Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Develop Board Bringup Procedures #28

Open
6 of 15 tasks
ADKaster opened this issue Aug 30, 2017 · 1 comment
Open
6 of 15 tasks

Develop Board Bringup Procedures #28

ADKaster opened this issue Aug 30, 2017 · 1 comment
Assignees
@dschonholtz @evomalley
Labels
help wanted
Milestone
End-to-End

Comments

@ADKaster
Copy link
Contributor

ADKaster commented Aug 30, 2017 •
edited
Loading

Steps to include:

  1. visual inspection
  2. DMM check for likely (fine pitch) and especially severe (power to ground) shorts
  3. Apply power and make sure nothing blows up or gets really hot
  4. Load an MCU image that initializes clocks and blinks a heartbeat LED
  5. Peripheral tests, module by module

Hardware Tests Developed:

  • Visual Inspection
  • Digital Multimeter Line checking
  • Power on test

Chip Programming Tests Developed:

  • LED Image Test

Peripheral Tests Developed:

  • GPIO/Interrupt Pins

  • USB

  • USART in SPI Master Mode for each peripheral below:

    • Altimeter
    • Flash memory
    • Accelerometers
    • Gyroscopes
    • Magnetometers
    • High G Accelerometer
    • XBEE
    • GPS
@ADKaster ADKaster added this to the End-to-End milestone Aug 30, 2017
@tkindy tkindy removed their assignment Sep 16, 2017
@ADKaster
Copy link
Contributor Author

Required rework Google doc

Required rework photograph:

all_eco_10_19_2017

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@dschonholtz dschonholtz

@evomalley evomalley

Labels
help wanted
Projects
None yet
Milestone
End-to-End
Development

No branches or pull requests
4 participants
@tkindy @ADKaster @dschonholtz @evomalley