Operation
If you bought the official PCB its already flashed with the latest firmware. You can flash or update the SmartPusher with the online flasher (Works with Chrome and MS Edge). With this you dont need to compile the firmware by youreself neither you need any software. https://blueforcer.github.io/SmartPusher/
When you power on the SmartPusher the first time it will enter the AP Mode
Connect your Smartphone or any other wifi device with the Accesspoint "SmartPusher". open a browser and navigate to 192.168.4.1.
Here you need to set up your Network and MQTT Broker
Click Save and then reboot.
https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv
SmartPusher responds by default to click, double click and long click. Due to the push mode, the buttons only react to down & up.
Here you can choose the LED behaviour
Off - permanent OFF
On - permanent ON
Fade - all LEDs will fade
Extern - controll the LEDs by your own via MQTT
OnPush - The LEDs will light up with animation when you press it