How to update firmware for cc2652p on Linux?

[PrzemekSkw]

Hello, I try with web flasher on https://smlight.tech/flasher/#other_cc
but have progress 0% and nothing happen.
What is other way to update?
Regards.

[srett]

I used https://github.com/JelmerT/cc2538-bsl

[PrzemekSkw]

I have archlinux laptop and when I push that button connecting device nothing happen.

[srett]

What does dmesg say?

[PrzemekSkw]

[13113.437330] wlp1s0: authenticate with b0:19:21:00:68:92
[13113.755828] wlp1s0: send auth to b0:19:21:00:68:92 (try 1/3)
[13113.762532] wlp1s0: authenticated
[13113.765754] wlp1s0: associate with b0:19:21:00:68:92 (try 1/3)
[13113.775493] wlp1s0: RX AssocResp from b0:19:21:00:68:92 (capab=0x1531 status=0 aid=1)
[13113.775964] wlp1s0: associated
[13113.864727] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b0:19:21:00:68:92
[13219.082397] usb 1-2: new full-speed USB device number 10 using xhci_hcd
[13219.236231] usb 1-2: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.63
[13219.236248] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[13219.236254] usb 1-2: Product: USB2.0-Serial
[13219.274558] ch341 1-2:1.0: ch341-uart converter detected
[13219.288501] usb 1-2: ch341-uart converter now attached to ttyUSB0

[srett]

That's looking good, IIRC it shows up as ttyACM normally and ttyUSB if you hold down the button while plugging in.

[PrzemekSkw]

I try also uniflash app on linux and find instructions to hold flash button and reset button, then relase reset and after 2sec resale flash button but that also don't work :/