SapphineMinimal.rpt

## Footprint report - date 5/18/2020 12:36:58 PM
## Created by Pcbnew version kicad (5.1.5)-3
## Unit = inches, Angle = deg.

$BeginDESCRIPTION

$BOARD
upper_left_corner  2.514276  2.511500
lower_right_corner  5.714483  5.128394
$EndBOARD

$MODULE "R533"
reference "R533"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.525000  3.350000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R533

$MODULE "R532"
reference "R532"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.525000  3.425000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R532

$MODULE "J502"
reference "J502"
value "Conn_01x03_Male"
footprint "Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical"
attribut none
position  4.050000  4.175000  orientation 90.00
layer front
$PAD "3"
Shape Oval Layer both
position  0.000000  0.100000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Oval Layer both
position  0.000000  0.050000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer both
position  0.000000  0.000000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J502

$MODULE "J507"
reference "J507"
value "Conn_01x03_Male"
footprint "Connector_PinSocket_1.27mm:PinSocket_1x03_P1.27mm_Vertical"
attribut none
position  3.275000  3.225000  orientation 0.00
layer front
$PAD "3"
Shape Oval Layer both
position  0.000000  0.100000  size  0.039370  0.039370  orientation 0.00
drill  0.027559
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Oval Layer both
position  0.000000  0.050000  size  0.039370  0.039370  orientation 0.00
drill  0.027559
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer both
position  0.000000  0.000000  size  0.039370  0.039370  orientation 0.00
drill  0.027559
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J507

$MODULE "J702"
reference "J702"
value "Conn_01x01_Male"
footprint "Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical"
attribut none
position  3.750000  4.075000  orientation 0.00
layer front
$PAD "1"
Shape Rect Layer both
position  0.000000  0.000000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J702

$MODULE "R531"
reference "R531"
value "2K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.275000  4.200000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R531

$MODULE "TP503"
reference "TP503"
value "TestPoint"
footprint "TestPoint:TestPoint_Pad_D2.0mm"
attribut virtual
position  3.150000  4.800000  orientation 180.00
layer back
$PAD "1"
Shape Circle Layer back
position  0.000000  0.000000  size  0.078740  0.078740  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  TP503

$MODULE "TP502"
reference "TP502"
value "TestPoint"
footprint "TestPoint:TestPoint_Pad_D2.0mm"
attribut virtual
position  3.325000  4.800000  orientation 180.00
layer back
$PAD "1"
Shape Circle Layer back
position  0.000000  0.000000  size  0.078740  0.078740  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  TP502

$MODULE "TP501"
reference "TP501"
value "TestPoint"
footprint "TestPoint:TestPoint_Pad_D2.0mm"
attribut virtual
position  3.500000  4.800000  orientation 180.00
layer back
$PAD "1"
Shape Circle Layer back
position  0.000000  0.000000  size  0.078740  0.078740  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  TP501

$MODULE "SW601"
reference "SW601"
value "SW_Push_Dual"
footprint "SapphineMinimal:SW_PTS810_SJM_250_SMTR_LFS"
attribut none
position  4.100000  4.550000  orientation 0.00
layer front
$PAD "4"
Shape Rect Layer front
position  0.081693  0.042323  size  0.041339  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position -0.081693  0.042323  size  0.041339  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer front
position  0.081693 -0.042323  size  0.041339  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer front
position -0.081693 -0.042323  size  0.041339  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  SW601

$MODULE "SW501"
reference "SW501"
value "SW_Push_Dual"
footprint "SapphineMinimal:SW_PTS810_SJM_250_SMTR_LFS"
attribut none
position  4.100000  4.375000  orientation 0.00
layer front
$PAD "4"
Shape Rect Layer front
position  0.081693  0.042323  size  0.041339  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position -0.081693  0.042323  size  0.041339  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer front
position  0.081693 -0.042323  size  0.041339  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer front
position -0.081693 -0.042323  size  0.041339  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  SW501

$MODULE "U501"
reference "U501"
value "ATSAMD21E18A-AUT"
footprint "Package_QFP:TQFP-32_7x7mm_P0.8mm"
attribut smd
position  4.169619  3.673074  orientation 0.00
layer front
$PAD "32"
Shape Rect Layer front
position -0.110236 -0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "31"
Shape Rect Layer front
position -0.078740 -0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "30"
Shape Rect Layer front
position -0.047244 -0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "29"
Shape Rect Layer front
position -0.015748 -0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "28"
Shape Rect Layer front
position  0.015748 -0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "27"
Shape Rect Layer front
position  0.047244 -0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "26"
Shape Rect Layer front
position  0.078740 -0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "25"
Shape Rect Layer front
position  0.110236 -0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "24"
Shape Rect Layer front
position  0.167323 -0.110236  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "23"
Shape Rect Layer front
position  0.167323 -0.078740  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "22"
Shape Rect Layer front
position  0.167323 -0.047244  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "21"
Shape Rect Layer front
position  0.167323 -0.015748  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "20"
Shape Rect Layer front
position  0.167323  0.015748  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "19"
Shape Rect Layer front
position  0.167323  0.047244  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "18"
Shape Rect Layer front
position  0.167323  0.078740  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "17"
Shape Rect Layer front
position  0.167323  0.110236  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "16"
Shape Rect Layer front
position  0.110236  0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "15"
Shape Rect Layer front
position  0.078740  0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "14"
Shape Rect Layer front
position  0.047244  0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "13"
Shape Rect Layer front
position  0.015748  0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "12"
Shape Rect Layer front
position -0.015748  0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "11"
Shape Rect Layer front
position -0.047244  0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "10"
Shape Rect Layer front
position -0.078740  0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "9"
Shape Rect Layer front
position -0.110236  0.167323  size  0.062992  0.021654  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "8"
Shape Rect Layer front
position -0.167323  0.110236  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "7"
Shape Rect Layer front
position -0.167323  0.078740  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Rect Layer front
position -0.167323  0.047244  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Rect Layer front
position -0.167323  0.015748  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Rect Layer front
position -0.167323 -0.015748  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer front
position -0.167323 -0.047244  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position -0.167323 -0.078740  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer front
position -0.167323 -0.110236  size  0.062992  0.021654  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U501

$MODULE "R604"
reference "R604"
value "47K5"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.900000  3.650000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R604

$MODULE "R530"
reference "R530"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.850000  3.350000  orientation 90.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R530

$MODULE "R529"
reference "R529"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.950000  3.350000  orientation 90.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R529

$MODULE "R528"
reference "R528"
value "47K5"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.900000  4.400000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R528

$MODULE "J701"
reference "J701"
value "Conn_01x04_Male"
footprint "Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal"
attribut smd
position  4.100000  4.775000  orientation 0.00
layer front
$PAD "MP"
Shape Roundrect Layer front
position  0.110236  0.073819  size  0.047244  0.070866  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "MP"
Shape Roundrect Layer front
position -0.110236  0.073819  size  0.047244  0.070866  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Roundrect Layer front
position  0.059055 -0.078740  size  0.023622  0.061024  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Roundrect Layer front
position  0.019685 -0.078740  size  0.023622  0.061024  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Roundrect Layer front
position -0.019685 -0.078740  size  0.023622  0.061024  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.059055 -0.078740  size  0.023622  0.061024  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J701

$MODULE "J505"
reference "J505"
value "Conn_01x13_Female"
footprint "Connector_PinSocket_2.54mm:PinSocket_1x13_P2.54mm_Vertical"
attribut none
position  3.100000  2.700000  orientation 0.00
layer front
$PAD "13"
Shape Oval Layer both
position  0.000000  1.200000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "12"
Shape Oval Layer both
position  0.000000  1.100000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "11"
Shape Oval Layer both
position  0.000000  1.000000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "10"
Shape Oval Layer both
position  0.000000  0.900000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "9"
Shape Oval Layer both
position  0.000000  0.800000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "8"
Shape Oval Layer both
position  0.000000  0.700000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "7"
Shape Oval Layer both
position  0.000000  0.600000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Oval Layer both
position  0.000000  0.500000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Oval Layer both
position  0.000000  0.400000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Oval Layer both
position  0.000000  0.300000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Oval Layer both
position  0.000000  0.200000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Oval Layer both
position  0.000000  0.100000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer both
position  0.000000  0.000000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J505

$MODULE "C401"
reference "C401"
value "22uF"
footprint "Capacitor_SMD:C_1206_3216Metric"
attribut smd
position  3.975000  2.950000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C401

$MODULE "R527"
reference "R527"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.820000  3.510000  orientation 180.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R527

$MODULE "R526"
reference "R526"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.800000  3.740000  orientation 180.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R526

$MODULE "C206"
reference "C206"
value "10uF"
footprint "Capacitor_SMD:CP_Elec_4x5.4"
attribut smd
position  4.575000  4.425000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.070866  0.000000  size  0.102362  0.062992  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.070866  0.000000  size  0.102362  0.062992  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C206

$MODULE "C203"
reference "C203"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  4.375000  4.650000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C203

$MODULE "R404"
reference "R404"
value "47K5"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.025000  2.825000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R404

$MODULE "C703"
reference "C703"
value "22uF"
footprint "Capacitor_SMD:C_1206_3216Metric"
attribut smd
position  3.650000  4.625000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C703

$MODULE "C501"
reference "C501"
value "22uF"
footprint "Capacitor_SMD:C_1206_3216Metric"
attribut smd
position  4.160000  3.710000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C501

$MODULE "C301"
reference "C301"
value "22uF"
footprint "Capacitor_SMD:C_1206_3216Metric"
attribut smd
position  4.700000  2.825000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C301

$MODULE "C205"
reference "C205"
value "22uF"
footprint "Capacitor_SMD:C_1206_3216Metric"
attribut smd
position  4.525000  4.775000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C205

$MODULE "D502"
reference "D502"
value "RED LED"
footprint "LED_SMD:LED_0805_2012Metric"
attribut smd
position  3.200000  4.100000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  D502

$MODULE "R525"
reference "R525"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.220000  4.010000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R525

$MODULE "R524"
reference "R524"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.060000  4.010000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R524

$MODULE "R523"
reference "R523"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.300000  4.010000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R523

$MODULE "R522"
reference "R522"
value "2K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.140000  4.010000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R522

$MODULE "R521"
reference "R521"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.525000  3.500000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R521

$MODULE "R520"
reference "R520"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.520000  3.670000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R520

$MODULE "R519"
reference "R519"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.520000  3.830000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R519

$MODULE "R518"
reference "R518"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.460000  4.010000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R518

$MODULE "R517"
reference "R517"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.375000  3.350000  orientation 90.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R517

$MODULE "R516"
reference "R516"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.275000  3.350000  orientation 90.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R516

$MODULE "R515"
reference "R515"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.520000  3.590000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R515

$MODULE "R514"
reference "R514"
value "2K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.520000  3.750000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R514

$MODULE "R513"
reference "R513"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.520000  3.910000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R513

$MODULE "R512"
reference "R512"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.380000  4.010000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R512

$MODULE "R511"
reference "R511"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.820000  3.580000  orientation 180.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R511

$MODULE "J504"
reference "J504"
value "Conn_01x08_Male"
footprint "Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical"
attribut none
position  4.400000  4.200000  orientation 90.00
layer front
$PAD "8"
Shape Oval Layer both
position  0.000000  0.700000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "7"
Shape Oval Layer both
position  0.000000  0.600000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Oval Layer both
position  0.000000  0.500000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Oval Layer both
position  0.000000  0.400000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Oval Layer both
position  0.000000  0.300000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Oval Layer both
position  0.000000  0.200000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Oval Layer both
position  0.000000  0.100000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer both
position  0.000000  0.000000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J504

$MODULE "J506"
reference "J506"
value "Conn_01x08_Male"
footprint "Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical"
attribut none
position  4.400000  4.900000  orientation 90.00
layer front
$PAD "8"
Shape Oval Layer both
position  0.000000  0.700000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "7"
Shape Oval Layer both
position  0.000000  0.600000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Oval Layer both
position  0.000000  0.500000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Oval Layer both
position  0.000000  0.400000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Oval Layer both
position  0.000000  0.300000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Oval Layer both
position  0.000000  0.200000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Oval Layer both
position  0.000000  0.100000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer both
position  0.000000  0.000000  size  0.066929  0.066929  orientation 0.00
drill  0.039370
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J506

$MODULE "C303"
reference "C303"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  4.950000  2.800000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C303

$MODULE "U702"
reference "U702"
value "TPS22929D"
footprint "Package_TO_SOT_SMD:SOT-23-6"
attribut smd
position  3.650000  4.475000  orientation 0.00
layer back
$PAD "5"
Shape Rect Layer back
position  0.043307  0.000000  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Rect Layer back
position  0.043307  0.037402  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Rect Layer back
position  0.043307 -0.037402  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer back
position -0.043307 -0.037402  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer back
position -0.043307  0.000000  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer back
position -0.043307  0.037402  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U702

$MODULE "U601"
reference "U601"
value "DS3231SN"
footprint "Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm"
attribut smd
position  4.940000  3.700000  orientation 0.00
layer front
$PAD "16"
Shape Roundrect Layer front
position  0.183071 -0.175000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "15"
Shape Roundrect Layer front
position  0.183071 -0.125000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "14"
Shape Roundrect Layer front
position  0.183071 -0.075000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "13"
Shape Roundrect Layer front
position  0.183071 -0.025000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "12"
Shape Roundrect Layer front
position  0.183071  0.025000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "11"
Shape Roundrect Layer front
position  0.183071  0.075000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "10"
Shape Roundrect Layer front
position  0.183071  0.125000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "9"
Shape Roundrect Layer front
position  0.183071  0.175000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "8"
Shape Roundrect Layer front
position -0.183071  0.175000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "7"
Shape Roundrect Layer front
position -0.183071  0.125000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Roundrect Layer front
position -0.183071  0.075000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Roundrect Layer front
position -0.183071  0.025000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Roundrect Layer front
position -0.183071 -0.025000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Roundrect Layer front
position -0.183071 -0.075000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Roundrect Layer front
position -0.183071 -0.125000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.183071 -0.175000  size  0.080709  0.023622  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U601

$MODULE "U401"
reference "U401"
value "TPS22929D"
footprint "Package_TO_SOT_SMD:SOT-23-6"
attribut smd
position  3.985000  3.090000  orientation 180.00
layer back
$PAD "5"
Shape Rect Layer back
position  0.043307  0.000000  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Rect Layer back
position  0.043307  0.037402  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Rect Layer back
position  0.043307 -0.037402  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer back
position -0.043307 -0.037402  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer back
position -0.043307  0.000000  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer back
position -0.043307  0.037402  size  0.041732  0.025591  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U401

$MODULE "U201"
reference "U201"
value "TPS82150"
footprint "geo_sci_SMU:TPS82130SILT"
attribut smd
position  4.525000  4.650000  orientation 0.00
layer front
$PAD "9"
Shape Rect Layer front
position  0.000000  0.000000  size  0.046244  0.078740  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "8"
Shape Rect Layer front
position  0.041339 -0.038386  size  0.016142  0.020079  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "7"
Shape Rect Layer front
position  0.041339 -0.012795  size  0.016142  0.020079  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Rect Layer front
position  0.041339  0.012795  size  0.016142  0.020079  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Rect Layer front
position  0.041339  0.038386  size  0.016142  0.020079  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Rect Layer front
position -0.041339  0.038386  size  0.016142  0.020079  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer front
position -0.041339  0.012795  size  0.016142  0.020079  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position -0.041339 -0.012795  size  0.016142  0.020079  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer front
position -0.041339 -0.038386  size  0.016142  0.020079  orientation 90.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U201

$MODULE "R705"
reference "R705"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.350000  4.250000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R705

$MODULE "R704"
reference "R704"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.800000  3.970000  orientation 180.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R704

$MODULE "R703"
reference "R703"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.750000  4.175000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R703

$MODULE "R701"
reference "R701"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.800000  3.890000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R701

$MODULE "R603"
reference "R603"
value "47K5"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.756004  3.400000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R603

$MODULE "R602"
reference "R602"
value "4K75"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  5.056004  3.400000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R602

$MODULE "R601"
reference "R601"
value "4K75"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.900000  3.400000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R601

$MODULE "R510"
reference "R510"
value "47K5"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.640000  3.900000  orientation 180.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R510

$MODULE "R509"
reference "R509"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.800000  3.810000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R509

$MODULE "R508"
reference "R508"
value "4K75"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.375000  2.825000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R508

$MODULE "R507"
reference "R507"
value "2K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.150000  4.345000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R507

$MODULE "R506"
reference "R506"
value "2K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.150000  4.450000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R506

$MODULE "R505"
reference "R505"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.640000  3.790000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R505

$MODULE "R504"
reference "R504"
value "2K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.150000  4.550000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R504

$MODULE "R503"
reference "R503"
value "47K5"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.325000  3.450000  orientation 180.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R503

$MODULE "R502"
reference "R502"
value "47K5"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.325000  3.525000  orientation 180.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R502

$MODULE "R501"
reference "R501"
value "2K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.155000  4.245000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R501

$MODULE "R403"
reference "R403"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.425000  2.925000  orientation 90.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R403

$MODULE "R402"
reference "R402"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.925000  2.825000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R402

$MODULE "R401"
reference "R401"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.985000  3.210000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R401

$MODULE "R302"
reference "R302"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.525000  2.800000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R302

$MODULE "R301"
reference "R301"
value "47"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.600000  2.800000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R301

$MODULE "R211"
reference "R211"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.625000  4.600000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R211

$MODULE "R210"
reference "R210"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.625000  4.525000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R210

$MODULE "R209"
reference "R209"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.625000  4.450000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R209

$MODULE "R208"
reference "R208"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.625000  4.375000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R208

$MODULE "R207"
reference "R207"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.400000  4.325000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R207

$MODULE "R206"
reference "R206"
value "47K5"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.875000  4.375000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R206

$MODULE "R205"
reference "R205"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.875000  4.475000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R205

$MODULE "R204"
reference "R204"
value "100K"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.875000  4.575000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R204

$MODULE "Q202"
reference "Q202"
value "IRLML6402TRPBF"
footprint "Package_TO_SOT_SMD:SOT-23"
attribut smd
position  5.050000  4.375000  orientation 0.00
layer back
$PAD "3"
Shape Rect Layer back
position  0.039370  0.000000  size  0.035433  0.031496  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer back
position -0.039370 -0.037402  size  0.035433  0.031496  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer back
position -0.039370  0.037402  size  0.035433  0.031496  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  Q202

$MODULE "Q201"
reference "Q201"
value "BC857BS"
footprint "Package_TO_SOT_SMD:SOT-363_SC-70-6"
attribut smd
position  5.050000  4.700000  orientation 180.00
layer back
$PAD "6"
Shape Rect Layer back
position  0.037402  0.025591  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Rect Layer back
position  0.037402 -0.025591  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer back
position -0.037402  0.000000  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Rect Layer back
position  0.037402  0.000000  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer back
position -0.037402 -0.025591  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer back
position -0.037402  0.025591  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  Q201

$MODULE "J503"
reference "J503"
value "USB_B_Micro"
footprint "Connector_USB:USB_Micro-B_GCT_USB3076-30-A"
attribut smd
position  3.650000  2.800000  orientation 180.00
layer front
$PAD "6"
Shape Rect Layer front
position -0.091339 -0.040551  size  0.045276  0.057087  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Rect Layer front
position  0.091339 -0.040551  size  0.045276  0.057087  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Oval Layer both
position  0.140748  0.047244  size  0.041339  0.074803  orientation 0.00
drill  0.017717
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Oval Layer both
position -0.140748  0.047244  size  0.041339  0.074803  orientation -180.00
drill  0.017717
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Rect Layer front
position -0.044291  0.047244  size  0.068898  0.074803  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer front
position  0.000000 -0.057087  size  0.015748  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Rect Layer front
position  0.025591 -0.057087  size  0.015748  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Rect Layer front
position  0.051181 -0.057087  size  0.015748  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer front
position -0.051181 -0.057087  size  0.015748  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position -0.025591 -0.057087  size  0.015748  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Rect Layer front
position  0.044291  0.047244  size  0.068898  0.074803  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J503

$MODULE "J501"
reference "J501"
value "Conn_02x05_Odd_Even"
footprint "Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical"
attribut none
position  3.300000  3.725000  orientation 0.00
layer front
$PAD "1"
Shape Rect Layer both
position  0.000000  0.000000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Oval Layer both
position  0.050000  0.000000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Oval Layer both
position  0.000000  0.050000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Oval Layer both
position  0.050000  0.050000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Oval Layer both
position  0.000000  0.100000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Oval Layer both
position  0.050000  0.100000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "7"
Shape Oval Layer both
position  0.000000  0.150000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "8"
Shape Oval Layer both
position  0.050000  0.150000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "9"
Shape Oval Layer both
position  0.000000  0.200000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$PAD "10"
Shape Oval Layer both
position  0.050000  0.200000  size  0.039370  0.039370  orientation 0.00
drill  0.025591
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J501

$MODULE "J401"
reference "J401"
value "MicroSD socket w/ switch"
footprint "SapphineMinimal:MicroSD_2908-05WB-MG"
attribut smd
position  4.100000  2.800000  orientation 0.00
layer front
$PAD "11"
Shape Rect Layer front
position -0.183465 -0.151575  size  0.055118  0.074803  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "11"
Shape Rect Layer front
position  0.348425 -0.112205  size  0.055118  0.074803  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "9"
Shape Rect Layer front
position  0.271260  0.405512  size  0.070866  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "10"
Shape Rect Layer front
position  0.046850  0.405512  size  0.070866  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "8"
Shape Rect Layer front
position  0.303150  0.000000  size  0.031496  0.059055  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "7"
Shape Rect Layer front
position  0.259843  0.000000  size  0.031496  0.059055  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Rect Layer front
position  0.216535 -0.007874  size  0.031496  0.059055  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Rect Layer front
position  0.173228  0.000000  size  0.031496  0.059055  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Rect Layer front
position  0.129921 -0.007874  size  0.031496  0.059055  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer front
position  0.086614  0.000000  size  0.031496  0.059055  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.043307  0.015748  size  0.031496  0.059055  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer front
position  0.000000  0.000000  size  0.031496  0.059055  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J401

$MODULE "J201"
reference "J201"
value "JST"
footprint "Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal"
attribut smd
position  4.925000  4.550000  orientation 90.00
layer front
$PAD "MP"
Shape Roundrect Layer front
position  0.131890  0.114173  size  0.059055  0.133858  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "MP"
Shape Roundrect Layer front
position -0.131890  0.114173  size  0.059055  0.133858  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Roundrect Layer front
position  0.039370 -0.112205  size  0.039370  0.137795  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.039370 -0.112205  size  0.039370  0.137795  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J201

$MODULE "IC301"
reference "IC301"
value "DLHR-F50D-E1BD-C-NAV8"
footprint "SapphineMinimal:DLHRF50DE1BDCNAV8"
attribut none
position  5.050000  2.675000  orientation 180.00
layer front
$PAD "8"
Shape Circle Layer both
position  0.000000 -0.629921  size  0.047913  0.047913  orientation 0.00
drill  0.027953
shape_offset  0.000000  0.000000
$EndPAD
$PAD "7"
Shape Circle Layer both
position  0.100000 -0.629921  size  0.047913  0.047913  orientation 0.00
drill  0.027953
shape_offset  0.000000  0.000000
$EndPAD
$PAD "6"
Shape Circle Layer both
position  0.200000 -0.629921  size  0.047913  0.047913  orientation 0.00
drill  0.027953
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Circle Layer both
position  0.300000 -0.629921  size  0.047913  0.047913  orientation 0.00
drill  0.027953
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Circle Layer both
position  0.300000  0.000000  size  0.047913  0.047913  orientation 0.00
drill  0.027953
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Circle Layer both
position  0.200000  0.000000  size  0.047913  0.047913  orientation 0.00
drill  0.027953
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Circle Layer both
position  0.100000  0.000000  size  0.047913  0.047913  orientation 0.00
drill  0.027953
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer both
position  0.000000  0.000000  size  0.047913  0.047913  orientation 0.00
drill  0.027953
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  IC301

$MODULE "FB702"
reference "FB702"
value "600"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.150000  4.550000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  FB702

$MODULE "FB701"
reference "FB701"
value "600"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.075000  4.550000  orientation 90.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  FB701

$MODULE "FB501"
reference "FB501"
value "600"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  3.900000  4.010000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  FB501

$MODULE "FB301"
reference "FB301"
value "600"
footprint "Resistor_SMD:R_0603_1608Metric"
attribut smd
position  4.875000  2.800000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  FB301

$MODULE "D504"
reference "D504"
value "GREEN LED"
footprint "LED_SMD:LED_0805_2012Metric"
attribut smd
position  3.100000  4.100000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  D504

$MODULE "D501"
reference "D501"
value "RED LED"
footprint "LED_SMD:LED_0805_2012Metric"
attribut smd
position  3.300000  4.100000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  D501

$MODULE "D201"
reference "D201"
value "MBR180"
footprint "Diode_SMD:D_SOD-123"
attribut smd
position  4.350000  4.550000  orientation 0.00
layer back
$PAD "2"
Shape Rect Layer back
position  0.064961  0.000000  size  0.035433  0.047244  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer back
position -0.064961  0.000000  size  0.035433  0.047244  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  D201

$MODULE "CR501"
reference "CR501"
value "TPD4E1U06DCKR"
footprint "Package_TO_SOT_SMD:SOT-363_SC-70-6"
attribut smd
position  3.650000  3.125000  orientation 180.00
layer back
$PAD "6"
Shape Rect Layer back
position  0.037402  0.025591  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Rect Layer back
position  0.037402 -0.025591  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer back
position -0.037402  0.000000  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Rect Layer back
position  0.037402  0.000000  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer back
position -0.037402 -0.025591  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer back
position -0.037402  0.025591  size  0.025591  0.015748  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  CR501

$MODULE "C702"
reference "C702"
value "1uF"
footprint "Capacitor_SMD:C_0805_2012Metric"
attribut smd
position  3.900000  4.550000  orientation 90.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C702

$MODULE "C701"
reference "C701"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  4.000000  4.550000  orientation 90.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C701

$MODULE "C602"
reference "C602"
value "1uF"
footprint "Capacitor_SMD:C_0805_2012Metric"
attribut smd
position  4.900000  3.500000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C602

$MODULE "C601"
reference "C601"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  4.900000  3.575000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C601

$MODULE "C512"
reference "C512"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  3.375000  2.725000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C512

$MODULE "C510"
reference "C510"
value "1uF"
footprint "Capacitor_SMD:C_0805_2012Metric"
attribut smd
position  3.810000  3.660000  orientation 180.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C510

$MODULE "C509"
reference "C509"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  3.325000  3.600000  orientation 0.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C509

$MODULE "C505"
reference "C505"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  4.180000  3.350000  orientation 90.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C505

$MODULE "C504"
reference "C504"
value "1uF"
footprint "Capacitor_SMD:C_0805_2012Metric"
attribut smd
position  4.050000  3.350000  orientation 90.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C504

$MODULE "C503"
reference "C503"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  3.980000  4.010000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C503

$MODULE "C502"
reference "C502"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  4.160000  3.630000  orientation 0.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C502

$MODULE "C403"
reference "C403"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  4.200000  2.925000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C403

$MODULE "C402"
reference "C402"
value "1uF"
footprint "Capacitor_SMD:C_0805_2012Metric"
attribut smd
position  4.275000  2.925000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.036909  0.000000  size  0.038386  0.055118  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C402

$MODULE "C302"
reference "C302"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  4.800000  2.800000  orientation 270.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C302

$MODULE "C204"
reference "C204"
value "4.7nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  4.650000  4.650000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C204

$MODULE "C202"
reference "C202"
value "100nF"
footprint "Capacitor_SMD:C_0603_1608Metric"
attribut smd
position  4.375000  4.665000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.031004  0.000000  size  0.034449  0.037402  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C202

$MODULE "C201"
reference "C201"
value "10uF"
footprint "Capacitor_SMD:C_1206_3216Metric"
attribut smd
position  4.350000  4.425000  orientation 180.00
layer back
$PAD "2"
Shape Roundrect Layer back
position  0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer back
position -0.055118  0.000000  size  0.049213  0.068898  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  C201

$EndDESCRIPTION