Skip to content

Latest commit

 

History

History
282 lines (188 loc) · 10.9 KB

MANUAL.rst

File metadata and controls

282 lines (188 loc) · 10.9 KB

passhole

KeePass CLI and dmenu interface

Author: Evan Widloski
Copyright: GPL-3.0
Manual group:password management

SYNOPSIS

ph [OPTIONAL ARGS] [COMMAND] [COMMAND OPTIONS] [COMMAND ARGS]

COMMANDS

show [-h] [--field FIELD] [--totp] PATH
Show the contents of an entry, where PATH is the full path to the entry. The password field is spoilered and must be highlighted to reveal the plaintext password. Use --field FIELD to print only the specified field, where FIELD is one of 'title', 'username', 'password', 'url', or a custom field. The --totp option will parse any OTP URIs and print the code.
type [-h] [--prog PROG] [--tabbed] [--totp] [--xdotool] [--username] [--duration TIME] [--delay TIME] [name]
Automatically type out the password as if the user had typed it on the keyboard, where PROG is a dmenu-like program for selecting an entry. PROG defaults to 'dmenu'. This is useful when you want to automatically fill a selected password field in any application. name is the name of the database to type from. If not given, type from all databases. Use the --tabbed option to type out the username then password, separated by a tab. Use the --totp option to generate and type otp using 'otp' attribute. Use the --username option to show entry username in parenthesis during selection. Use the --xdotool option to use xdotool instead of the Python keyboard library. Useful for handling unicode input. Use --duration to specify the time in seconds for which a key should be pressed when typing (defaults to 0.012) and --delay to set the time between to separate key strokes. Note that this command is intended to be invoked via keyboard shortcut.
add [-h] [-w [LENGTH] | -a [LENGTH] | -s [LENGTH]] [--append STR] [--fields FIELD1,...] PATH
Add a new entry/group to the database, where PATH is the full path to the entry or group. Use -w, -a, or -s to generate a correct horse battery staple, alphanumeric, or alphanumeric + symbolic password, respectively. LENGTH defaults to 5 words for -w and 32 characters for -a and -s unless otherwise specified. Use --append to append STR to the end of the generated password to meet specific password requirements. Use --fields to specify a comma separated list of custom fields to prompt for during entry creation.
remove [-h] PATH
Remove an entry/group from the database, where PATH is the full path to the entry or group.
edit [-h] [--field FIELD | --set FIELD VALUE | --remove FIELD] PATH
Edit the contents of an entry or group, where PATH is the full path to the entry or group. You will be prompted to edit each field value. Use --field FIELD to edit only the specified field, where FIELD is one of title, username, password, url, or a custom field when editing entries. This option has no effect for groups. Use --set FIELD VALUE to set the value of a field, noninteractively for entries. Only name is supported for groups. Use --remove FIELD to remove an existing custom entry field. This option has no effect for groups.
move [-h] SRC_PATH DEST_PATH
Move an entry/group to another path, where SRC_PATH and DEST_PATH are the full paths to the source and destination items. Providing two entry paths or two group paths will move and rename the entry or group.
list [-h] [--username] [PATH]
List entries/groups in the database, where PATH is an optional path to a entry or group. Use the --username option to show entry username in addition to title.
grep [-h] [-i] [--field FIELD] PATTERN
List entries with titles matching a regex pattern, where PATTERN is an XSLT style regular expression. Use the --field FIELD option to search other string fields, where FIELD is one of title, username, password, url, or a custom field. Use the -i option to enable case insensitive searching.
kill [-h]
Kill the background server.
restart [-h]
Restart the background server.
init [-h] [--name NAME] [--database DATABASE] [--password PASSWORD] [--keyfile KEYFILE]
Create a new database. You will be prompted for the database password and whether or not to use a keyfile. See --database and --keyfile to initialize in a non-default location.
eval [-h] [--json] CODE
Evaluate CODE as Python code. Variable kp is in scope

for accessing the database. ag is also available as shorthand for operator.attrgetter. If --json is provided, CODE will be evaluated and should be an expression which returns a JSON-serializable result. Otherwise, CODE is executed and the printing is left up to the user (the json library is in scope for serialization.)

dump [-h]
Pretty print database XML to console. Passwords will appear in plaintext.

OPTIONAL ARGS

-h, --help
Print out a help message and exit. Use in conjunction with a command for command-specific help.
--debug
Enable debug messages.
--database PATH
Specify the path to the KeePass database when initializing, accessing or modifying the database. The config is ignored when this is given.
--keyfile PATH
Specify the path to the keyfile when initializing, accessing or modifying the database. No effect if --database is not given.
--password PASSWORD
Supply password directly (possibly insecure), or read it from stdin when supplied '-'
--no-password
Don't prompt for a password when accessing or modifying the database. No effect if --database is not given.
--no-cache
Don't read from or write to cache while opening this database.
--cache-timeout
Timeout to read from or write to cache while opening this database. No effect if --no-cache=True
--config PATH
Specify path to config.
-v, --version
Print out version information.

Files

~/.config/passhole.ini
Default location of config. Specify multiple databases here or edit database options. See the config section for supported directives.
~/.local/passhole.kdbx
Default location of KeePass database. Override with --database PATH
~/.local/passhole.key
Default location KeePass key. Override with --keyfile PATH or in config.

Config

Located at ~/.config/passhole.ini by default. Can be overriden with the --config option. Each section in the config corresponds to a database. The supported options are:

database: /path/to/example.kdbx
Required. The path to the kdbx file.
keyfile: /path/to/example.key
Optional. Path to keyfile. If not given, assume database has no keyfile.
no-password: True
Optional. Assume database has no password and don't prompt for it. If not given, the password will be loaded from cache or the user prompted.
no-cache: True
Optional. Don't read from or write to cache when opening this database.
cache-timeout: 300
Seconds to keep databases open in cache. Cache timeout is the same for all open databases and should be set in the first section in the config. The timeout timer resets with each passhole invocation. No effect if no-cache=True
default: True
Optional. Set this database as default. When using multiple databases, entry or group paths with no @[Name] database prefix are assumed to refer to this database.

Multiple Databases

All commands support multiple databases. Prefix entry or group paths with @[Name]/, where [Name] is the database name given in the config. A path with no prefix is assumed to be the default database.

# move an entry in the *test* database to the default database.
$ ph mv @test/foobar_group/foobar_entry root_entry

# list the test database
$ ph ls @test/

More databases may be added using the init command or manually specified in the config:

[test]
# Use this database as the default
# default: True
# Path to database (required)
database: /path/to/test.kdbx
# Path to keyfile.  if absent, assume no keyfile
keyfile: /path/to/test.key
# Does the database have a password?
# no-password: True
# Path to password cache.  If absent, don't cache password.
# Must be unique for each database
cache: ~/.cache/test_cache

Python Scripts

The open_database function is available for use in scripts to conveniently open the default database. When all=True, it returns a list of tuples of the form ('[NAME]', [PyKeePass object]), where NAME is specified in the config.

from passhole.passhole import open_database
kp = open_database()

Examples

add a new entry with manually created password

$ ph add github
Username: Evidlo
Password:
Confirm:
URL: github.com

add an entry with a generated alphanumeric password

$ ph add neopets -a
Username: Evidlo
URL: neopets.com

add a new group

$ ph add social/

add an entry to social/ with a 32 character password (alphanumeric + symbols)

$ ph add social/facebook -s 32
Username: [email protected]
URL: facebook.com

add an entry to social/ with a correct-horse-battery-staple type password

$ ph add social/twitter -w
Username: [email protected]
URL: twitter.com

list all entries

$ ph list
github
neopets
[social]
├── facebook
└── twitter

display contents of entry

$ ph show social/twitter
Title: twitter
Username: Evidlo
Password: inns.ambien.travelling.throw.force
URL: twitter.com

retrieve contents of specific field for use in scripts

$ ph show social/twitter --field password
inns.ambien.travelling.throw.force

custom evaluated expressions

Get title of all entries whose URLs start with 't'

$ ph eval -j 'map(attrgetter("title"), filter(lambda e: (e.url or "").startswith("t"), kp.entries))'
["twitter"]

Same example as above, but with multiline code in a Bash Heredoc

ph eval - <<EOF
titles = []
for e in kp.entries:
    if (e.url or "").startswith("t"):
        titles.append(e.title)
print(json.dumps(titles))
EOF

Same example again, but using underlying PyKeePass API

ph eval -j 'map(ag("title"), kp.find_entries(url="^t.*", regex=True))'