info.md

Configuration:

In Home Assistant:

1. Enter configuration menu
2. Select "Integrations"
3. Click the "+" in the bottom right
4. Choose "Lightwave Smart"
5. Enter username and password
6. This should automatically find all your devices

Usage:

Once configured this should then automatically add all switches, lights, thermostats, blinds/covers, sensors and energy monitors that are configured in your Lightwave app. If you add a new device you will need to restart Home Assistant, or remove and re-add the integration.

Various sensor entities (including power consumption) and controls for the button lock and status LED are exposed within the corresponding entities.

All other attributes reported by the Lightwave devices are exposed with the names lwrf_*. These are all read-only.

For gen2 devices, the brightness can be set without turning the light on using lightwave_smart.set_brightness.

Firmware 5+ devices generate lightwave_smart.click events when the buttons are pressed. The "code" returned is the type of click:

Code	Hex	Meaning
257	101	Up button single press
258	102	Up button double press
259	103	Up button triple press
260	104	Up button quad press
261+		(and so on - I believe up to 20x click is supported)
512	200	Up button press and hold
768	300	Up button release after long press
4353	1101	Down button single press
4354	1102	Down button double press
4355	1103	Down button triple press
4356	1104	Down button quad press
4357+		(and so on)
4608	1200	Down button press and hold
4864	1300	Down button release after long press

For sockets the codes are the "up button" versions.

There are further service calls:

lightwave_smart.reconnect: Force a reconnect to the Lightwave servers (only for non-public API, has no effect on public API) lightwave_smart.whdelete: Delete a webhook registration (use this if you get "Received message for unregistered webhook" log messages) lightwave_smart.update_states: Force a read of all states of devices