Deploying to gh-pages from @ f736e0e 🚀

bed-presence-mk1/sensors.md

@@ -19,15 +19,15 @@ Learn about the details of each sensor and what they mean.
 | `Bed Occupied Both`         | Binary (Occupancy) [Detected/Clear]   | Indicates if **Both** sides of the bed are occupied or not. |
 | `Bed Occupied Either`       | Binary (Occupancy) [Detected/Clear]   | Indicates if **Either** side of the bed is occupied or not. |
 | `(Fast) Sensors`            | Binary (Occupancy) [Detected/Clear]   | A copy of the primary occupancy sensors (Right/Left/Both/Either), with less delay. If you need quick response when getting into or out of bed, and can tolerate an increased chance of false negatives, use this sensor. `These sensors are disabled by default and must be manually enabled in the Home Assistant UI.` |
-| `Pressure [Right/Left]`     | Number (Pressure %) [0% -> 100%] | Indicates the current pressure reading. This value ranges from 0% to 100%, indicating the full range of the sensor. Do not worry if your unoccupied pressure reading is not 0%, or even if both sides of the bed are not similar. Some beds may swing from 0% (Unoccupied) to 95% (Occupied), while others may start at 70% and only increase to 75%. The important thing is that there is a measureable difference between the bed being occupied and unoccupied. |
+| `Pressure [Right/Left]`     | Number (Pressure %) [0% ⇒ 100%] | Indicates the current pressure reading. This value ranges from 0% to 100%, indicating the full range of the sensor. Do not worry if your unoccupied pressure reading is not 0%, or even if both sides of the bed are not similar. Some beds may swing from 0% (Unoccupied) to 95% (Occupied), while others may start at 70% and only increase to 75%. The important thing is that there is a measureable difference between the bed being occupied and unoccupied. |
 
 ## Values
 
 | Value Name                         | Type                                  |  Details                                    |
 |------------------------------------|---------------------------------------|---------------------------------------------|
-| `[Right/Left] Trigger Pressure`    | Number (Pressure %) [0% -> 100%] | When `[Right/Left] Pressure` is above this value, `[Right/Left] Bed Occupied` will register **Detected**. The calibration process will set this value, but it can also be adjusted manually. |
-| `[Right/Left] Unoccupied Pressure` | Number (Pressure %) [0% -> 100%] | Indicates the sensor value when the bed is unoccupied. Used for calculating the ideal `[Right/Left] Trigger Pressure`. The calibration process will set this value, but it can also be adjust manually. |
-| `[Right/Left] Occupied Pressure`   | Number (Pressure %) [0% -> 100%] | Indicates the sensor value when the bed is occupied. Used for calculating the ideal `[Right/Left] Trigger Pressure`. The calibration process will set this value, but it can also be adjusted manually. |
+| `[Right/Left] Trigger Pressure`    | Number (Pressure %) [0% ⇒ 100%] | When `[Right/Left] Pressure` is above this value, `[Right/Left] Bed Occupied` will register **Detected**. The calibration process will set this value, but it can also be adjusted manually. |
+| `[Right/Left] Unoccupied Pressure` | Number (Pressure %) [0% ⇒ 100%] | Indicates the sensor value when the bed is unoccupied. Used for calculating the ideal `[Right/Left] Trigger Pressure`. The calibration process will set this value, but it can also be adjust manually. |
+| `[Right/Left] Occupied Pressure`   | Number (Pressure %) [0% ⇒ 100%] | Indicates the sensor value when the bed is occupied. Used for calculating the ideal `[Right/Left] Trigger Pressure`. The calibration process will set this value, but it can also be adjusted manually. |
 
 ## Calibration