ORVIBO CR11S8UZ mixpad with 8-buttons

[SAOPP]

Hey!

Guys, just wanted to ask, 'coz didn't found any comments about this... ORVIBO CR11S8UZ [https://www.zigbee2mqtt.io/devices/CR11S8UZ.html] this switch got 8-buttons, two of this is double buttons (5-6 and 7-8). Latest two double button is not transmit any events in z2m, this is a qustion, why it not possible at all?

Thanks.

[Skydev0h]

Maybe a lil late, but for lower buttons to transmit codes, the upper buttons need to be bound to devices in supported mode (e.g. Light with brightness control or Curtain with movement control).

I did some research on the button a year ago, it may be useful:

Cluster: 0x0017
Profile: 0x0104
Endpoint: 1 <-> 1

[ 03 ] [ 0b ]
[ 07 ] [ 0f ]

Button 1 : Scene 1
>> 0x02 03 00 00
<< 0x04 00 03 00 00
>> 0x04 03 00 00 [00 00] [03]
                 GroupID SceneID

Button 1 : Scene 2
>> 0x02 03 00 00
<< 0x04 00 03 00 00
>> 0x04 03 00 00 [00 00] [04]

Button 2 : Scene 2
>> 0x02 0b 00 00
<< 0x04 00 0b 00 00
>> 0x04 0b 00 00 [00 00] [04]

>> 0x04 ...
                                                           ENDPOINT
					   [Button] [ Target device MAC   ] vv PROFL
Button 1 : Relay 4 : ON/OFF    03 00 00 5a e8 04 10 00 4b 12 00 01 04 01 06 00 01 02  dst: ecff
Button 1 : Relay 4 : ON        03 00 00 5a e8 04 10 00 4b 12 00 01 04 01 06 00 01 01
Button 1 : Relay 4 : OFF       03 00 00 5a e8 04 10 00 4b 12 00 01 04 01 06 00 01 00
Button 1 : Relay 5 : OFF       03 00 00 5a e8 04 10 00 4b 12 00 02 04 01 06 00 01 00
Button 1 : Relay 6 : OFF       03 00 00 5a e8 04 10 00 4b 12 00 03 04 01 06 00 01 00
Button 1 : Curtain 1 : Open    03 00 00 a0 87 56 13 00 4b 12 00 01 04 01 02 01 01 00  dst: ec59
Button 1 : Curtain 1 : Close   03 00 00 a0 87 56 13 00 4b 12 00 01 04 01 02 01 01 01
Button 1 : Curtain 1 : Stop    03 00 00 a0 87 56 13 00 4b 12 00 01 04 01 02 01 01 02
Button 1 : Curtain 2 : Stop    03 00 00 45 e6 04 10 00 4b 12 00 01 04 01 02 01 01 02  dst: 6c27
                                                                         CLUST ^^ CMD
																		       LEN?

ZbSend {"Device": "0xDAAC", "Send": "0017!02/030000"}
ZbSend {"Device": "0xDAAC", "Send": "0017!00/03000052bf51feffea359001040106000100"}
                                                                         ****

ZbSend {"Device": "0xDAAC", "Send": "0017!02/030000"}
ZbSend {"Device": "0xDAAC", "Send": "0017!00/030000ffffffffffffffff01040102010102"}

ZbSend {"Device": "0xDAAC", "Send": "0017!02/0b0000"}
ZbSend {"Device": "0xDAAC", "Send": "0017!00/0b0000306f0afeff504b8001040102010102"}

ZbSend {"Device": "0xDAAC", "Send": "0017!02/0b0000"}
ZbSend {"Device": "0xDAAC", "Send": "0017!00/0b0000306f0afeff504b8001040100000102"}
                                                                         ****

Also, I am not sure, whether the button will correctly send the codes if bound to 0x0000, as required for Coordinator to receive button presses directly. If I recall correctly I had an issue with that.