Skip to content

Latest commit

 

History

History
47 lines (43 loc) · 2.26 KB

BoM.md

File metadata and controls

47 lines (43 loc) · 2.26 KB
layout title
page
What to buy

Electronics (order one per feeder):

Sparkfun

Item Quantity URL
Arduino Pro 1 https://www.sparkfun.com/products/10915
Stackable headers (Arduino Pro) 1 https://www.sparkfun.com/products/10007
Stackable headers (data logger) 1 https://www.sparkfun.com/products/11417
Male headers (motor shield) 1 https://www.sparkfun.com/products/116
Photointerrupter (GP1A57HRJ00F) 1 https://www.sparkfun.com/products/9299
Photointerrupter breakout board 1 https://www.sparkfun.com/products/9322

Adafruit

Item Quantity URL
FTDI Friend + extras - v.10 1 https://www.adafruit.com/product/284
Datalogging shield 1 https://www.adafruit.com/products/1141
SD card 1 https://www.adafruit.com/products/102
Stepper motor 1 https://www.adafruit.com/products/858
ON/OFF switch 1 https://www.adafruit.com/products/916
Motor shield v2 1 https://www.adafruit.com/product/1438
Powerboost charger 1 https://www.adafruit.com/products/2465
3-pin JST connector 1 https://www.adafruit.com/products/1663
2-pin JST connector 3 https://www.adafruit.com/products/2880
3.7V 4400mAh LiPo 1 https://www.adafruit.com/products/354
Note an alternative battery supplier for shipments outside of the US: http://www.all-battery.com/Li-Ion186503.7V4400mAhBattery-31000.aspx)

Hardware and wires:

Item Quantity URL
Jumper wires 1 https://www.sparkfun.com/products/12796
4.7K ohm resistors 1 https://www.sparkfun.com/products/10969
Pan head phillips sheet metal screw, No 6 size, 1/4" length 2 http://www.mcmaster.com/#90184a120/=14ao2aq
Pan head phillips sheet metal screw, No 2 size, 1/4" length 2 http://www.mcmaster.com/#90184a050/=14ao1x7
Nylon 100 degree flat head slotted machine screw, 4-40 thread, 1" length 2 http://www.mcmaster.com/#90241a253/=14ao2m
Nylon hex nut, 4-40 thread size 2 http://www.mcmaster.com/#94812a200/=14ao32r

Required tools

  • Soldering iron + solder
  • Heat gun (for heat shrink, and also making small adjustments to 3D prints)
  • Screwdrivers
  • Wire strippers
  • Small metal file (useful for touching up 3D prints)