Skip to content

Latest commit

 

History

History
32 lines (22 loc) · 1.46 KB

README.md

File metadata and controls

32 lines (22 loc) · 1.46 KB
Raw

MPPT charge controller with HS load switch and CAN

Development Stage Prototype built and tested, development ongoing (some issues might still be open).

MPPT 2420 HC

Schematic: PDF file

Bill of Materials: CSV file or interactive HTML BOM

Firmware repository: LibreSolar/charge-controller-firmware

This charge controller design is the replacement for the MPPT 2420 LC. We are also working on an integration of MPPT control algorithms for wind turbines.

Features

  • Solar input terminal
    • Max. 80V (100V MOSFETs used)
    • DC/DC converter inductor current max. 20A
  • Battery output terminal
    • 10 V - 32 V (supporting 12 V and 24 V battery systems)
    • Max. current: 20A (limited by inductor current)
  • Load terminal: 20A
  • New STM32G431 ARM MCU with advanced digital power conversion features
  • Expandable via Olimex Universal Extension Connector (UEXT)
  • Two bi-color (red/green) LEDs for status indication. Additional user interface can be included in separate PCB in front panel housing and connected via UEXT
  • CAN interface via RJ45 connectors

Mechanical design

  • TO-220 MOSFETs can be screwed to large heat sink at the back
  • Plastic cover under development