The ARTIK053s is a SOC for Wi-Fi™ IoT solutions. The ARTIK053s has a Wi-Fi subsystem, security subsystem, and application subsystem.
The Samsung ARTIK™ 053s Module is a highly integrated module for secure Internet of Things (IoT) devices that require Wi-Fi®. It is based on an ARM® Cortex® R4 core with on-chip memories, a complete 2.4GHz Wi-Fi® Phy, MAC layer processing, a large complement of standard digital buses, a PUF-based security system and power management. The module is packaged with additional external Flash memory, a hardware Secure Element and a single integrated 2.4GHz structural antenna. Aimed especially at power-sensitive devices needing Wi-Fi®, the ARTIK053s Module provides excellent performance in a variety of environments, with a feature set tailored specifically for IoT end nodes.
This guide is a summary. For more information, please see here.
$ git clone https://github.com/SamsungARTIK/TizenRT.git
$ cd TizenRT$ ./os/config.sh artik053s/nettest
$ make -C os$ make -C os download ALL XGPIO13(gpio42) SW702 |_|_| SW703 XGPIO15(gpio44)
XGPIO16(gpio45) LED703 |_|_| LED702 XGPIO20(gpio49)
___________ [CON708]
| | |_| SCL XI2C0_SCL
XGPIO14(gpio43) SW701 |_| | | |_| SDA XI2C0_SDA
| | |_| AREF
[CON710] | | |_| GND
NC |_| | | |_| 13 XSPI1_CLK
NC |_| | | |_| 12 XSPI1_MISO
RESET |_| | | |_| 11 XSPI1_MOSI
3.3V |_| | ARTIK053s | |_| 10 XSPI1_CSN
NC |_| | | |_| 9 XPWMTOUT_4
GND |_| | | |_| 8 XGPIO21(gpio50)
GND |_| | | [CON709]
Vin |_| | | |_| 7 XGPIO19(gpio48)
[CON711] | | |_| 6 XPWMTOUT_2
XADC0AIN0 A0 |_| |___________| |_| 5 XPWMTOUT_1 / XUART3_RTS
XADC0AIN1 A1 |_| |_| 4 XGPIO18(gpio47)
XADC0AIN2 A2 |_| |_| 3 XPWMTOUT_0 / XUART3_CTS
XADC0AIN3 A3 |_| |_| 2 XGPIO17(gpio46)
NC A4 |_| |_| 1 XUART0_TX
NC A5 |_| |_| 0 XUART0_RX
[CON705] [CON706]
2 4 6 2
1 3 5 1
[CON703]
2 4 6 8 10 12 14 16 18 20 22 24
1 3 5 7 9 11 13 15 17 19 21 23
[CON704]
2 4 6 8 10 12 14 16 18 20 22 24
1 3 5 7 9 11 13 15 17 19 21 23
XPWMTOUT_1 / XUART3_RTS 1 |_|_| 2 VCC_EXT3P3
XPWMTOUT_2 3 |_|_| 4 NC
XPWMTOUT_3 5 |_|_| 6 NC
XPWMTOUT_0 / XUART3_CTS 7 |_|_| 8 XI2C1_SCL
XUART1_RXD / XUART2_CTS 9 |_|_| 10 XI2C1_SDA
XUART1_TXD / XUART2_RTS 11 |_|_| 12 GND
XGPIO26(gpio55) / XI2S0_SDO 13 |_|_| 14 VCC_EXT3P3
XGPIO25(gpio54) / XI2S0_LRCK 15 |_|_| 16 XSPI0_CLK
XGPIO24(gpio53) / XI2S0_BCLK 17 |_|_| 18 XSPI0_CSN
XGPIO23(gpio52) 19 |_|_| 20 XSPI0_MISO
XGPIO22(gpio51) 21 |_|_| 22 XSPI0_MOSI
XEINT0(gpio57) 23 |_|_| 24 GND
XPWMTOUT_4 1 |_|_| 2 VCC_EXT3P3
XPWMTOUT_5 3 |_|_| 4 XUART2_RXD
XEINT2(gpio59) 5 |_|_| 6 XUART2_TXD
XEINT1(gpio58) 7 |_|_| 8 XUART3_RXD
XGPIO12(gpio41) 9 |_|_| 10 XUART3_TXD
XGPIO10(gpio39) / XSPI3_MISO 11 |_|_| 12 GND
XGPIO9(gpio38) / XSPI3_CSN 13 |_|_| 14 VCC_EXT3P3
XGPIO11(gpio40) / XSPI3_MOSI 15 |_|_| 16 XGPIO4(gpio33) / XSPI2_CLK
XGPIO8(gpio37) / XSPI3_CLK 17 |_|_| 18 XGPIO5(gpio34) / XSPI2_CSN
XGPIO2(gpio31) / XI2C3_SCL 19 |_|_| 20 XGPIO6(gpio35) / XSPI2_MISO
XGPIO1(gpio30) / XI2C2_SDA 21 |_|_| 22 XGPIO7(gpio36) / XSPI2_MOSI
XGPIO3(gpio32) / XI2C3_SDA 23 |_|_| 24 GND
- VCC_USB5P0: Use USB Power Source, when Pin 1 is connected to Pin 2 using a jumper.
- DC Jack: Use DC Jack Power Source, when Pin 3 is connected to Pin 4 using a jumper.
- Battery: User Battery Power Source, when battery is connected to CON706 and Pin 5 is connected to Pin 6 using a jumper.
The hardware pull status is as follows. The default values set in the TizenRT software can be found s5jt200_pinconfig.h.
| PinNo | Pin Name | Module Internal PULL | Module External PULL | RESET | PUD | FEATURE |
|---|---|---|---|---|---|---|
| 51 | XSPI0_CLK | - | - | I | PD | |
| 49 | XSPI0_CSN | - | - | I | PD | |
| 48 | XSPI0_MISO | - | - | I | PD | |
| 50 | XSPI0_MOSI | - | - | I | PD | |
| 72 | XSPI1_CLK | - | PU | I | PD | LED700 |
| 74 | XSPI1_CSN | - | - | I | PD | |
| 71 | XSPI1_MISO | - | - | I | PD | |
| 73 | XSPI1_MOSI | - | - | I | PD | |
| 53 | XUART1_RXD | - | - | I | PD | |
| 52 | XUART1_TXD | - | - | I | PD | |
| 54 | XUART2_RXD | - | - | I | PD | |
| 55 | XUART2_TXD | - | - | I | PD | |
| 56 | XUART3_RXD | - | - | I | PD | |
| 57 | XUART3_TXD | - | - | I | PD | |
| 42 | XPWMTOUT_0 | - | - | I | PD | |
| 41 | XPWMTOUT_1 | - | - | I | PD | |
| 44 | XPWMTOUT_2 | - | - | I | PD | |
| 45 | XPWMTOUT_3 | - | - | I | PD | |
| 40 | XPWMTOUT_4 | - | - | I | PD | |
| 43 | XPWMTOUT_5 | - | - | I | PD | |
| 70 | XGPIO0 | - | - | I | PD | |
| 68 | XGPIO1 | - | - | I | PD | |
| 65 | XGPIO2 | - | - | I | PD | |
| 69 | XGPIO3 | - | - | I | PD | |
| 66 | XGPIO4 | - | - | I | PD | |
| 67 | XGPIO5 | - | - | I | PD | |
| 62 | XGPIO6 | - | - | I | PD | |
| 64 | XGPIO7 | - | - | I | PD | |
| 63 | XGPIO8 | - | - | I | PD | |
| 60 | XGPIO9 | - | - | I | PD | |
| 59 | XGPIO10 | - | - | I | PD | |
| 61 | XGPIO11 | - | - | I | PD | |
| 58 | XGPIO12 | - | - | I | PD | |
| 10 | XGPIO13 | - | PU | I | PD | SW702 (for XLED TEST) |
| 9 | XGPIO14 | - | PU | I | PD | SW701 |
| 12 | XGPIO15 | - | PU | I | PD | SW703 (for XLED TEST) |
| 11 | XGPIO16 | - | PU | I | PD | LED (for XLED TEST) |
| 8 | XGPIO17 | - | - | I | PD | |
| 7 | XGPIO18 | - | - | I | PD | |
| 6 | XGPIO19 | - | - | I | PD | |
| 13 | XGPIO20 | - | PU | I | PD | LED (for XLED TEST) |
| 5 | XGPIO21 | - | - | I | PD | |
| 19 | XGPIO22 | - | - | I | PD | |
| 18 | XGPIO23 | - | - | I | PD | |
| 4 | XGPIO24 | - | - | I | PD | |
| 3 | XGPIO25 | - | - | I | PD | |
| 2 | XGPIO26 | - | - | I | PD | |
| 75 | XGPIO27 | - | - | I | PD | |
| 39 | XGPIO28 | - | - | I | PD | |
| 28 | XEINT0 | - | - | I | PD | |
| 30 | XEINT1 | - | - | I | PD | |
| 29 | XEINT2 | - | - | I | PD | |
| 33 | XI2C0_SCL | PU | I | PD | ||
| 34 | XI2C0_SDA | - | PU | I | PD | |
| 35 | XI2C1_SCL | - | PU | I | PD | |
| 36 | XI2C1_SDA | - | PU | I | PD | |
| 17 | XADC0AIN_3 | - | PD | |||
| 16 | XADC0AIN_2 | - | PD | |||
| 14 | XADC0AIN_1 | - | PD | |||
| 15 | XADC0AIN_0 | - | PD | |||
| 47 | RXD0 | - | PU | I | PD | connected LEVEL Shifter (Need to External PU) |
| 46 | TXD0 | - | PU | I | PD | connected LEVEL Shifter (Need to External PU) |
| 38 | XDEBUG_RXD | - | - | I | PD | for DEBUG (FT2232HL) |
| 37 | XDEBUG_TXD | - | - | I | PD | for DEBUG (FT2232HL) |
| 26 | XJTAG_TRST_N | - | - | I | PD | for DEBUG (FT2232HL) |
| 22 | XJTAG_TMS | - | PU | I | PU | for DEBUG (FT2232HL) |
| 24 | XJTAG_TCK | - | - | I | PD | for DEBUG (FT2232HL) |
| 23 | XJTAG_TDI | - | PU | I | PU | for DEBUG (FT2232HL) |
| 25 | XJTAG_TDO | - | - | I | PD | for DEBUG (FT2232HL) |
| 21 | XRESET_N | PU | - | I | PD | |
| 31 | PWR_RST | - | NA | NA | NA | Not Connected IC, DCDC IC Enable Pin |