Skip to content

Latest commit

 

History

History
111 lines (79 loc) · 4.47 KB

README.md

File metadata and controls

111 lines (79 loc) · 4.47 KB
Raw

HP Remote System Controller bulk enrollment tool

This script is used to enroll multiple HP Remote System Controllers (RSC) into the HP Remote System Management (RSM) cloud fleet manager in one go. It uses the Redfish API exposed by the RSC to to do so.

How to install

  1. Install Python 3. Windows or Linux versions are available here: https://www.python.org/downloads/.

  2. Download the application wheel file (.whl) from the releases page.

  3. Open a the command promt application (Windows), or a terminal (Linux).

  4. Create a virtual environment for the scripts to run in. This is not required, but recommended.

    python3 -m venv rscvenv

  5. Activate the virtual environment. In case you did not create one, skip this step.

    Linux: source rscvenv/bin/activate

    Windows: rscvenv\Scripts\activate.bat

  6. Upgrade pip to the latest version.

    pip install --upgrade pip

  7. Install the application downloaded in step 2.

    python3 -m pip install <path to wheel file>

Usage

rsc_bulk_enrollment [-h] [-c CSVFilePath] [-e] [-p] [-i [addr,curPass[,newPass] [addr,curPass[,newPass] ...]]] [--verbose] [-d] [--proxy PROXY]
                     [--ntp NTP]

RSC Bulk Cloud Enroller

optional arguments:
  -h, --help            show this help message and exit
  -c CSVFilePath        CSV file path
  -e, --examples        Display help message with usage examples.
  -p                    Only validate passwords and exit.
  -i [addr,curPass[,newPass] [addr,curPass[,newPass] ...]]
                        Specify an RSC's IP, current password and new password (if necessary), separated by commas.
  --verbose, -v         Verbose logging. Can be used up to 2 times.
  -d                    Discover RSCs in the network and exit. Requires mDNS port (UDP 5353) to be open.
  --proxy PROXY         Set this proxy for cloud access.
  --ntp NTP             Set this NTP server to correct RSCs' times.

The script automates the following steps for each RSC:

  1. Change the default administrator password of the RSC to a user provided password if needed.
  2. Adjust NTP settings of the RSC if informed to do so.
  3. Tell the RSC to enroll into the RSM.

Step 3 generates a verification URI that is used to verify the enrollment. The script aggregates all verification URIs and prints a single URI to the console, which can be used to verify all enrollments at once. The script then monitors the enrollment status of every RSC.

Users can provide a list of RSCs to enroll in two ways:

  1. Specify all RSCs in the command line directly. Example:

    rsc_bulk_enrollment -i 192.168.0.88,CurrentPassword1 rsc2hostname,CurrentPassword2,Newpassword2

  2. Specify a CSV file with RSCs. Example:

    rsc_bulk_enrollment -c RSC.csv

See the next section for the CSV format.

CSV Format

Given RSC.csv as a file with the following contents:

192.168.240.172,CurrentPassword1,Newpassword1
192.168.240.46,CurrentPassword2,Newpassword2
192.168.240.42,CurrentPassword3
rsc-8DD123FFF,CurrentPassword4

The first two lines specify an address, current password and a new password. If a password change is required, that is, the RSC's password is still the default administrator password set at the factory, the script will change the current password to the new password.

The third line only specifies the current password. If a password change is required the script will fail and produce an error message.

The fourth line specifies the RSC hostname instead of the IP address, which by default is "rsc-" with the serial number of the RSC, which can be scanned on the RSC QR code label. For example, the default hostname for serial number 8DD123FFF would be, rsc-8DD123FFF.

Examples

  • Pass in a CSV of RSCs to enroll to cloud:

    python3 rsc_bulk_enroll -c RSC.csv

  • Pass in RSCs as parameters:

    python3 rsc_bulk_enroll -i 192.168.240.172,CurrentPassword1 192.168.240.46,CurrentPassword2,Newpassword2

  • Pass in a CSV of RSCs but only verify if the passwords are ok:

    python3 rsc_bulk_enroll -c RSC.csv -p

  • Pass in a CSV of RSCs to enroll to cloud, informing proxy and NTP settings:

    python3 rsc_bulk_enroll -c RSC.csv --ntp myNTPserver.com --proxy http://myproxy.com:8080

  • Discover RSCs in the network (requires mDNS port - 5353 - to be open) and exit:

    python3 rsc_bulk_enroll -d