Skip to content

Latest commit

 

History

History
261 lines (212 loc) · 5.41 KB

build-without-conan.md

File metadata and controls

261 lines (212 loc) · 5.41 KB
Raw

Building tket and pytket without conan

It is possible to build tket (including tests) and pytket without using conan to manage the packages. This may be useful in some contexts, but is not used for official releases. The scripts below were developed for Linux and have not been tested on other platforms.

For convenience, set a few environment variables:

  • TKET_DIR: the root directory of this repo
  • INSTALL_DIR: a directory where libraries will be installed
  • TMP_DIR: a directory where external sources will be downloaded and built

Installing external dependencies

The versions should match the current requirements as specified in the relevant conanfile.py. Those specified below are correct for pytket 1.15.0.

(Some of these may be installed already in system directories.)

boost

cd ${TMP_DIR}
wget -O boost_1_86_0.tar.gz https://sourceforge.net/projects/boost/files/boost/1.86.0/boost_1_86_0.tar.gz/download
tar xzvf boost_1_86_0.tar.gz
cd boost_1_86_0/
./bootstrap.sh --prefix=${INSTALL_DIR}
./b2
./b2 install

gmp

cd ${TMP_DIR}
wget https://gmplib.org/download/gmp/gmp-6.3.0.tar.bz2
bzip2 -dk gmp-6.3.0.tar.bz2
tar xvf gmp-6.3.0.tar
cd gmp-6.3.0/
./configure --prefix=${INSTALL_DIR} --enable-cxx=yes
make
make check
make install

symengine

cd ${TMP_DIR}
wget https://github.com/symengine/symengine/archive/refs/tags/v0.13.0.tar.gz
tar xzvf v0.13.0.tar.gz
cd symengine-0.13.0/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} -DBUILD_TESTS=OFF -DBUILD_BENCHMARKS=OFF ..
cmake --build .
cmake --install .

eigen

cd ${TMP_DIR}
wget https://gitlab.com/libeigen/eigen/-/archive/3.4.0/eigen-3.4.0.tar.bz2
bzip2 -dk eigen-3.4.0.tar.bz2
tar xvf eigen-3.4.0.tar
cd eigen-3.4.0/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} ..
cmake --build .
cmake --install .

nlohmann_json

cd ${TMP_DIR}
wget https://github.com/nlohmann/json/releases/download/v3.11.3/json.tar.xz
tar xvf json.tar.xz
cd json/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} -DJSON_BuildTests=OFF ..
cmake --build .
cmake --install .

catch2 (needed for tests)

cd ${TMP_DIR}
wget https://github.com/catchorg/Catch2/archive/refs/tags/v3.7.1.tar.gz
tar xzvf v3.7.1.tar.gz
cd Catch2-3.7.1/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} ..
cmake --build .
cmake --install .

rapidcheck (needed for property tests)

cd ${TMP_DIR}
wget https://github.com/emil-e/rapidcheck/archive/1c91f40e64d87869250cfb610376c629307bf77d.zip
unzip 1c91f40e64d87869250cfb610376c629307bf77d.zip
cd rapidcheck-1c91f40e64d87869250cfb610376c629307bf77d/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} ..
cmake --build .
cmake --install .

pybind11 (needed for pytket)

cd ${TMP_DIR}
wget https://github.com/pybind/pybind11/archive/refs/tags/v2.13.6.tar.gz
tar xzvf v2.13.6.tar.gz
cd pybind11-2.13.6/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} -DPYBIND11_TEST=OFF ..
cmake --build .
cmake --install .

pybind11_json (needed for pytket)

cd ${TMP_DIR}
wget https://github.com/pybind/pybind11_json/archive/refs/tags/0.2.14.tar.gz
tar xzvf 0.2.14.tar.gz
cd pybind11_json-0.2.14/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} ..
cmake --build .
cmake --install .

TKET utility libraries

tklog

cd ${TKET_DIR}/libs/tklog/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} ..
cmake --build .
cmake --install .

tklog (shared library, needed for pytket)

cd ${TKET_DIR}/libs/tklog/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} -DBUILD_SHARED_LIBS=1 ..
cmake --build .
cmake --install .

tkrng

cd ${TKET_DIR}/libs/tkrng/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} -DCMAKE_POSITION_INDEPENDENT_CODE=ON ..
cmake --build .
cmake --install .

tkassert

cd ${TKET_DIR}/libs/tkassert/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} -DCMAKE_POSITION_INDEPENDENT_CODE=ON ..
cmake --build .
cmake --install .

tkwsm

cd ${TKET_DIR}/libs/tkwsm/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} -DCMAKE_POSITION_INDEPENDENT_CODE=ON ..
cmake --build .
cmake --install .

tktokenswap

cd ${TKET_DIR}/libs/tktokenswap/
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} -DCMAKE_POSITION_INDEPENDENT_CODE=ON ..
cmake --build .
cmake --install .

tket

cd ${TKET_DIR}/tket
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} ..
cmake --build .
cmake --install .

tket with tests and proptests

This needs the static tklog and tket libraries to be installed.

cd ${TKET_DIR}/tket/test
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} -DBUILD_TKET_TEST=ON -DBUILD_TKET_PROPTEST=ON ..
cmake --build .
cmake --install .

tket (shared library, for pytket)

cd ${TKET_DIR}/tket
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} -DBUILD_SHARED_LIBS=1 -DCMAKE_BUILD_WITH_INSTALL_RPATH=1 -DCMAKE_INSTALL_RPATH="\${ORIGIN}" ..
cmake --build .
cmake --install .

pytket

This needs the shared tklog and tket libraries to be installed.

cd ${TKET_DIR}/pytket
NO_CONAN=1 pip install -v -e .

(You can use the environment variable PYTKET_CMAKE_N_THREADS to restrict the number of threads used in the above command; otherwise one thread per CPU is used.)