Blinking power light/ Damaged JST?

[rainbow-lazer]

Hello, I recently got a new lipo battery for my board, the JST connector of which got stuck in the port. I had to pull it out (as gently as possible) with pliers.

After soldering on a new JST to the battery, my board's power light (D6) and one of the radio lights (D2), blink on and off, and the board doesn't seem to boot off the battery anymore. Here's a video: https://www.dropbox.com/s/ttkknapebdbdmxr/2018-06-15%2014.51.54.mov?dl=0

When I connect via USB, the lights work as usual and it boots fine. The receiving power port on the board looks just fine, I don't see any bent pins or cracked solder; is there any other way to troubleshoot what's going on with my JST power?

Thanks!

[rainbow-lazer]

ps, just to troubleshoot, I used a multimeter on the repaired battery and it is giving 3.7v. I also tried the battery from my backup board (which I know works), and still get the same blinking lights.

[mogar]

Can you email us at [email protected]? We can work on this issue there.