How to config an onvif camera with three streams

[latel]

log:
  level: debug

streams:
  Hikvision:
    - rtsp://admin:[email protected]:554/Streaming/Channels/101
    - rtsp://admin:[email protected]:554/Streaming/Channels/102
    - rtsp://admin:[email protected]:554/Streaming/Channels/103

how do I turn into something like this?

streams:
  Hikvision:
    - onvif://admin:[email protected]

[AlexxIT]

Open WebUI > Add > ONVIF. Add your stream and check response.

[latel]

the detected source format looks pretty wired.

[AlexxIT]

Add your link with user/pass to test line

[latel]

If I have a camera with three streams, how can I add them to go2rtc and then integrate them into Scrypted? Typically, when I add my camera to Scrypted using ONVIF, all streams become available in the Scrypted camera settings(screenshots below), and Scrypted can switch to a different stream—such as a low-resolution one—when the network is not good. If I add the camera via go2rtc, should I define the three streams individually and then add them to Scrypted individually?

[AlexxIT]

If you have one camera with different resolutions - you should add them to go2rtc as separate streams.
go2rtc doesn't have auto switch feature based on bandwidth.

[latel]

Thank you for your guidance. One last question: After I connect the camera to go2rtc and then integrate it with other platforms like Scrypted or Home Assistant, can I still retain the two-way audio capability? As far as I know, this relies on the ONVIF protocol, and I noticed that go2rtc doesn’t support re-exposing as ONVIF, only supports RTSP.

[AlexxIT]

1. In truth, you don't need ONVIF protocol support there. Two way works over RTSP protocol with backchannel support. But such a standard has no name. But ONVIF Profile T has a name.
2. Go2rtc not support exposing RTSP with backchannel (yet).
3. Go2rtc support exposing ONVIF.
4. Home Assistant core doesn't support two way audio out of box (yet)
5. You can add your camera to go2rtc AND to Scrypted simultaneously.