Setup
Setup information for hardware and software
Download the Arduino IDE here (for Win64)
All Arduino Libraries are held here, or accessed via Headfixed_5sipper (main) >> Setup >> Arduino_Libraries
Download all Arduino libraries (as .ZIP files) and upload to Arduino IDE via Sketch (top-left corner) >> Include Library >> Add .ZIP Library
Load the functions from Arduino Code into your Arduino IDE.
Descriptions of functions:
- Button.ino >> checkbuttons() | Allows adjustment of spout in boot-up while checking buttons B & C, runtime updated on OLED screen.
- Dispense.ino >> dispense(int selection) | Dispenses appropriate amount of solution through the spout selection. Volume is pre-set requires editing: switch statement and global variable volume should be implemented
- Display.ino >> UpdateDisplay() | Updates OLED display
- Retract_Extend.ino >> retract() - allows retraction of the spout via servo || extend() - allows extension of the spout via servo -- implemented to go to position pos (defined at Arduino boot) requires editing: closed-loop with lickometer to adjust if over-extended/not far enough
- Rotate.ino >> spoutPosition(int num) | Uses _num _to define which spout is being used, and rotates the spouts such that appropriate spout is in front of mouse.
- Timeout.ino >> timeout(int low, int high) | Uses a a timeout of random duration between low and high seconds to prevent continuous trials
- Tone.ino >> playtone(int frequency, int duration) | Plays a tone of frequency pitch for duration time || noise() | Plays a random set of tones (20ms each) for 1 second (50 random tones)
- Wash.ino >> dispenses through all 5 ports, to be implemented with EtOH and H2O
- customDelay.ino >> customDelay(int milliseconds) | does nothing over _milliseconds _of time and updates display after delay.
