tested boundry with output conversion

dbw/test/test_boundry_output.py

@@ -0,0 +1,62 @@
+# tests that each set of inputs results in outputs in the correct range
+
+import numpy as np
+
+lin_vel_step_size = 1/128
+lin_vel_min       = -250  # km/hr
+lin_vel_eff_max   =  40   # km/h
+
+ang_vel_step_size = 1/1024
+ang_vel_min       = -31.25 # rad/s
+ang_vel_eff_max   =  31.25 # rad/s
+
+lin_percent_range  = 100.0
+ang_percent_range  = 200.0
+ang_percent_offset = 100.0
+
+lin_offset    = abs(lin_vel_min / lin_vel_step_size)
+lin_spd_range = lin_vel_eff_max / lin_vel_step_size
+
+ang_offset    = abs(ang_vel_min / ang_vel_step_size)
+ang_spd_range = (ang_vel_eff_max - ang_vel_min) / ang_vel_step_size
+
+throttle_cmd_new = []
+steering_cmd_new = []
+
+for i in range(11):
+    throttle_percentage = 150 * i/10
+    steering_percentage = 200 * i/10 - 150
+
+    gear = i%3
+
+    if throttle_percentage < 0:
+        throttle_percentage = 0
+        print("WARNING: throttle percentage below range")
+    elif throttle_percentage > 100:
+        throttle_percentage = 100
+        print("WARNING: throttle percentage above range")
+
+    if steering_percentage < -100:
+        steering_percentage = -100
+        print("WARNING: steering percentage below range")
+    elif steering_percentage > 100:
+        steering_percentage = 100
+        print("WARNING: steering percentage above range")
+
+    if gear == 1:
+        print('gear: forward')
+        throttle_cmd = np.uint16(lin_spd_range *  throttle_percentage / lin_percent_range + lin_offset)
+    elif gear == 2:
+        print('gear: backward')
+        throttle_cmd = np.uint16(lin_spd_range * -throttle_percentage / lin_percent_range + lin_offset)
+    else:
+        print('gear: neutral')
+        throttle_cmd = np.uint16(lin_offset)
+
+    throttle_cmd_new.append(throttle_cmd)
+
+    steering_cmd = np.uint16(ang_spd_range * (steering_percentage + ang_percent_offset) / ang_percent_range)
+    steering_cmd_new.append(steering_cmd)
+
+print(throttle_cmd_new)
+print(steering_cmd_new)