firmware.yml

name: Firmware Checks

on:
  push:
    branches:
      - master
      - dev-*
    paths-ignore:
      - '*.py'
      - 'inputmodule-control/**'
  pull_request:
    branches:
      - '*'
    paths-ignore:
      - '*.py'
      - 'inputmodule-control/**'

env:
  CARGO_TERM_COLOR: always
  CARGO_NET_GIT_FETCH_WITH_CLI: true

jobs:
  building:
    name: Building
    runs-on: [ubuntu-latest]
    steps:
      - uses: actions/checkout@v3

      - name: Setup Rust toolchain
        run: rustup show

      - run: cargo install cargo-make

      - run: cargo install flip-link
      - run: cargo make --cwd b1display
      - run: cargo make --cwd c1minimal
      - run: cargo make --cwd ledmatrix build-release
      - run: cargo make --cwd ledmatrix build-release-10k
      - run: cargo make --cwd ledmatrix build-release-evt
      - run: cargo make --cwd b1display build-release
      - run: cargo make --cwd c1minimal build-release

      - name: Convert to UF2 format
        run: |
            sudo apt-get update
            sudo apt-get install -y libudev-dev
            cargo make --cwd b1display uf2
            cargo make --cwd c1minimal uf2
            cargo make --cwd ledmatrix build-release-10k-uf2
            cargo make --cwd ledmatrix build-release-evt-uf2
            cargo make --cwd ledmatrix uf2

      - name: Convert to bin format
        run: |
            sudo apt-get update
            sudo apt-get install -y llvm
            cargo make --cwd b1display bin
            cargo make --cwd c1minimal bin
            cargo make --cwd ledmatrix bin

      - name: Upload ledmatrix files
        uses: actions/upload-artifact@v3
        with:
          name: inputmodule_fw_bin
          path: |
            ledmatrix.bin
            ledmatrix.uf2
            ledmatrix_10k.uf2
            ledmatrix_evt.uf2

      - name: Upload b1display files
        uses: actions/upload-artifact@v3
        with:
          name: inputmodule_fw_uf2
          path: |
            b1display.bin
            b1display.uf2

      - name: Upload c1minimal files
        uses: actions/upload-artifact@v3
        with:
          name: inputmodule_fw_uf2
          path: |
            c1minimal.bin
            c1minimal.uf2

  linting:
    name: Linting
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3

      - name: Setup Rust toolchain
        run: rustup show

      - run: |
          cargo clippy -p b1display -- --deny=warnings
          cargo clippy -p c1minimal -- --deny=warnings
          cargo clippy -p ledmatrix -- --deny=warnings

      # fl16-inputmodules/src/serialnum.rs
      # is currently used by all firmwares to show their firmware version.
      # But it shows the version of the fl16-inputmodules package.
      # So that needs to be the same as the firmware version.
      - name: Check versions of all packages are the same
        run: |
          cargo pkgid -p fl16-inputmodules | cut -d "#" -f2 >> versions.tmp
          cargo pkgid -p b1display | cut -d "#" -f2 >> versions.tmp
          cargo pkgid -p c1minimal | cut -d "#" -f2 >> versions.tmp
          cargo pkgid -p ledmatrix | cut -d "#" -f2 >> versions.tmp
          uniq -c versions.tmp | [ $(wc -l) -eq 1 ]

  formatting:
    name: Formatting
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3

      - name: Setup Rust toolchain
        run: rustup show

      - run: cargo fmt --all -- --check