARD_WLAN_DEVICE := qcwcn
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
HOSTAPD_VERSION := VER_0_8_X
WIFI_DRIVER_FW_PATH_AP := "ap"
WIFI_DRIVER_FW_PATH_STA := "sta"
WIFI_DRIVER_FW_PATH_P2P := "p2p"
WIFI_DRIVER_MODULE_PATH := "/system/lib/modules/wlan.ko"
WIFI_DRIVER_MODULE_NAME := "wlan"
WPA_SUPPLICANT_VERSION := VER_0_8_X

# inherit from the proprietary version
-include vendor/zuk/z2_plus/BoardConfigVendor.mk