Send readings from an SCT013 non invasive Current transformer to InfluxDB using an esp8266 D1 Mini
This example uses a 30A 1V version of the SCT013 and assumes a 240v supply.
It also uses a Mains Power Sensor board from https://www.mottramlabs.com/esp_products.html
It also has a basic web interface that displays the RMS Current and power in Watts, the ip address will be printed in the serial monitor when it connects to WiFi along with ADC Reading, RMS Voltage, Actual Current and Power in Watts
Any errors relating to your influxdb connection are also printed to help with connection issues.
Below is a screenshot from my InfluxDB dashboard.
