Sonoff Zigbee Bridge Pro #17446
Replies: 4 comments 2 replies
-
I enabled zigbee-herdsman debug and got this in my log:
|
Beta Was this translation helpful? Give feedback.
-
A bit of tinkering with the network settings has made progress:
I am now opening the TCP socket
With a USB controller, the command for the network_key is GENERATE, this doesn't work for a remote adapter, but how do I know the network key should be? |
Beta Was this translation helpful? Give feedback.
-
As far as I know, Sonoff Zigbee Bridge Pro uses TI CC2652P chip on board. so it's strange to see that you are specifying the |
Beta Was this translation helpful? Give feedback.
-
I am currently trying to set up a Sonoff Zigbee-Bridge Pro in HA (to increase coordinators since I am already using a Zigbee-Bridge with ZHA) and all I am getting is a "502: Bad Gateway" when starting the addon.
This is my configuration.yaml:
My logs:
Maybe you can see an obvious mistake by reading the logs. I realised, that I am not mentioning a mqtt server and a base topic. Otherwise, I am confused that you are using the Please let me know what you guys think. |
Beta Was this translation helpful? Give feedback.
-
I am running HA on RPi4 and have made a successful installation with tasmotised Sonoff Zigbee Bridge pro under ZHA.
I needed to "upgrade" to Zigbee2mqtt to work with IKEA tradfri switches. So I loaded it as an add-on. I followed the instructions here: https://www.zigbee2mqtt.io/advanced/remote-adapter/connect_to_a_remote_sonoff_zbbridge.html
My configuration is:
When I start the add-on I get this in the log:
If I log in to the sonoff bridge and open the console, I can see that there is a successful TCP connection from HA about every three seconds.
But nothing in the web interface and nothing in MQTT explorer. Any suggestions? Thanks.
Beta Was this translation helpful? Give feedback.
All reactions