Only the first IR Transmitter is work #10

yauyauwind · 2023-12-05T09:06:46Z

Hello AdamKGoddard,

I use with HA and ESPhome latest version, and I use to remote my Panasonic LED Lamp
I use Receive RAW code to capture 3 button
Power off, Night Mode, Light Mode

Here is my ESPHome Config file

remote_receiver:
pin:
number: GPIO27
inverted: True
dump: raw
idle: 40ms

remote_transmitter:
pin:
number: GPIO26
inverted: True
carrier_duty_percent: 50%
id: xiaomi

switch:

platform: restart
name: ${friendly_name} Restart
platform: template
name: "BedRoom LED Night"
turn_on_action:
- remote_transmitter.transmit_raw:
  carrier_frequency: 38kHz
  code: [3524, -1665, 419, -428, 419, -1301, 419, -428, 419, -1302, 419, -427, 419, -1302, 419, -428, 418, -1302, 418, -429, 418, -429, 417, -429, 417, -1303, 418, -429, 418, -1302, 418, -1302, 418, -430, 416, -1303, 418, -429, 417, -429, 417, -429, 417, -1302, 417, -1305, 417, -1302, 418, -428, 418, -1303, 417, -430, 417, -1302, 418, -429, 418, -1302, 417, -1302, 418, -428, 418, -428, 418, -429, 417, -428, 418, -428, 417, -428, 418, -428, 418, -428, 417, -429, 418, -427, 418, -1302, 418, -427, 418, -1302, 418, -429, 418, -1302, 418, -428, 419, -428, 417, -429, 418, -1302, 418, -428, 418, -428, 419, -428, 419, -427, 419, -1301, 419, -428, 419, -427, 419, -1301, 419, -428, 418, -428, 419, -427, 419, -1301, 419, -428, 419, -1301, 419, -1300, 420]
platform: template
name: "BedRoom LED OFF"
turn_on_action:
- remote_transmitter.transmit_raw:
  carrier_frequency: 38kHz
  code: [3477, -1713, 372, -475, 372, -1349, 372, -475, 371, -1349, 372, -474, 372, -1349, 372, -476, 370, -1350, 371, -475, 371, -476, 371, -475, 372, -1349, 372, -475, 371, -1349, 372, -1349, 372, -475, 372, -1349, 372, -475, 371, -475, 371, -476, 371, -1349, 371, -1349, 372, -1349, 372, -475, 371, -1350, 371, -475, 371, -1349, 373, -475, 371, -1349, 372, -1348, 373, -475, 371, -475, 371, -475, 371, -476, 371, -475, 371, -475, 371, -475, 372, -475, 371, -475, 372, -475, 372, -475, 371, -1350, 371, -476, 371, -475, 372, -475, 371, -474, 372, -475, 372, -475, 371, -1350, 371, -475, 372, -474, 372, -475, 371, -475, 371, -1350, 371, -475, 372, -475, 371, -1350, 372, -475, 371, -475, 372, -475, 371, -1350, 372, -1349, 372, -475, 372, -1349, 372]
platform: template
name: "BedRoom LED Light"
turn_on_action:
- remote_transmitter.transmit_raw:
  carrier_frequency: 38kHz
  code: [3479, -1711, 374, -474, 372, -1348, 373, -475, 372, -1348, 372, -474, 373, -1348, 373, -474, 372, -1348, 372, -474, 372, -475, 372, -474, 372, -1348, 373, -474, 373, -1347, 373, -1348, 373, -474, 372, -1348, 373, -473, 373, -474, 372, -474, 373, -1347, 374, -1348, 372, -1348, 373, -473, 373, -1348, 373, -474, 372, -1348, 373, -474, 372, -1348, 373, -1349, 372, -474, 373, -474, 372, -475, 372, -473, 373, -474, 373, -474, 372, -475, 372, -474, 372, -474, 372, -475, 372, -1348, 373, -474, 372, -1348, 373, -474, 373, -1348, 373, -1347, 373, -1349, 372, -475, 372, -1348, 373, -474, 373, -473, 373, -473, 373, -474, 372, -1348, 373, -474, 372, -475, 372, -1348, 373, -474, 373, -474, 372, -474, 373, -1348, 372, -475, 372, -1348, 372, -474, 373,]

I found that, the Transmit button can be work only the once
If I press the button on off then the Night and Light is not work
after I reboot the XiaomiIR, then I can work only once on any button
like: I press Night mode, then work, after that press Power off button is not work
mean the IR can be only work once on the first times booted

I confirm the capture code is work, how can I fix this issue??

Many Thanks~

AdamKGoddard · 2023-12-23T07:33:56Z

Sorry, I was away on holidays. I just checked using your examples, not rebooting? Is your device getting hot? Did you add the correct files as per the guide?

Here's my log output while pressing random buttons:

18:28:31 [D] [switch:012]
'BedRoom LED OFF' Turning ON.
18:28:31 [I] [remote.raw:041]
Received Raw: 223, -1597, 117, -3241, 178, -4170, 72, -5066, 148, -4946, 127, -2075, 197, -6194, 164, -1466, 89, -2964, 128, -3754, 80, -4135, 71, -441, 427, -6721, 85, -7548, 102, -13276, 199
18:28:32 [D] [switch:012]
'BedRoom LED Night' Turning ON.
18:28:32 [I] [remote.raw:041]
Received Raw: 353, -3002, 96, -222, 100, -3102, 166, -6025, 187, -669, 302, -6494, 170, -307, 82, -1846, 318, -12583, 351, -2978, 338, -761, 109, -435, 78, -3409, 281
18:28:32 [D] [switch:012]
'BedRoom LED Night' Turning ON.
18:28:32 [I] [remote.raw:041]
Received Raw: 135, -1402, 72, -2474, 102, -3396, 364, -309, 229, -2413, 156, -2422, 168, -2356, 160, -2601, 286, -1300, 84, -16925, 206, -4946, 158, -12652, 117
18:28:33 [D] [switch:012]
'BedRoom LED Light' Turning ON.
18:28:34 [I] [remote.raw:041]
Received Raw: 171, -489, 462, -1212, 68, -992, 274, -13114, 170, -31302, 268, -13557, 179
18:28:34 [D] [switch:012]
'BedRoom LED Light' Turning ON.
18:28:34 [I] [remote.raw:041]
Received Raw: 547, -283, 742, -1734, 233, -5333, 194, -6909, 129, -2446, 117, -11354, 246, -4480, 219, -6558, 251, -382, 464, -5831, 84, -1637, 77, -2452, 134, -1322, 168
18:28:35 [D] [switch:012]
'BedRoom LED Night' Turning ON.
18:28:35 [I] [remote.raw:041]
Received Raw: 110, -22949, 164, -4925, 224, -407, 70
18:28:35 [D] [switch:012]
'BedRoom LED Night' Turning ON.
18:28:35 [I] [remote.raw:041]
Received Raw: 170, -4973, 160, -4141, 220, -9986, 177, -5907, 90, -2485, 76, -2041, 76, -2633, 117, -15504, 68, -10066, 71, -5765, 85
18:28:36 [D] [switch:012]
'BedRoom LED OFF' Turning ON.
18:28:36 [I] [remote.raw:041]
Received Raw: 166, -8334, 84, -4602, 101, -9300, 128, -4894, 189, -4500, 117, -7328, 80, -9140, 196, -494, 89, -9527, 83
18:28:36 [D] [switch:012]
'BedRoom LED OFF' Turning ON.
18:28:36 [I] [remote.raw:041]
Received Raw: 78, -25233, 437, -10841, 262, -3278, 104, -527, 319, -395, 401, -1470, 79, -6562, 150, -8733, 88

yauyauwind · 2023-12-27T03:17:30Z

Hello AdamKGoddard,

Happy Holiday, and I have verified my config once, I confirm both pre_extra_script.py and remote_transmitter_esp32.cpp in config/esphome folder

and I just modify the xiaomi_ir.yaml for the token and leave the GPIO setting to default

I have no idea why the only 1st times shoot the transmit is work

Thanks~

madspeed · 2024-02-26T12:19:39Z

I have the same issue. I manage to get switch working only one time after reboot. Did you manage to fix it?

madspeed · 2024-02-26T12:23:27Z

This is what I get:

1```

5:21:36	[D]	[switch:012]	'Power' Turning ON.
15:21:36	[W]	[component:214]	Component web_server took a long time for an operation (0.07 s).
15:21:36	[W]	[component:215]	Components should block for at most 20-30ms.
15:21:36	[I]	[remote.jvc:049]	Received JVC: data=0x20DF
15:21:36	[I]	[remote.lg:054]	Received LG: data=0x20DF10EF, nbits=32
15:21:36	[I]	[remote.nec:098]	Received NEC: address=0xFB04, command=0xF708 command_repeats=1
15:21:36	[I]	[remote.pioneer:149]	Received Pioneer: rc_code_X=0x2008
15:21:36	[I]	[remote.pronto:233]	Received Pronto: data=
15:21:36	[I]	[remote.pronto:235]	0000 006D 0022 0000 0133 009B 0016 0016 0014 0018 0016 003F 0016 0016 0014 0018 0016 0017 0016 0016 0016 0016 0016 003F 0016 003F 0014 0018 0016 003F 0016 003F 0014 0041 0016 003F 0016 003F 0016 0017 0016 0016 0016 0016 0016 003F
15:21:36	[I]	[remote.pronto:235]	0016 0017 0015 0016 0016 0016 0016 0017 0016 003F 0014 0041 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 001A 0181 06C3
15:21:40	[D]	[switch:012]	'Power' Turning ON.
15:21:41	[W]	[component:214]	Component web_server took a long time for an operation (0.07 s).
15:21:41	[W]	[component:215]	Components should block for at most 20-30ms.
15:21:41	[I]	[remote.pronto:233]	Received Pronto: data=
15:21:41	[I]	[remote.pronto:235]	0000 006D 0029 0000 000C 0008 0019 000A 0060 000D 000F 000D 0022 0011 002F 0009 000A 009F 0012 0023 0009 001E 000F 003D 0008 0024 0017 0042 0015 0017 0016 0023 0009 0047 000D 0041 0015 001B 0010 0043 0013 003D 0017 003E 0007 000A
15:21:41	[I]	[remote.pronto:235]	0006 003E 0017 003E 0017 0016 0014 001F 0006 0025 0010 003E 0016 0016 0017 0015 0017 0019 0004 000A 0007 0014 000E 0047 0017 003E 0017 003F 0015 0024 0008 003E 0018 003D 0016 003F 000C 0048 001F 0181 06C3





So remote.lg is used only once when first time pressed

AdamKGoddard · 2024-02-26T20:22:28Z

Can you send the config? I couldn't replicate the other issue

madspeed · 2024-03-02T07:05:34Z

esphome:
  name: esphome-xiaomi-ir
  friendly_name: ESPHome Xiaomi IR
  platformio_options:
    extra_scripts: 
      - pre:/config/esphome/pre_extra_script.py

esp32:
  board: esp32doit-devkit-v1
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_FREERTOS_UNICORE: y
    advanced:
      ignore_efuse_mac_crc: true

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: 

ota:
  password: "46d0d39267fe6ec26c27d5e1aeb19b4a"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Xiaomi-Ir Fallback Hotspot"
    password: "12344321"

captive_portal:
    
web_server:
  port: 80
  
binary_sensor:
  - platform: gpio
    pin:
      number: GPIO32
      inverted: False
    name: ${friendly_name} Button A
        
  - platform: gpio
    pin:
      number: GPIO33
      inverted: False
    name: ${friendly_name} Button B
                
  - platform: gpio
    pin:
      number: GPIO34
      inverted: False
    name: ${friendly_name} Button C
                
  - platform: gpio
    pin:
      number: GPIO35
      inverted: False
    name: ${friendly_name} Button D

status_led:
  pin:
    number: GPIO18  #Orange LED - flashes for status events
    inverted: True
    
output:
  - platform: gpio
    pin: GPIO23     #Blue LED - Powered on always
    id: PowerLED
    inverted: False #Change to True to disable the power LED
    
sensor:
  - platform: wifi_signal
    name: ${friendly_name} WiFi Signal
    
  - platform: uptime
    name: ${friendly_name} Uptime

switch:
  - platform: restart
    name: ${friendly_name} Restart

  - platform: template
    name: "Power"
    turn_on_action:
      - remote_transmitter.transmit_lg:
          data: 0x20DF10EF
          nbits: 32


remote_receiver:
  pin:
    number: GPIO27
    inverted: True
  dump: all

remote_transmitter:
  pin:
    number: GPIO26
    inverted: True
  carrier_duty_percent: 50%
  id: xiaomi

AdamKGoddard · 2024-03-02T08:54:39Z

Works fine for me?

AdamKGoddard · 2024-03-02T08:59:41Z

Or are you expecting to see exactly what you transmit on the receive? I wouldn't always consider that a reliable signal input whilst transmitting is occuring. I would consider receive as best effort and there are so many reflections and other IR noise to consider. It may bring it out of a guaranteed LG receive and Pronto or Raw would be close enough within a few ms timings to be fair.

madspeed · 2024-03-02T09:04:15Z

Should there be any information in the log about what I transmit?

ywlau · 2024-11-20T15:39:55Z

I encountered the same issue as yauyauwind and madspeed.

I found a temporary fix by commenting out a few lines of code in remote_transmitter_esp32.cpp, specifically in the RemoteTransmitterComponent::send_internal() function (lines 80–83):

// if (this->current_carrier_frequency_ != this->temp_.get_carrier_frequency()) {
this->current_carrier_frequency_ = this->temp_.get_carrier_frequency();
this->configure_rmt_();
// }

This modification essentially calls this->configure_rmt_() for each transmission.

I'm not sure why this adjustment is necessary or if it could negatively affect the RMT peripheral in the long run.

AdamKGoddard self-assigned this Dec 23, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Only the first IR Transmitter is work #10

Only the first IR Transmitter is work #10

yauyauwind commented Dec 5, 2023 •

edited

Loading

AdamKGoddard commented Dec 23, 2023

yauyauwind commented Dec 27, 2023

madspeed commented Feb 26, 2024

madspeed commented Feb 26, 2024 •

edited

Loading

AdamKGoddard commented Feb 26, 2024

madspeed commented Mar 2, 2024 •

edited

Loading

AdamKGoddard commented Mar 2, 2024

AdamKGoddard commented Mar 2, 2024

madspeed commented Mar 2, 2024

ywlau commented Nov 20, 2024

Only the first IR Transmitter is work #10

Only the first IR Transmitter is work #10

Comments

yauyauwind commented Dec 5, 2023 • edited Loading

AdamKGoddard commented Dec 23, 2023

yauyauwind commented Dec 27, 2023

madspeed commented Feb 26, 2024

madspeed commented Feb 26, 2024 • edited Loading

AdamKGoddard commented Feb 26, 2024

madspeed commented Mar 2, 2024 • edited Loading

AdamKGoddard commented Mar 2, 2024

AdamKGoddard commented Mar 2, 2024

madspeed commented Mar 2, 2024

ywlau commented Nov 20, 2024

yauyauwind commented Dec 5, 2023 •

edited

Loading

madspeed commented Feb 26, 2024 •

edited

Loading

madspeed commented Mar 2, 2024 •

edited

Loading