Schneider S520619 Thermostat

[ChrisLou14]

Hello, I have buy a schneider thermostat but unfortunately it was not supported by Z2m.
So I try to follow the instructions to include the device and I have many difficulties .
The device was include to my z2m and I can see it on the z2m interface.
I have e few data read (occupancy, link quality, temperature) but I want to write an read occupiedHeatingSetpoint (endpoint 1 binding havthermostat.
I can read and write this item from the console dev but I can't collect it by Z2m.
Can you help me ?

(sorry for my bad English I'm french)

[leperroy]

I'm using as well this device. Will be happy if Z2M would support it.

[pcurt]

Hello, I'm on it !

[pcurt]

I have open a PR Koenkk/zigbee-herdsman-converters#8452 that adds the support.
You can already use it using an external converter with this content

const {} = require('zigbee-herdsman-converters/lib/modernExtend');
const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const ota = require('zigbee-herdsman-converters/lib/ota');
const tuya = require('zigbee-herdsman-converters/lib/tuya');
const {} = require('zigbee-herdsman-converters/lib/tuya');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const e = exposes.presets;
const ea = exposes.access;


const definition = {
    zigbeeModel: ['S520619'],
    model: 'S520619',
    vendor: 'Schneider Electric',
    description: 'Wiser Odace Smart thermostat',
        fromZigbee: [fz.stelpro_thermostat, fz.metering, fz.schneider_pilot_mode, fz.wiser_device_info, fz.hvac_user_interface, fz.temperature, fz.occupancy],
        toZigbee: [
            tz.thermostat_occupied_heating_setpoint,
            tz.thermostat_system_mode,
            tz.thermostat_local_temperature,
            tz.thermostat_control_sequence_of_operation,
            tz.schneider_pilot_mode,
            tz.schneider_thermostat_keypad_lockout,
            tz.thermostat_temperature_display_mode,
        ],
        exposes: [
            e.binary('keypad_lockout', ea.STATE_SET, 'lock1', 'unlock').withDescription('Enables/disables physical input on the device'),
            e.enum('schneider_pilot_mode', ea.ALL, ['contactor', 'pilot']).withDescription('Controls piloting mode'),
            e
                .enum('temperature_display_mode', ea.ALL, ['celsius', 'fahrenheit'])
                .withDescription('The temperature format displayed on the thermostat screen'),
            e
                .climate()
                .withSetpoint('occupied_heating_setpoint', 4, 30, 0.5)
                .withLocalTemperature()
                .withSystemMode(['off', 'heat', 'cool'])
                .withPiHeatingDemand(),
            e.temperature(),
            e.occupancy(),
        ],
        configure: async (device, coordinatorEndpoint) => {
            const endpoint1 = device.getEndpoint(1);
            const endpoint2 = device.getEndpoint(2);
            const endpoint4 = device.getEndpoint(4);
            await reporting.bind(endpoint1, coordinatorEndpoint, ['hvacThermostat']);
            await reporting.thermostatPIHeatingDemand(endpoint1);
            await reporting.thermostatOccupiedHeatingSetpoint(endpoint1);
            await reporting.temperature(endpoint2);
            await endpoint1.read('hvacUserInterfaceCfg', ['keypadLockout', 'tempDisplayMode']);
            await reporting.bind(endpoint4, coordinatorEndpoint, ['msOccupancySensing']);
            await reporting.thermostatOccupancy(endpoint4);
        },
        options: [exposes.options.measurement_poll_interval()],
        onEvent: async (type, data, device, options) => {
            const endpoint = device.getEndpoint(1);
            console.log("PCURT")
            const poll = async () => {
                await endpoint.read('hvacThermostat', ['occupiedHeatingSetpoint']);
            };
            utils.onEventPoll(type, data, device, options, 'measurement', 20, poll);
         },
};

module.exports = definition;

[pcurt]

FYI : my PR has been merged and is integrated in dev branch
6905c10