Highpower LED Chip 10W 350mA

[DarthWeber]

Hi, is there any way to drive those high power LEDs which needs 350mA constant current with WLED ?

Take a look at the wiki and FAQ, perhaps your question is already answered!
FAQ

Please consider asking your question on the WLED forum or Discord
Forum
Discord
What to post where?

If you do not like to use these platforms, delete this template and ask away!
Please keep in mind though that the issue section is generally not the preferred place for general questions.

[Aircoookie]

Can you send a link to the LED you want to use?
Most likely you can drive it with WLED, but will need extra circuitry.

[blazoncek]

That is what I use.
You need MOSFET as IRLZ044N.

[DarthWeber]

@aircookie for example https://www.ebay.de/itm/161057358276?mkevt=1&mkcid=1&mkrid=707-53477-19255-0&campid=5338364437&customid=161057358276_12576&toolid=11000

@blazoncek Is there any circuit diagram ? Or pics ? Not sure which board i should use and how to connect the MOSFET

[blazoncek]

Any googling will do.

[DarthWeber]

@blazoncek Thanks, but i am not experienced enough to get this connected to my board - above that i expect this will be driven by PWM and since i have at least two LEDs, i do not know which board is suitable.

In the meanwhile i found https://www.led-genial.de/Power-Dot-10W-WS2811-kompatibel which seems to be pretty easy to use with the Wemos mini board.

[blazoncek]

Look for @srg74 ESP-01 board on Tindie or @intermittech QuilnLED-Quad controller. They offer PWM circuitry.

[blazoncek]

[pyr0ball]

try one of these!
https://www.aliexpress.com/item/32798198341.html

If you need something like the above, but a different form-factor, you'll need someone to design you a custom carrier.

[blazoncek]

try one of these! https://www.aliexpress.com/item/32798198341.html

If you need something like the above, but a different form-factor, you'll need someone to design you a custom carrier.

These are digital. Mine is analog.
I guess OP wanted analog LEDs.

[stale]

Hey! This issue has been open for quite some time without any new comments now. It will be closed automatically in a week if no further activity occurs.
Thank you for using WLED!