Assembling a FPV drone shown in the paper

[8pterosaur]

Thank you so much for your excellent work!

I have a drone and try to fix the quad-cam mentioned in #2 (comment).
However, due to the difference of the drone structure, I have some difficulties. Therefore, I would like to ask the author for some details about drone hardware.

Next I plan to use OddityRC XI35Pro and the official recommended motor (Stream 2006 motor), propeller (Gemfan D90-3.5).
I especially want to know the type of flight controller with four integrated electronic speed controls (ESCs) you writted in paper. If possible, can you share the drawings of other parts for the convenience of direct 3D printing.

Thank you.

[Peize-Liu]

Thank you so much for your excellent work!

I have a drone and try to fix the quad-cam mentioned in #2 (comment). However, due to the difference of the drone structure, I have some difficulties. Therefore, I would like to ask the author for some details about drone hardware.

Next I plan to use OddityRC XI35Pro and the official recommended motor (Stream 2006 motor), propeller (Gemfan D90-3.5). I especially want to know the type of flight controller with four integrated electronic speed controls (ESCs) you writted in paper. If possible, can you share the drawings of other parts for the convenience of direct 3D printing.

Thank you.

The platform is now using NxtPX4 https://github.com/HKUST-Aerial-Robotics/NxtPX4 and you can simply buy it on TaoBao weikong tech(微空科技). There is no specific ESC for Xi35, so just choose the one you prefer. XI35Pro frame is now largely different from the version we have for D2SLAM, so you might need to consider draw it yourself since we are now developing a new platform which we designed the frame by ourself and we dont have any direct designs for new version XI35pro.

[8pterosaur]

Thank you very much for your reply. I'll try NxtPX4 later on.

In the paper, this drone has a takeoff weight of about 623g when using a 22.8v 1550man battery. However, I roughly estimated the weight of Jestson Xavier NX, battery, D435i and some other parts.
They are about 1.2kg. For a 3.5-inch FPV drone, can it bear such a load?

Regarding the new platform you have developed, can you tell us more details about it, and I hope you can give some advice on this.

Thanks.

[8pterosaur]

Hi, I just found your video about FPV drones at https://www.bilibili.com/video/BV1Kc411s7zb/?vd_source=47a0b62670644cf403fc3202c1cbd094
It looks like it performs very well.
Can you post the purchase list if you have time, so that everyone and future people can learn.
Grateful.

[Peize-Liu]

Hi, I just found your video about FPV drones at https://www.bilibili.com/video/BV1Kc411s7zb/?vd_source=47a0b62670644cf403fc3202c1cbd094 It looks like it performs very well. Can you post the purchase list if you have time, so that everyone and future people can learn. Grateful.

Sure, we are now running a new project on D2SLAM with newly designed hardware and software platform, we will gradually release all the code and hardware design before Oct 2023.

[8pterosaur]

Okay, very much looking forward to your follow-up work and the latest progress.