Skip to content
This repository has been archived by the owner on Oct 27, 2021. It is now read-only.

Latest commit

 

History

History
286 lines (201 loc) · 7.67 KB

tutorial.md

File metadata and controls

286 lines (201 loc) · 7.67 KB
Raw

DarkFi User Tutorial

Welcome to the dark renaissance. This tutorial will teach you how to install darkfi on your system, and how to use the testnet to send and receive anonymous tokens.

Download

To run darkfi, we must first install the software. Do this by cloning the darkfi repo:

$ git clone https://github.com/darkrenaissance/darkfi

Build

In the project root directory, run provided Makefile. This will download the trusted setup params and compile the source code. This might take a while.

$ make

Install

We will now install the project. This will install the binaries and configurations in the configured namespace (/usr/local by default). The configurations are installed as TOML files in /usr/local/share/doc/darkfi. They have to be copied in your user's $HOME/.config/darkfi directory.

Feel free to review the installed config files, but you don't need to change anything to run the testnet. The defaults will work fine.

$ sudo make install
$ mkdir -p ~/.config/darkfi
$ cp -f /usr/local/share/doc/darkfi/*.toml ~/.config/darkfi

Run

Darkfi consists of several software daemons or processes. These daemons have seperate, isolated concerns.

As a user, your interest is in the darkfid daemon. This is a user node that interacts with your wallet and communicates with services on the darkfi network. It is operated using the drk command-line tool.

After the installation, you should have drk and darkfid binaries in /usr/local. Also, the params and configuration files should be in ~/.config/darkfi.

We're now ready to use the testnet.

Open two terminal windows. In one terminal, start darkfid:

$ darkfid -v

And another terminal, run drk. This is the command-line interface to interact with darkfid.

$ drk -h
drk

USAGE:
    drk [FLAGS] [OPTIONS] [SUBCOMMAND]

FLAGS:
    -h, --help       Prints help information
    -V, --version    Prints version information
    -v, --verbose    Increase verbosity

OPTIONS:
    -c, --config <CONFIG>    Sets a custom config file

SUBCOMMANDS:
    deposit     Deposit clear tokens for Dark tokens
    features    Show what features the cashier supports
    hello       Say hello to the RPC
    help        Prints this message or the help of the given subcommand(s)
    id          Get hexidecimal ID for token symbol
    transfer    Transfer Dark tokens to address
    wallet      Wallet operations
    withdraw    Withdraw Dark tokens for clear tokens

Deposit

We'll go through the main features one by one. Let's start by depositing some coins into darkfi.

First, we need testnet coins on either Bitcoin or Solana. For Bitcoin these can be acquired from a faucet like this one. You will need to switch your Bitcoin wallet to testnet mode.

If you don't have a Bitcoin wallet, Electrum is an excellent option. Configuring Electrum for testnet depends on the operating system: see this tutorial for more details.

For Solana, you can either install the Solana command-line suite or use sollet.

Follow this tutorial for the Solana command-line. For sollet.io, switch the network to testnet and click 'Request Airdrop' to airdrop yourself some testnet coins.

Now that we have testnet coins we can deposit into darkfi.

We'll do this by sending testnet coins to the darki cashier, which will issue darkened versions of the deposted coin. This process of darkening involves the cashier minting new anonymous tokens that are 1:1 redeemable for deposits. For example, if you deposit 1 BTC, you will receive 1 dBTC, or darkened SOL.

To deposit testnet BTC:

$ drk deposit btc --network bitcoin

To deposit testnet SOL:

$ drk deposit sol --network solana

To deposit any other asset:

$ drk deposit [ASSET] --network solana

This command will send a deposit request to the cashier. After running it, you should get an address printed to your terminal, like this:

Deposit your coins to the following address: "734JBp3FRPoDs6ibSMyq3CV9zyMiDeynxMQRbSxVvozN"

Using Bitcoin or Solana, deposit the desired tokens to the specified address. Wait a moment- it should take about 30 seconds to receive your deposit. You can follow the progress on the terminal window where you ran darkfid. Then check your updated balance, like so:

$ drk wallet --balances

+-------+--------+---------+
| token | amount | network |
+-------+--------+---------+
| SOL   | 1      | solana  |
+-------+--------+---------+

Send

Now that you have darkened tokens inside darkfi, you can send them around anonymously.

Find a friend with an account on darkfi and ask them for their darkfi address. Then run the transfer command:

$ drk transfer <TOKEN> <ADDRESS> <AMOUNT>

For example, to transfer 1 SOL to a user at 9GmLk7kkbxhsbLTYFMeg6FyuQJV9Na2GcJYFNrs3VLkv address, you would run the following command:

$ drk transfer sol 9GmLk7kkbxhsbLTYFMeg6FyuQJV9Na2GcJYFNrs3VLkv 1

Receive

To receive anonymous tokens your darkfid account, you must retrieve your darkfi address. Send this address to others so they can send you tokens.

$ drk wallet --address
    
Wallet address: "9GmLk7kkbxhsbLTYFMeg6FyuQJV9Na2GcJYFNrs3VLkv"

Withdraw

Withdrawing your testnet funds can be done at any time. This will exchange your anonymous darkened tokens for their underlying collaterol, i.e. if you have 1 dBTC you will receive 1 BTC.

To do so, simply send the following request to the cashier:

$ drk withdraw <TOKENSYM> <ADDRESS> <AMOUNT> --network <network>

For example, if you want to withdraw 0.5 SOL to the Solana address 4q7rkNvH5BVs6VLz6nyhKLvqXmwDyjGnUsE5sZzRNgp4, you would write:

$ drk withdraw sol 4q7rkNvH5BVs6VLz6nyhKLvqXmwDyjGnUsE5sZzRNgp4 0.5 --network solana

For Bitcoin, the command would look like this:

$ drk withdraw btc bc1qw7nt2yca0zykh8a5sc6nmy3r3clx4ha206wepn 0.5 --network bitcoin

Configure

DarkFi is highly configurable by design. Key system parameters can be changed inside the config files.

This is the darkfid config file. Your local copy can be found in ~/.config/darkfi.

## darkfid configuration file
##
## Please make sure you go through all the settings so you can configure
## your daemon properly.

# The address where darkfid should bind its RPC socket
rpc_listen_address = "127.0.0.1:8000"

# Whether to listen with TLS or plain TCP
serve_tls = false

# Path to DER-formatted PKCS#12 archive. (Unused if serve_tls=false)
# This can be created using openssl:
# openssl pkcs12 -export -out identity.pfx -inkey key.pem -in cert.pem -certfile chain_certs.pem
tls_identity_path = "~/.config/darkfi/darkfid_identity.pfx"

# Password for the created TLS identity. (Unused if serve_tls=false)
tls_identity_password = "FOOBAR"

# The endpoint to a gatewayd protocol API
gateway_protocol_url = "tcp://185.165.171.77:3333"

# The endpoint to a gatewayd publisher API
gateway_publisher_url = "tcp://185.165.171.77:4444"

# Path to mint.params
mint_params_path = "~/.config/darkfi/mint.params"

# Path to spend.params
spend_params_path = "~/.config/darkfi/spend.params"

# Path to the client database
database_path = "~/.config/darkfi/darkfid_client.db"

# Path to the wallet database
wallet_path = "~/.config/darkfi/darkfid_wallet.db"

# The wallet password
wallet_password = "TEST_PASSWORD"

# The configured cashiers to use.
[[cashiers]]

# Cashier name
name = "testnet.cashier.dark.fi"

# The RPC endpoint for a selected cashier
#rpc_url = "tcp://127.0.0.1:9000"
rpc_url = "tcp://185.165.171.77:9000"

# The selected cashier public key
public_key = "2MezH7FrtzGwtEEeTU8anM2b67Nzfv8XsojggGUavCUd"