From 33b250acbfb57f495974e8b0ac1f0ad38f2d52a7 Mon Sep 17 00:00:00 2001 From: Hritik Vijay Date: Tue, 27 Dec 2022 20:04:18 +0530 Subject: [PATCH] add pytest and hritik's fork --- .gitattributes | 1 + .pylintrc | 623 +++++++++++++++++++++++++++++++++++++++++++++++++ README.rst | 148 +++--------- 3 files changed, 650 insertions(+), 122 deletions(-) create mode 100644 .gitattributes create mode 100644 .pylintrc diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 000000000..667553908 --- /dev/null +++ b/.gitattributes @@ -0,0 +1 @@ +README.rst merge=ours diff --git a/.pylintrc b/.pylintrc new file mode 100644 index 000000000..f5400214f --- /dev/null +++ b/.pylintrc @@ -0,0 +1,623 @@ +[MAIN] +django-settings-module=vulnerablecode.settings +disable= + C0114, # missing-module-docstring + C0115, # missing-class-docstring + C0116, # missing-function-docstring + +# Analyse import fallback blocks. This can be used to support both Python 2 and +# 3 compatible code, which means that the block might have code that exists +# only in one or another interpreter, leading to false positives when analysed. +analyse-fallback-blocks=no + +# Load and enable all available extensions. Use --list-extensions to see a list +# all available extensions. +#enable-all-extensions= + +# In error mode, messages with a category besides ERROR or FATAL are +# suppressed, and no reports are done by default. Error mode is compatible with +# disabling specific errors. +#errors-only= + +# Always return a 0 (non-error) status code, even if lint errors are found. +# This is primarily useful in continuous integration scripts. +#exit-zero= + +# A comma-separated list of package or module names from where C extensions may +# be loaded. Extensions are loading into the active Python interpreter and may +# run arbitrary code. +extension-pkg-allow-list= + +# A comma-separated list of package or module names from where C extensions may +# be loaded. Extensions are loading into the active Python interpreter and may +# run arbitrary code. (This is an alternative name to extension-pkg-allow-list +# for backward compatibility.) +extension-pkg-whitelist= + +# Return non-zero exit code if any of these messages/categories are detected, +# even if score is above --fail-under value. Syntax same as enable. Messages +# specified are enabled, while categories only check already-enabled messages. +fail-on= + +# Specify a score threshold under which the program will exit with error. +fail-under=10 + +# Interpret the stdin as a python script, whose filename needs to be passed as +# the module_or_package argument. +#from-stdin= + +# Files or directories to be skipped. They should be base names, not paths. +ignore=CVS + +# Add files or directories matching the regular expressions patterns to the +# ignore-list. The regex matches against paths and can be in Posix or Windows +# format. Because '\' represents the directory delimiter on Windows systems, it +# can't be used as an escape character. +ignore-paths= + +# Files or directories matching the regular expression patterns are skipped. +# The regex matches against base names, not paths. The default value ignores +# Emacs file locks +ignore-patterns=^\.# + +# List of module names for which member attributes should not be checked +# (useful for modules/projects where namespaces are manipulated during runtime +# and thus existing member attributes cannot be deduced by static analysis). It +# supports qualified module names, as well as Unix pattern matching. +ignored-modules= + +# Python code to execute, usually for sys.path manipulation such as +# pygtk.require(). +#init-hook= + +# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the +# number of processors available to use, and will cap the count on Windows to +# avoid hangs. +jobs=1 + +# Control the amount of potential inferred values when inferring a single +# object. This can help the performance when dealing with large functions or +# complex, nested conditions. +limit-inference-results=100 + +# List of plugins (as comma separated values of python module names) to load, +# usually to register additional checkers. +load-plugins=pylint_django + +# Pickle collected data for later comparisons. +persistent=yes + +# Minimum Python version to use for version dependent checks. Will default to +# the version used to run pylint. +py-version=3.8 + +# Discover python modules and packages in the file system subtree. +recursive=no + +# When enabled, pylint would attempt to guess common misconfiguration and emit +# user-friendly hints instead of false-positive error messages. +suggestion-mode=yes + +# Allow loading of arbitrary C extensions. Extensions are imported into the +# active Python interpreter and may run arbitrary code. +unsafe-load-any-extension=no + +# In verbose mode, extra non-checker-related info will be displayed. +#verbose= + + +[BASIC] + +# Naming style matching correct argument names. +argument-naming-style=snake_case + +# Regular expression matching correct argument names. Overrides argument- +# naming-style. If left empty, argument names will be checked with the set +# naming style. +#argument-rgx= + +# Naming style matching correct attribute names. +attr-naming-style=snake_case + +# Regular expression matching correct attribute names. Overrides attr-naming- +# style. If left empty, attribute names will be checked with the set naming +# style. +#attr-rgx= + +# Bad variable names which should always be refused, separated by a comma. +bad-names=foo, + bar, + baz, + toto, + tutu, + tata + +# Bad variable names regexes, separated by a comma. If names match any regex, +# they will always be refused +bad-names-rgxs= + +# Naming style matching correct class attribute names. +class-attribute-naming-style=any + +# Regular expression matching correct class attribute names. Overrides class- +# attribute-naming-style. If left empty, class attribute names will be checked +# with the set naming style. +#class-attribute-rgx= + +# Naming style matching correct class constant names. +class-const-naming-style=UPPER_CASE + +# Regular expression matching correct class constant names. Overrides class- +# const-naming-style. If left empty, class constant names will be checked with +# the set naming style. +#class-const-rgx= + +# Naming style matching correct class names. +class-naming-style=PascalCase + +# Regular expression matching correct class names. Overrides class-naming- +# style. If left empty, class names will be checked with the set naming style. +#class-rgx= + +# Naming style matching correct constant names. +const-naming-style=UPPER_CASE + +# Regular expression matching correct constant names. Overrides const-naming- +# style. If left empty, constant names will be checked with the set naming +# style. +#const-rgx= + +# Minimum line length for functions/classes that require docstrings, shorter +# ones are exempt. +docstring-min-length=-1 + +# Naming style matching correct function names. +function-naming-style=snake_case + +# Regular expression matching correct function names. Overrides function- +# naming-style. If left empty, function names will be checked with the set +# naming style. +#function-rgx= + +# Good variable names which should always be accepted, separated by a comma. +good-names=i, + j, + k, + ex, + Run, + _ + +# Good variable names regexes, separated by a comma. If names match any regex, +# they will always be accepted +good-names-rgxs= + +# Include a hint for the correct naming format with invalid-name. +include-naming-hint=no + +# Naming style matching correct inline iteration names. +inlinevar-naming-style=any + +# Regular expression matching correct inline iteration names. Overrides +# inlinevar-naming-style. If left empty, inline iteration names will be checked +# with the set naming style. +#inlinevar-rgx= + +# Naming style matching correct method names. +method-naming-style=snake_case + +# Regular expression matching correct method names. Overrides method-naming- +# style. If left empty, method names will be checked with the set naming style. +#method-rgx= + +# Naming style matching correct module names. +module-naming-style=snake_case + +# Regular expression matching correct module names. Overrides module-naming- +# style. If left empty, module names will be checked with the set naming style. +#module-rgx= + +# Colon-delimited sets of names that determine each other's naming style when +# the name regexes allow several styles. +name-group= + +# Regular expression which should only match function or class names that do +# not require a docstring. +no-docstring-rgx=^_ + +# List of decorators that produce properties, such as abc.abstractproperty. Add +# to this list to register other decorators that produce valid properties. +# These decorators are taken in consideration only for invalid-name. +property-classes=abc.abstractproperty + +# Regular expression matching correct type variable names. If left empty, type +# variable names will be checked with the set naming style. +#typevar-rgx= + +# Naming style matching correct variable names. +variable-naming-style=snake_case + +# Regular expression matching correct variable names. Overrides variable- +# naming-style. If left empty, variable names will be checked with the set +# naming style. +#variable-rgx= + + +[CLASSES] + +# Warn about protected attribute access inside special methods +check-protected-access-in-special-methods=no + +# List of method names used to declare (i.e. assign) instance attributes. +defining-attr-methods=__init__, + __new__, + setUp, + __post_init__ + +# List of member names, which should be excluded from the protected access +# warning. +exclude-protected=_asdict, + _fields, + _replace, + _source, + _make + +# List of valid names for the first argument in a class method. +valid-classmethod-first-arg=cls + +# List of valid names for the first argument in a metaclass class method. +valid-metaclass-classmethod-first-arg=cls + + +[DESIGN] + +# List of regular expressions of class ancestor names to ignore when counting +# public methods (see R0903) +exclude-too-few-public-methods= + +# List of qualified class names to ignore when counting class parents (see +# R0901) +ignored-parents= + +# Maximum number of arguments for function / method. +max-args=5 + +# Maximum number of attributes for a class (see R0902). +max-attributes=7 + +# Maximum number of boolean expressions in an if statement (see R0916). +max-bool-expr=5 + +# Maximum number of branch for function / method body. +max-branches=12 + +# Maximum number of locals for function / method body. +max-locals=15 + +# Maximum number of parents for a class (see R0901). +max-parents=7 + +# Maximum number of public methods for a class (see R0904). +max-public-methods=20 + +# Maximum number of return / yield for function / method body. +max-returns=6 + +# Maximum number of statements in function / method body. +max-statements=50 + +# Minimum number of public methods for a class (see R0903). +min-public-methods=2 + + +[EXCEPTIONS] + +# Exceptions that will emit a warning when caught. +overgeneral-exceptions=BaseException, + Exception + + +[FORMAT] + +# Expected format of line ending, e.g. empty (any line ending), LF or CRLF. +expected-line-ending-format= + +# Regexp for a line that is allowed to be longer than the limit. +ignore-long-lines=^\s*(# )??$ + +# Number of spaces of indent required inside a hanging or continued line. +indent-after-paren=4 + +# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1 +# tab). +indent-string=' ' + +# Maximum number of characters on a single line. +max-line-length=100 + +# Maximum number of lines in a module. +max-module-lines=1000 + +# Allow the body of a class to be on the same line as the declaration if body +# contains single statement. +single-line-class-stmt=no + +# Allow the body of an if to be on the same line as the test if there is no +# else. +single-line-if-stmt=no + + +[IMPORTS] + +# List of modules that can be imported at any level, not just the top level +# one. +allow-any-import-level= + +# Allow wildcard imports from modules that define __all__. +allow-wildcard-with-all=no + +# Deprecated modules which should not be used, separated by a comma. +deprecated-modules= + +# Output a graph (.gv or any supported image format) of external dependencies +# to the given file (report RP0402 must not be disabled). +ext-import-graph= + +# Output a graph (.gv or any supported image format) of all (i.e. internal and +# external) dependencies to the given file (report RP0402 must not be +# disabled). +import-graph= + +# Output a graph (.gv or any supported image format) of internal dependencies +# to the given file (report RP0402 must not be disabled). +int-import-graph= + +# Force import order to recognize a module as part of the standard +# compatibility libraries. +known-standard-library= + +# Force import order to recognize a module as part of a third party library. +known-third-party=enchant + +# Couples of modules and preferred modules, separated by a comma. +preferred-modules= + + +[LOGGING] + +# The type of string formatting that logging methods do. `old` means using % +# formatting, `new` is for `{}` formatting. +logging-format-style=old + +# Logging modules to check that the string format arguments are in logging +# function parameter format. +logging-modules=logging + + +[MESSAGES CONTROL] + +# Only show warnings with the listed confidence levels. Leave empty to show +# all. Valid levels: HIGH, CONTROL_FLOW, INFERENCE, INFERENCE_FAILURE, +# UNDEFINED. +confidence=HIGH, + CONTROL_FLOW, + INFERENCE, + INFERENCE_FAILURE, + UNDEFINED + +# Disable the message, report, category or checker with the given id(s). You +# can either give multiple identifiers separated by comma (,) or put this +# option multiple times (only on the command line, not in the configuration +# file where it should appear only once). You can also use "--disable=all" to +# disable everything first and then re-enable specific checks. For example, if +# you want to run only the similarities checker, you can use "--disable=all +# --enable=similarities". If you want to run only the classes checker, but have +# no Warning level messages displayed, use "--disable=all --enable=classes +# --disable=W". +disable=raw-checker-failed, + bad-inline-option, + locally-disabled, + file-ignored, + suppressed-message, + useless-suppression, + deprecated-pragma, + use-symbolic-message-instead + +# Enable the message, report, category or checker with the given id(s). You can +# either give multiple identifier separated by comma (,) or put this option +# multiple time (only on the command line, not in the configuration file where +# it should appear only once). See also the "--disable" option for examples. +enable=c-extension-no-member + + +[METHOD_ARGS] + +# List of qualified names (i.e., library.method) which require a timeout +# parameter e.g. 'requests.api.get,requests.api.post' +timeout-methods=requests.api.delete,requests.api.get,requests.api.head,requests.api.options,requests.api.patch,requests.api.post,requests.api.put,requests.api.request + + +[MISCELLANEOUS] + +# List of note tags to take in consideration, separated by a comma. +notes=FIXME, + XXX, + TODO + +# Regular expression of note tags to take in consideration. +notes-rgx= + + +[REFACTORING] + +# Maximum number of nested blocks for function / method body +max-nested-blocks=5 + +# Complete name of functions that never returns. When checking for +# inconsistent-return-statements if a never returning function is called then +# it will be considered as an explicit return statement and no message will be +# printed. +never-returning-functions=sys.exit,argparse.parse_error + + +[REPORTS] + +# Python expression which should return a score less than or equal to 10. You +# have access to the variables 'fatal', 'error', 'warning', 'refactor', +# 'convention', and 'info' which contain the number of messages in each +# category, as well as 'statement' which is the total number of statements +# analyzed. This score is used by the global evaluation report (RP0004). +evaluation=max(0, 0 if fatal else 10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)) + +# Template used to display messages. This is a python new-style format string +# used to format the message information. See doc for all details. +msg-template= + +# Set the output format. Available formats are text, parseable, colorized, json +# and msvs (visual studio). You can also give a reporter class, e.g. +# mypackage.mymodule.MyReporterClass. +#output-format= + +# Tells whether to display a full report or only the messages. +reports=no + +# Activate the evaluation score. +score=yes + + +[SIMILARITIES] + +# Comments are removed from the similarity computation +ignore-comments=yes + +# Docstrings are removed from the similarity computation +ignore-docstrings=yes + +# Imports are removed from the similarity computation +ignore-imports=yes + +# Signatures are removed from the similarity computation +ignore-signatures=yes + +# Minimum lines number of a similarity. +min-similarity-lines=4 + + +[SPELLING] + +# Limits count of emitted suggestions for spelling mistakes. +max-spelling-suggestions=4 + +# Spelling dictionary name. Available dictionaries: none. To make it work, +# install the 'python-enchant' package. +spelling-dict= + +# List of comma separated words that should be considered directives if they +# appear at the beginning of a comment and should not be checked. +spelling-ignore-comment-directives=fmt: on,fmt: off,noqa:,noqa,nosec,isort:skip,mypy: + +# List of comma separated words that should not be checked. +spelling-ignore-words= + +# A path to a file that contains the private dictionary; one word per line. +spelling-private-dict-file= + +# Tells whether to store unknown words to the private dictionary (see the +# --spelling-private-dict-file option) instead of raising a message. +spelling-store-unknown-words=no + + +[STRING] + +# This flag controls whether inconsistent-quotes generates a warning when the +# character used as a quote delimiter is used inconsistently within a module. +check-quote-consistency=no + +# This flag controls whether the implicit-str-concat should generate a warning +# on implicit string concatenation in sequences defined over several lines. +check-str-concat-over-line-jumps=no + + +[TYPECHECK] + +# List of decorators that produce context managers, such as +# contextlib.contextmanager. Add to this list to register other decorators that +# produce valid context managers. +contextmanager-decorators=contextlib.contextmanager + +# List of members which are set dynamically and missed by pylint inference +# system, and so shouldn't trigger E1101 when accessed. Python regular +# expressions are accepted. +generated-members= + +# Tells whether to warn about missing members when the owner of the attribute +# is inferred to be None. +ignore-none=yes + +# This flag controls whether pylint should warn about no-member and similar +# checks whenever an opaque object is returned when inferring. The inference +# can return multiple potential results while evaluating a Python object, but +# some branches might not be evaluated, which results in partial inference. In +# that case, it might be useful to still emit no-member and other checks for +# the rest of the inferred objects. +ignore-on-opaque-inference=yes + +# List of symbolic message names to ignore for Mixin members. +ignored-checks-for-mixins=no-member, + not-async-context-manager, + not-context-manager, + attribute-defined-outside-init + +# List of class names for which member attributes should not be checked (useful +# for classes with dynamically set attributes). This supports the use of +# qualified names. +ignored-classes=optparse.Values,thread._local,_thread._local,argparse.Namespace + +# Show a hint with possible names when a member name was not found. The aspect +# of finding the hint is based on edit distance. +missing-member-hint=yes + +# The minimum edit distance a name should have in order to be considered a +# similar match for a missing member name. +missing-member-hint-distance=1 + +# The total number of similar names that should be taken in consideration when +# showing a hint for a missing member. +missing-member-max-choices=1 + +# Regex pattern to define which classes are considered mixins. +mixin-class-rgx=.*[Mm]ixin + +# List of decorators that change the signature of a decorated function. +signature-mutators= + + +[VARIABLES] + +# List of additional names supposed to be defined in builtins. Remember that +# you should avoid defining new builtins when possible. +additional-builtins= + +# Tells whether unused global variables should be treated as a violation. +allow-global-unused-variables=yes + +# List of names allowed to shadow builtins +allowed-redefined-builtins= + +# List of strings which can identify a callback function by name. A callback +# name must start or end with one of those strings. +callbacks=cb_, + _cb + +# A regular expression matching the name of dummy variables (i.e. expected to +# not be used). +dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_ + +# Argument names that match this expression will be ignored. +ignored-argument-names=_.*|^ignored_|^unused_ + +# Tells whether we should check for unused import in __init__ files. +init-import=no + +# List of qualified module names which can have objects that can redefine +# builtins. +redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io diff --git a/README.rst b/README.rst index 0752fa0ce..aaa556ee5 100644 --- a/README.rst +++ b/README.rst @@ -22,127 +22,31 @@ VulnerableCode is a free and open database of open source software package vulnerabilities **because open source software vulnerabilities data and tools should be free and open source themselves**: -we are trying to change this and evolve the status quo in a few other areas! - -- Vulnerability databases have been **traditionally proprietary** even though they - are mostly about free and open source software. - -- Vulnerability databases also often contain a lot of lesser value data which - means a lot of false positive signals that require extensive expert reviews. - -- Vulnerability databases are also mostly about vulnerabilities first and software - package second, making it difficult to find if and when a vulnerability applies - to a piece of code. VulnerableCode focus is on software package first where - a Package URL is a key and natural identifier for packages; this is making it - easier to find a package and whether it is vulnerable. - -Package URL themselves were designed first in ScanCode and VulnerableCode -and are now a de-facto standard for vulnerability management and package references. - -See https://github.com/package-url/purl-spec - -The VulnerableCode project is a FOSS community resource to help improve the -security of the open source software ecosystem and its users at large. - -VulnerableCode consists of a database and the tools to collect, refine and keep -the database current. - -.. warning:: - VulnerableCode is under active development and is not yet fully - usable. - Read more about VulnerableCode https://vulnerablecode.readthedocs.org/ -VulnerableCode is financially supported by NLnet, nexB, Google (through the -GSoC) and the active contributions of several volunteers. - -VulnerableCode tech stack is Python, Django, PostgreSQL, nginx and Docker and -several libraries. - - -Getting started ---------------- - -Run with Docker -^^^^^^^^^^^^^^^^ - -First install docker and docker-compose, then run:: - - git clone https://github.com/nexB/vulnerablecode.git && cd vulnerablecode - make envfile - docker-compose build - docker-compose up -d - docker-compose run vulnerablecode ./manage.py import --list - -Then run an importer for nginx advisories (which is small):: - - docker-compose exec vulnerablecode ./manage.py import vulnerabilities.importers.nginx.NginxImporter - docker-compose exec vulnerablecode ./manage.py improve --all - -At this point, the VulnerableCode app and API should be up and running with -some data at http://localhost - - -Populate VulnerableCode database -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -VulnerableCode data collection works in two steps: importing data from multiple -sources and then refining and improving how package and software vulnerabilities -are related. - -To run all importers and improvers use this:: - - ./manage.py import --all - ./manage.py improve --all - - -Local development installation -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -On a Debian system, use this:: - - sudo apt-get install python3-venv python3-dev postgresql libpq-dev build-essential - git clone https://github.com/nexB/vulnerablecode.git && cd vulnerablecode - make dev envfile postgres - make test - source venv/bin/activate - ./manage.py import vulnerabilities.importers.nginx.NginxImporter - ./manage.py improve --all - make run - -At this point, the VulnerableCode app and API is up at http://127.0.0.1:8001/ - -Interface -^^^^^^^^^^ - - -VulnerableCode comes with a minimal web UI: - -.. image:: vulnerablecode-ui.png - -And a JSON API and its minimal web documentation: - -.. image:: vulnerablecode-json-api.png -.. image:: vulnerablecode-api-doc.png - - -License -^^^^^^^^^^ - -Copyright (c) nexB Inc. and others. All rights reserved. - -VulnerableCode is a trademark of nexB Inc. - -SPDX-License-Identifier: Apache-2.0 AND CC-BY-SA-4.0 - -VulnerableCode software is licensed under the Apache License version 2.0. - -VulnerableCode data is licensed collectively under CC-BY-SA-4.0. - -See https://www.apache.org/licenses/LICENSE-2.0 for the license text. - -See https://creativecommons.org/licenses/by-sa/4.0/legalcode for the license text. - -See https://github.com/nexB/vulnerablecode for support or download. - -See https://aboutcode.org for more information about nexB OSS projects. +Hritik's Fork +============== + +.. code-block:: + + git clone git@github.com:Hritik14/vulnerablecode.git + cd vulnerablecode + make dev + . venv/bin/activate + pip install pylint pylint_django + git config --global merge.ours.driver true + ... + git remote set-url origin git@github.com:nexB/vulnerablecode.git + git remote add fork git@github.com:Hritik14/vulnerablecode.git + git branch forkmain + git fetch fork + git branch forkmain --set-upstream-to fork/main + git branch main --set-upstream-to origin/main + git pull origin main --rebase + git checkout forkmain + git merge main + git push fork forkmain:main + git checkout main + git restore --source=fork/main .pylintrc + +See: .pylintrc