Adapter board for ESP-8266 ESP-12-E/F
R - RESET button is on the left side;
F - FLASH button is on the right side;
This project is heavily based on Node MCU 1.0. Still it is not a fork or copy, it's just a reinterpretation of given schematic in a new board with several simplifications. This boards takes less room (8x2.54mm) than the nodeMCU (10x2.54mm) or other popular adapter boards for ESP 7/12.
WARNING!
You can't use any PLS connector with current revision, while inner diameter of holes is 0.9 mm!
Modify it before manufacturing!
If you have any question or just want to contact me -- [email protected]
Andrew Shelestov 2017