Skip to content

Latest commit

 

History

History
265 lines (164 loc) · 11.5 KB

README.md

File metadata and controls

265 lines (164 loc) · 11.5 KB
Raw

Whole Cell Model - Escherichia coli

This repository contains work to date on the Covert Lab's Whole Cell Model for Escherichia coli, as well as some effort to create a framework for building whole cell models in general.

You can reach us at AllenCenterCovertLab.

Setup

See docs/README.md for docs on how to set up and run the model.

In short, there are two alternative ways to set up to run the model: in a Docker container or in a pyenv Python virtual environment. Docker containers are easier to build and isolated from your development computer, but they run slower. (PyCharm should support debugging into a Docker container but we haven't tested that.) pyenv virtual environments take more steps to build and depend on your computer's OS, but are lighter weight and easier for debugging.

Quick start

When running this code, prepare with these steps (the wcm-code Docker container already prepares this for you):

  1. cd to the top level of your wcEcoli directory.

  2. Set the $PYTHONPATH:

    export PYTHONPATH="$PWD"

  3. In the wcEcoli directory, compile the Cython code:

    make clean compile

Ways to run the model:

  1. Use the manual runscripts.

    They run each step directly in-process, which is particularly handy to use with a debugger. But you're responsible for properly sequencing all the steps: parameter calculation, cell simulation generations, and analyses. The manual runscripts work with a Docker container and also with a pyenv virtual environment.

  2. Queue up a Fireworks workflow, then run it.

    You configure it for the desired variants, number of generations, and other options, then Fireworks will automatically run all the steps including parameter calculation, simulations, and all the analysis plots.

    The workflow tasks can be distributed over multiple processes or even multiple computers, but they must all access a shared file system such as NFS and the (or copies of the) pyenv virtual environment. We have not tested Fireworks with Docker containers.

  3. Run on the Google Cloud Platform using Docker containers and our custom workflow software.

  4. Use the multi-scale agent-based framework.

    This can run several cells interactively on a simulated microscope slide.

Using the manual runscripts

These scripts will:

  • run the parameter calculator (ParCa),
  • run cell simulations, and
  • run analysis plots

All these steps run directly, in-process, without any workflow software or MongoDB. This is handy for development, e.g. running under the PyCharm debugger. But you're responsible for running the scripts in order and for re-running the ParCa after relevant code changes.

You can run just the parts you want and rerun them as needed but the manual scripts don't automate dependency management. It's on you to rerun code if things change, runSim before analysis, or delete runSim output before running it again. (That last part should be improved! Also note that some analysis scripts get confused if the sim runs are more varied than expected. See Issue #199.)

These scripts have command line interfaces built on argparse, so you can use shorter option names as long as they're unambiguous, and also one-letter forms so you can use --cpus 8, or --cpu 8, or -c8.

NOTE: Use the -h or --help switch to get complete, up-to-date documentation on the command line options. Below are just some of the command line options.

To run the parameter calculator (ParCa), which is needed to prepare data for the simulation:

python runscripts/manual/runParca.py [-h] [--cpus CPUS] [--cached] [sim_outdir]

To simulate one or more cell generations with optional variants:

python runscripts/manual/runSim.py [-h] [--variant VARIANT_TYPE FIRST_INDEX LAST_INDEX] [--generations GENERATIONS] [--seed SEED] [sim_dir]

To run the analysis plots on the simulation output in a given sim_dir (use the -h parameter to get complete help on the command line options):

python runscripts/manual/analysisVariant.py [-h] [--plot PLOT [PLOT ...]] [--cpus CPUS] [sim_dir]

python runscripts/manual/analysisCohort.py [-h] [--plot PLOT [PLOT ...]] [--cpus CPUS] [--variant-index VARIANT_INDEX] [sim_dir]

python runscripts/manual/analysisMultigen.py [-h] [--plot PLOT [PLOT ...]] [--cpus CPUS] [--variant-index VARIANT_INDEX] [--seed SEED] [sim_dir]

python runscripts/manual/analysisSingle.py [-h] [--plot PLOT [PLOT ...]] [--cpus CPUS] [--variant-index VARIANT_INDEX] [--seed SEED] [--generation GENERATION] [--daughter DAUGHTER] [sim_dir]

If you default the analysis parameters, these scripts will pick the latest simulation directory, the first variant, the first generation, and so on. To get full analyses across all variants, generations, etc., run:

  • analysisVariant.py
  • analysisCohort.py for each --variant_index you simulated
  • analysisMultigen.py for each combination of --variant_index and --seed you simulated
  • analysisSingle.py for each combination of --variant_index, --seed, and --generation you simulated

The --plot (or -p) optional parameter lets you pick one or more specific PLOTS to run. The list of PLOTs can include analysis class filenames like aaCounts (or aaCounts.py) and analysis group TAGS like CORE. See the __init__.py file in each analysis class directory for the available analysis classes and group TAGS. The default is to run the CORE group of plots that are recommended for everyday development.

For example, to run two analysis plots on simulation variant #3 and put a filename prefix "v3_" on their output files (to distinguish them from other analysis runs):

python runscripts/manual/analysisCohort.py --plot compositionFitting.py figure2e.py --variant_index 3 --output_prefix v3_

Set the environment variable DEBUG_GC=1 if you want to check for Python memory leaks when running the analysis plots.

There's another way run an individual analysis plot:

python models/ecoli/analysis/cohort/transcriptFrequency.py [-h] [--verbose] [-o OUTPUT_PREFIX] [-v VARIANT_INDEX] [sim_dir]

Causality

After running a simulation, you can explore the Causality visualization tool (see CovertLab/causality) to examine the model's causal links and simulation output correlations.

Running a Fireworks workflow

See wholecell/fireworks/README.md for instructions to set up MongoDB as needed to run Fireworks.

The command line program fw_queue.py queues up a Fireworks workflow including parameter calculations, the simulation itself, and analysis plots.

The fw_queue.py source code begins with documentation on its many options. The options are set via environment variables. Below are a few usage examples.

But first, note that you can reset the Fireworks queue (if needed) via:

lpad reset

Single simulation

To queue up a single simulation in Fireworks, including parameter calculations and analysis plots:

DESC="Example run of a single simulation." python runscripts/fireworks/fw_queue.py

The DESC text should be more descriptive than this so you can readily distinguish your runs.

Multiple simulations

To queue multiple simulations, e.g. 4 simulations, each with a different initial seed:

DESC="Example run of multiple simulations." N_INIT_SIMS=4 python runscripts/fireworks/fw_queue.py

Multiple generations

To queue multiple generations, e.g. 4 generations from a single mother cell:

DESC="Example run of multiple generations." N_GENS=4 python runscripts/fireworks/fw_queue.py

To queue multiple generations (in this case 3 generations) from multiple mother cells (in this case 2 mother cells:

DESC="Example run of multiple generations from multiple mother cells." N_GENS=3 N_INIT_SIMS=2 python runscripts/fireworks/fw_queue.py

Shifting media conditions

To queue a simulation that switches between environments, use the "timeline" variant and give the range of indices (in this case from 1 to 1) specifying conditions defined in wcEcoli/environment/condition/timelines:

DESC="Example run of nutrient shifts." VARIANT="timeline" FIRST_VARIANT_INDEX=1 LAST_VARIANT_INDEX=1 python runscripts/fireworks/fw_queue.py

Using the cached sim data object

To use the cached sim data file, set the CACHED_SIM_DATA environment variable (TODO: Explain what creates a cached sim data file):

DESC="Example run with cached sim data." CACHED_SIM_DATA=1 python runscripts/fireworks/fw_queue.py

Using an interactive Sherlock node to run a Fireworks workflow

To run queued simulations on an interactive Sherlock node:

rlaunch rapidfire

You probably only want to do this if you're running or debugging a single simulation (one initial seed, generation, and variant).

Don't do this on a Sherlock login node.

Using the SLURM scheduler on Linux to run a Fireworks workflow

To run simulations on a Sherlock cluster (helpful when running more than one simulation):

qlaunch -r rapidfire --nlaunches infinite --sleep 5

The qlaunch command will run forever. Hit Ctrl-C to kill it once the console logs shows that all the simulation and analysis steps have finished.

qlaunch is relatively lightweight, so it might work on a Sherlock login node.

qlaunch will create block directories with stdout and stderr from each Firework. To troubleshoot any errors or just to see the output you would normally see from an interactive session, use the following commands to search the block directories for your desired fw_id:

./runscripts/fw_info.sh out 1
./runscripts/fw_info.sh error 1

This will display the stdout and stderr from the execution of a firework with fw_id of 1.

Output

The output is stored as a time-stamped sub-directory of the out directory, for example out/20180703.215222.029168__multi-sim/, where DESC="multi-sim" was one of the arguments to fw_queue.py.

Within this directory, there is a metadata sub-directory which stores the git revision information as well as the description provided by the DESC variable, a kb sub-directory which stores kb objects (after the simulations and analysis are done the objects are compressed using bzip2), and sub-directories (maybe only a single sub-directory) containing different variants (e.g., gene knockouts or other perturbations).

Within variant sub-directories, there are N_INIT_SIMS (which defaults to 1) numbered sub-directories such as 000000 corresponding to "family trees".

Within each "family tree" sub-directory are generation sub-directories such as generation_000000.

Within each generation sub-directory are numbered individual simulation directories that contain simOut (for simulation data) and plotOut (for plots) sub-directories.

A family tree for 3 generations showing the relationship between numbered individual simulations is shown here:

gen 0:                 0
gen 1:         0               1
gen 2:     0       1       2       3

Google Cloud Platform

You can run wcEcoli cell simulations on the Google Cloud Platform using Docker containers and our custom workflow software.

NOTE: So far the documentation assumes you're part of the Covert lab and able to access our Allen Discovery Center project on Google Cloud Platform.

See How to run the Whole Cell Model on the Google Cloud Platform.