collectors SNMPInterfaceCollector

SNMPInterfaceCollector

The SNMPInterfaceCollector is designed for collecting interface data from remote SNMP-enabled devices such as routers and switches using SNMP IF_MIB

Installation

The snmpinterfacecollector.py module should be installed into your Diamond installation collectors directory. This directory is defined in diamond.cfg under the collectors_path directive. This defaults to /usr/lib/diamond/collectors/ on Ubuntu.

The SNMPInterfaceCollector.cfg file should be installed into your diamond installation config directory. This directory is defined in diamond.cfg under the collectors_config_path directive. This defaults to /etc/diamond/ on Ubuntu.

Once the collector is installed and configured, you can wait for diamond to pick up the new collector automatically, or simply restart diamond.

Configuration

Below is an example configuration for the SNMPInterfaceCollector. The collector can collect data any number of devices by adding configuration sections under the devices header. By default the collector will collect every 60 seconds. This might be a bit excessive and put unnecessary load on the devices being polled. You may wish to change this to every 300 seconds. However you need modify your graphite data retentions to handle this properly.

    # Options for SNMPInterfaceCollector
    path = interface
    interval = 60

    [devices]

    [[router1]]
    host = router1.example.com
    port = 161
    community = public

    [[router2]]
    host = router1.example.com
    port = 161
    community = public

Note: If you modify the SNMPInterfaceCollector configuration, you will need to restart diamond.

Dependencies

• pysmnp

Options - Generic Options

Setting	Default	Description	Type
byte_unit	bit, byte,	Default numeric output(s)	list
enabled	False	Enable collecting these metrics	bool
measure_collector_time	False	Collect the collector run time in ms	bool
retries	3	Number of times to retry before bailing	int
timeout	5	Seconds before timing out the snmp connection	int

Example Output

__EXAMPLESHERE__