introduction | detailed information | Configure & Build | API description | Custom log formatting
+Most of the API that you need for using g3log is described in this readme. For more API documentation and examples please continue to read the API readme. Examples of what you will find here are:
+LOG calls can follow streaming LOG(INFO) << "some text" or printf-like syntax LOGF(WARNING, "some number %d", 123);
Conditional logging is made with LOG_IF(INFO, <boolean-expression>) << " some text" or LOGF_IF(WARNING, <boolean-expression>) << " some text". Only if the expressions evaluates to true will the logging take place.
Example:
+LOG_IF(INFO, 1 != 200) << " some text"; or LOG_IF(FATAL, SomeFunctionCall()) << " some text";
A call using FATAL logging level, such as the LOG_IF(FATAL,...) example above, will after logging the message at FATALlevel also kill the process. It is essentially the same as a CHECK(<boolea-expression>) << ... with the difference that the CHECK(<boolean-expression) triggers when the expression evaluates to false.
The contract API follows closely the logging API with CHECK(<boolean-expression>) << ... for streaming or (*) CHECKF(<boolean-expression>, ...); for printf-style.
If the <boolean-expression> evaluates to false then the the message for the failed contract will be logged in FIFO order with previously made messages. The process will then shut down after the message is sent to the sinks and the sinks have dealt with the fatal contract message.
(* * CHECK_F(<boolean-expression>, ...); was the the previous API for printf-like CHECK. It is still kept for backwards compatability but is exactly the same as CHECKF *)
The default logging levels are DEBUG, INFO, WARNING and FATAL (see FATAL usage above). The logging levels are defined in loglevels.hpp.
For some windows framework there is a clash with the DEBUG logging level. One of the CMake Build options can be used to then change offending default level from DEBUG TO DBUG.
**CMake option: (default OFF) ** cmake -DCHANGE_G3LOG_DEBUG_TO_DBUG=ON ..
### disable/enabled levels at runtime + Logging levels can be disabled at runtime. The logic for this happens in + loglevels.hpp, loglevels.cpp and g3log.hpp.
+There is a cmake option to enable the dynamic enable/disable of levels.
+ When the option is enabled there will be a slight runtime overhead for each LOG call when the enable/disable status is checked. For most intent and purposes this runtime overhead is negligable.
There is no runtime overhead for internally checking if a level is enabled//disabled if the cmake option is turned off. If the dynamic logging cmake option is turned off then all logging levels are enabled.
+CMake option: (default OFF) cmake -DUSE_DYNAMIC_LOGGING_LEVELS=ON ..
### custom logging levels + Custom logging levels can be created and used. When defining a custom logging level you set the value for it as well as the text for it. You can re-use values for other levels such as INFO, WARNING etc or have your own values. Any value with equal or higher value than the FATAL value will be considered a FATAL logging level.
+To keep in mind when adding your own custom levels.
+1. If the cmake option G3_DYNAMIC_LOGGING is enabled then you must use g3::only_change_at_initialization::addLogLevel(...) to give g3log a record of your logging level and if it is an enabled or disbled logging level.
+1. If the cmake G3_DYNAMIC_LOGGING is turned OFF, then giving g3log a record of your logging level with 'addLogLevel(...) is not needed since no "disbled/enabled" check will happen - all logging levels will be considered enabled.
Example:
+ ```cpp
+ // In CustomLoggingLevels.hpp
+ #include
// all values with a + 1 higher than their closest equivalet + // they could really have the same value as well.
+const LEVELS FYI {DEBUG.value + 1, {"For Your Information"}}; + const LEVELS CUSTOM {INFO.value + 1, {"CUSTOM"}}; + const LEVELS SEVERE {WARNING.value +1, {"SEVERE"}}; + const LEVELS DEADLY {FATAL.value + 1, {"DEADLY"}}; + ```
+More examples can be viwed in the unit tests.
+The default sink for g3log is the one as used in g2log. It is a simple file sink with a limited API. The details for the default file sink can be found in filesink.hpp, filesink.cpp, filesinkhelper.ipp
+More sinks can be found at g3sinks (log rotate, log rotate with filtering on levels)
+A logging sink is not required to be a subclass of a specific type. The only requirement of a logging sink is that it can receive a logging message of
+Sink creation is defined in logworker.hpp and used in logworker.cpp. For in-depth knowlege regarding sink implementation details you can look at sinkhandle.hpp and sinkwrapper.hpp
+ std::unique_ptr<FileSinkHandle> addDefaultLogger(
+ const std::string& log_prefix
+ , const std::string& log_directory
+ , const std::string& default_id = "g3log");
+With the default id left as is (i.e. "g3log") a creation of the logger in the unit test "test_filechange" would look like this
+ const std::string directory = "./";
+ const std::string name = "(ReplaceLogFile)";
+ auto worker = g3::LogWorker::createLogWorker();
+ auto handle = worker->addDefaultLogger(name, directory);
+The resulting filename would be something like:
+ ./(ReplaceLogFile).g3log.20160217-001406.log
+The default log formatting look can be overriden by any sink.
+If the sink receiving function calls toString() then the default log formatting will be used.
+If the sink receiving function calls toString(&XFunc) then the XFuncwill be used instead (see LogMessage.h/cpp for code details if it is not clear). (XFunc is a place holder for your formatting function of choice).
The API for the function-ptr to pass in is
+std::string (*) (const LogMessage&)
+or for short as defined in LogMessage.h
using LogDetailsFunc = std::string (*) (const LogMessage&);
+Please seeAPI_custom_formatting.md
+The default file sink will flush each log entry at set intervals. The default buffer size for flushing is set to 100 entries. You can adjust this down to 1, or as high as makes sense for your system. Please see FileSink
+Even more flushing policies and log rotations can be found at g3sinks logrotate and LogRotateWithFilters.
+At shutdown all enqueued logs will be flushed to the sink.
+At a discovered fatal event (SIGSEGV et.al) all enqueued logs will be flushed to the sink.
A programmatically triggered abrupt process exit such as a call to exit(0) will of course not get the enqueued log entries flushed. Similary a bug that does not trigger a fatal signal but a process exit will also not get the enqueued log entries flushed. G3log can catch several fatal crashes and it deals well with RAII exits but magic is so far out of its' reach.
Example usage where a logrotate sink (g3sinks) is added. In the example it is shown how the logrotate API is called. The logrotate limit is changed from the default to instead be 10MB. The limit is changed by calling the sink handler which passes the function call through to the actual logrotate sink object.
+
+// main.cpp
+#include <g3log/g3log.hpp>
+#include <g3log/logworker.h>
+#include <g3sinks/LogRotate.h>
+#include <memory>
+
+int main(int argc, char**argv) {
+ using namespace g3;
+ std::unique_ptr<LogWorker> logworker{ LogWorker::createLogWorker() };
+ auto sinkHandle = logworker->addSink(std::make_unique<LogRotate>(),
+ &LogRotate::save);
+
+ // initialize the logger before it can receive LOG calls
+ initializeLogging(logworker.get());
+
+ // You can call in a thread safe manner public functions on the logrotate sink
+ // The call is asynchronously executed on your custom sink.
+ const int k10MBInBytes = 10 * 1024 * 1024;
+ std::future<void> received = sinkHandle->call(&LogRotate::setMaxLogSize, k10MBInBytes);
+
+ // Run the main part of the application. This can be anything of course, in this example
+ // we'll call it "RunApplication". Once this call exits we are in shutdown mode
+ RunApplication();
+
+ // If the LogWorker is initialized then at scope exit the g3::shutDownLogging() will be
+ // called automatically.
+ //
+ // This is important since it protects from LOG calls from static or other entities that will go out of
+ // scope at a later time.
+ //
+ // It can also be called manually if for some reason your setup is different then the one highlighted in
+ // this example
+ g3::shutDownLogging();
+}
+The default build uses a fixed size buffer for formatting messages. The size of this buffer is 2048 bytes. If an incoming message results in a formatted message that is greater than 2048 bytes, it will be bound to 2048 bytes and will have the string [...truncated...] appended to the end of the bound message. There are cases where one would like to dynamically change the size at runtime. For example, when debugging payloads for a server, it may be desirable to handle larger message sizes in order to examine the whole payload. Rather than forcing the developer to rebuild the server, dynamic message sizing could be used along with a config file which defines the message size at runtime.
This feature supported as a CMake option:
+CMake option: (default OFF) cmake -DUSE_G3_DYNAMIC_MAX_MESSAGE_SIZE=ON ..
The following is an example of changing the size for the message.
+ g3::only_change_at_initialization::setMaxMessageSize(10000);
+The default behaviour for G3log is to catch several fatal events before they force the process to exit. After catching a fatal event a stack dump is generated and all log entries, up to the point of the stack dump are together with the dump flushed to the sink(s).
+The default fatal handling on Linux deals with fatal signals. At the time of writing these signals were SIGABRT, SIGFPE, SIGILL, SIGSEGV, SIGTERM. The Linux fatal handling is handled in crashhandler.hpp and crashhandler_unix.cpp
A signal that commonly is associated with voluntarily process exit is SIGINT (ctrl + c) G3log does not deal with it.
The fatal signals can be disabled or changed/added .
+An example of a Linux stackdump as shown in the output from the fatal example g3log-FATAL-sigsegv. + ``` + * FATAL SIGNAL RECEIVED * + "Received fatal signal: SIGSEGV(11) PID: 6571
+***** SIGNAL SIGSEGV(11)
+
+******* STACKDUMP *******
+ stack dump [1] ./g3log-FATAL-sigsegv() [0x42a500]
+ stack dump [2] /lib/x86_64-linux-gnu/libpthread.so.0+0x10340 [0x7f83636d5340]
+
+ stack dump [3] ./g3log-FATAL-sigsegv : example_fatal::tryToKillWithAccessingIllegalPointer(std::unique_ptr<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::default_delete<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > > >)+0x119 [0x4107b9]
+ stack dump [4] ./g3log-FATAL-sigsegvmain+0xdec [0x40e51c]
+ stack dump [5] /lib/x86_64-linux-gnu/libc.so.6__libc_start_main+0xf5 [0x7f8363321ec5]
+ stack dump [6] ./g3log-FATAL-sigsegv() [0x40ffa2]
+
+Exiting after fatal event (FATAL_SIGNAL). Fatal type: SIGSEGV
+Log content flushed sucessfully to sink
+
+"
+g3log g3FileSink shutdown at: 16:33:18
+
+```
+By default the fatal signals are defined in https://github.com/KjellKod/g3log/tree/master/src/g3log.cpp as
+ SIGABRT
+ SIGFPE
+ SIGILL
+ SIGSEGV
+ SIGTERM
+ If you want to define your own set of fatal signals, override the default ones, then this can be done as shown in src/g3log/crashhandler.hpp
+ cpp
+ // Example when SIGTERM is skipped due to ZMQ usage
+ g3::overrideSetupSignals({ {SIGABRT, "SIGABRT"},
+ {SIGFPE, "SIGFPE"},
+ {SIGILL, "SIGILL"},
+ {SIGSEGV, "SIGSEGV"}});
You can define a custom call back function that will be called before the fatal signal handling re-emits the fatal signal. See src/g3log/g3log.hpp for details.
+ // Example of how to enforce important shutdown cleanup even in the event of a fatal crash:
+ g3::setFatalPreLoggingHook([]{ cleanup(); });
Fatal signal handling can be disabled with a CMake option: ENABLE_FATAL_SIGNALHANDLING. See Options.cmake for more details
If you are using g3log on a PID1 process then you absolutely should provide your own signal handling (ref: issue 269) as g3log re-emits the fatal signal after it has restored the previous signal handler for that signal. PID1 processed do not shutdown the process for a normal fatal signal so the choice to exit the PID1 process after such a signal must be taken by the coder - not by g3log.
+Windows fatal handling also deals with fatal signals just like Linux. In addition to fatal signals it also deals with unhandled exceptions, vectored exceptions. Windows fatal handling is handled in crashhandler.hpp, crashhandler_windows.cpp, stacktrace_windows.hpp, stacktrace_windows.cpp
+An example of a Windows stackdump as shown in the output from the fatal example g3log-FATAL-sigsegv.
+introduction | detailed information | Configure & Build | API description | Custom log formatting
+ + + + + + +introduction | detailed information | Configure & Build | API description | Custom log formatting
+The default file header can be customized in the default file sink in calling
+ FileSink::overrideLogHeader(std::string);
+The default log formatting is defined in LogMessage.hpp
static std::string DefaultLogDetailsToString(const LogMessage& msg);
+An "all details" log formatting function is also defined - this one also adds the "calling thread's ID"
+ static std::string FullLogDetailsToString(const LogMessage& msg);
+For convenience the Default sink has a function +for doing exactly this
+ void overrideLogDetails(LogMessage::LogDetailsFunc func);
+Example code for replacing the default log formatting for "full details" formatting (it adds thread ID)
+ auto worker = g3::LogWorker::createLogWorker();
+ auto handle= worker->addDefaultLogger(argv[0], path_to_log_file);
+ g3::initializeLogging(worker.get());
+ handle->call(&g3::FileSink::overrideLogDetails, &LogMessage::FullLogDetailsToString);
+See test_message.cpp for details and testing
+Example code for overloading the formatting of a custom sink. The log formatting function will be passed into the
+LogMessage::toString(...) this will override the default log formatting
Example
+namespace {
+ std::string MyCustomFormatting(const LogMessage& msg) {
+ ... how you want it ...
+ }
+ }
+
+ void MyCustomSink::ReceiveLogEntry(LogMessageMover message) {
+ std::string formatted = message.get().toString(&MyCustomFormatting) << std::flush;
+ }
+...
+...
+ auto worker = g3::LogWorker::createLogWorker();
+ auto sinkHandle = worker->addSink(std::make_unique<MyCustomSink>(),
+ &MyCustomSink::ReceiveLogMessage);
+ // ReceiveLogMessage(...) will used the custom formatting function "MyCustomFormatting(...)
+
+introduction | detailed information | Configure & Build | API description | Custom log formatting
+ + + + + + +