From c493373d3d09e5e54bef157efa8e2589811f0f92 Mon Sep 17 00:00:00 2001 From: DenisMitchell Date: Sat, 31 Aug 2024 11:36:28 -0400 Subject: [PATCH] Update Idle-Settings.md Scout's honor, I ran build again locally. Updated the other images which had case disparities. --- docs/06-Basic-Features/Idle-Control/Idle-Settings.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/06-Basic-Features/Idle-Control/Idle-Settings.md b/docs/06-Basic-Features/Idle-Control/Idle-Settings.md index 226165a..58ad104 100644 --- a/docs/06-Basic-Features/Idle-Control/Idle-Settings.md +++ b/docs/06-Basic-Features/Idle-Control/Idle-Settings.md @@ -30,7 +30,7 @@ The VSS must be at or below this speed before the idle state can be entered. Set ### Open Loop Idle -![image](Idle-Settings/OpenLoopIdle.png) +![image](Idle-Settings/openLoopIdle.png) #### Open loop base position @@ -188,6 +188,6 @@ See [here](../Idle-VE-Table) for more detail about idle-specific VE settings. Found under _Idle > Ignition Advance_. -![image](Idle-Settings/IdleAdvanceAngle.png) +![image](Idle-Settings/idleAdvanceAngle.png) Only enabled when _Use idle ignition table_ is set to __true__. 2D table (curve). The values in this table are used in place of the regular ignition curve when idle is active, or during the cranking taper if _Use idle tables for cranking taper_ is set to __true__. Unlike _Closed-loop Idle Timing_, this table does not react to _Idle target RPM_ and is open loop only.