(Hardware Issue?) Cannot launch server xi_ files

[unlmtd216]

Hey all. I just installed AirSkyBoat and followed all instructions but when I attempt to launch the 4 server exes (xi_connect etc) a window opens up and immediately closes. When I check log folder, the 4 log files are blank. I have allowed the ports listed in network.lua through windows firewall and forwarded them on router but still no luck. Can anyone please assist with this?

[zach2good]

Hi there,

ASB is their own project, with significantly different code to us at this point. You should go to them for support: https://github.com/AirSkyBoat/AirSkyBoat

If you can reproduce your issue using our exact code, using our exact quick start guide (https://github.com/LandSandBoat/server/wiki/Quick-Start-Guide), then we'll be able to help you.

[cocosolos]

What about Start-Process xi_connect -NoNewWindow?

[Mortalelite]

What OS are you running? Windows, Linux, Mac? Also did you follow this https://github.com/LandSandBoat/server/wiki/Quick-Start-Guide

In the server folder where installed all the files. Toward the bottom should see xi_connect, xi_map, xi_search, xi_world. Does any them launch with a error in the logs?

Also make sure no Anti-Virus software is conflict. Myself I only run windows defender. So if you using something else beyond that it could maybe conflict.

[claywar]

Going to need to get the console output for the error you're having. My assumption is its something like not having copied over your settings files (as required, and mentioned in the quick start). You're going to want to open a console window on its own first, and then run the server. Then copy the output (error) logged.

[BKunlmtd]

Tried it with a better quality hard drive with fresh win 10 install and I finally got the 4 server exes up and running! :) time to go on to the next step. Thank you very much guys.